Add the initial device tree support for the Reference Design
Platform(RDP) 434 based on IPQ5018 family of SoC. This patch
carries the support for Console UART and eMMC.
Signed-off-by: Hariharan K <quic_harihk@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/ipq5018-rdp434.dts | 49 +++++++++++++++++++++
2 files changed, 50 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/ipq5018-rdp434.dts
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 6334e552b7c1..8a764e37330f 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -5,6 +5,7 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8094-sony-xperia-kitakami-karin_windy.dtb
dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb
dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq5018-rdp432-c2.dtb
+dtb-$(CONFIG_ARCH_QCOM) += ipq5018-rdp434.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp441.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp442.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp468.dtb
diff --git a/arch/arm64/boot/dts/qcom/ipq5018-rdp434.dts b/arch/arm64/boot/dts/qcom/ipq5018-rdp434.dts
new file mode 100644
index 000000000000..1684739e40ab
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq5018-rdp434.dts
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * IPQ5018 MP03.6-C2 board device tree source
+ * Copyright (c) 2023, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "ipq5018-rdp-common.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. IPQ5018/AP-MP03.6-C2";
+ compatible = "qcom,ipq5018-ap-mp03.6-c2", "qcom,ipq5018";
+};
+
+&sdhc_1 {
+ pinctrl-0 = <&sdc_default_state>;
+ pinctrl-names = "default";
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ max-frequency = <192000000>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&tlmm {
+ sdc_default_state: sdc-default-state {
+ clk-pins {
+ pins = "gpio9";
+ function = "sdc1_clk";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ cmd-pins {
+ pins = "gpio8";
+ function = "sdc1_cmd";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ data-pins {
+ pins = "gpio4", "gpio5", "gpio6", "gpio7";
+ function = "sdc1_data";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+};
--
2.17.1
