Add wakeup-source property to enable Wake on Lan functionality in the switch. Since PME wake pin is not always attached to the SoC, use wakeup-source instead of wakeup-gpios Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx> --- Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml index e51be1ac03623..26385ba624245 100644 --- a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml +++ b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml @@ -49,6 +49,8 @@ properties: Set if the output SYNCLKO clock should be disabled. Do not mix with microchip,synclko-125. + wakeup-source: true + required: - compatible - reg -- 2.39.2