On Wed, Jul 19, 2023 at 2:19 PM Conor Dooley <conor@xxxxxxxxxx> wrote: > > Hey Tomasz, > > On Wed, Jul 19, 2023 at 12:33:47PM -0700, Tomasz Jeznach wrote: > > From: Anup Patel <apatel@xxxxxxxxxxxxxxxx> > > > > We add DT bindings document for RISC-V IOMMU platform and PCI devices > > defined by the RISC-V IOMMU specification. > > > > Signed-off-by: Anup Patel <apatel@xxxxxxxxxxxxxxxx> > > Your signoff is missing from here. > > Secondly, as get_maintainer.pl would have told you, dt-bindings patches > need to be sent to the dt-binding maintainers and list. > +CC maintainers & list. > > Thirdly, dt-binding patches should come before their users. > > > --- > > .../bindings/iommu/riscv,iommu.yaml | 146 ++++++++++++++++++ > > 1 file changed, 146 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/iommu/riscv,iommu.yaml > > > > diff --git a/Documentation/devicetree/bindings/iommu/riscv,iommu.yaml b/Documentation/devicetree/bindings/iommu/riscv,iommu.yaml > > new file mode 100644 > > index 000000000000..8a9aedb61768 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/iommu/riscv,iommu.yaml > > @@ -0,0 +1,146 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/iommu/riscv,iommu.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: RISC-V IOMMU Implementation > > + > > +maintainers: > > + - Tomasz Jeznach <tjeznach@xxxxxxxxxxxx> > > What about Anup, who seems to have written this? > Or your co-authors of the drivers? > > > + > > +description: > > + The RISC-V IOMMU specificaiton defines an IOMMU for RISC-V platforms typo > > + which can be a regular platform device or a PCI device connected to > > + the host root port. > > + > > + The RISC-V IOMMU provides two stage translation, device directory table, > > + command queue and fault reporting as wired interrupt or MSIx event for > > + both PCI and platform devices. TBC, you want a PCI device that's an IOMMU and the IOMMU serves (provides translation for) PCI devices? > > + > > + Visit https://github.com/riscv-non-isa/riscv-iommu for more details. > > + > > +properties: > > + compatible: > > + oneOf: > > + - description: RISC-V IOMMU as a platform device "platform device" is a Linux term. Don't use Linux terms in bindings. > > + items: > > + - enum: > > + - vendor,chip-iommu > > These dummy compatibles are not valid, as was pointed out to Anup on > the AIA series. Please go look at what was done there instead: > https://lore.kernel.org/all/20230719113542.2293295-7-apatel@xxxxxxxxxxxxxxxx/ > > > + - const: riscv,iommu > > + > > + - description: RISC-V IOMMU as a PCI device connected to root port > > + items: > > + - enum: > > + - vendor,chip-pci-iommu > > + - const: riscv,pci-iommu > > I'm not really au fait with the arm smmu stuff, but do any of its > versions support being connected to a root port? PCI devices have a defined format for the compatible string based on VID/PID. For PCI, also usually don't need to be described in DT because they are discoverable. The exception is when there's parts which aren't. Which parts aren't? > > + reg: > > + maxItems: 1 > > + description: > > + For RISC-V IOMMU as a platform device, this represents the MMIO base > > + address of registers. > > + > > + For RISC-V IOMMU as a PCI device, this represents the PCI-PCI bridge Your IOMMU is also a PCI-PCI bridge? Is that a normal PCI thing? > > + details as described in Documentation/devicetree/bindings/pci/pci.txt Don't refer to pci.txt. It is going to be removed. > > + > > + '#iommu-cells': > > + const: 2 > > + description: | > > |s are only needed where formatting needs to be preserved. > > > + Each IOMMU specifier represents the base device ID and number of > > + device IDs. Doesn't that assume device IDs are contiguous? Generally not a safe assumption. > > + > > + interrupts: > > + minItems: 1 > > + maxItems: 16 > > What are any of these interrupts? > > > + description: > > + The presence of this property implies that given RISC-V IOMMU uses > > + wired interrupts to notify the RISC-V HARTS (or CPUs). > > + > > + msi-parent: > > + description: > > + The presence of this property implies that given RISC-V IOMMU uses > > + MSIx to notify the RISC-V HARTs (or CPUs). This property should be > > + considered only when the interrupts property is absent. This doesn't make sense for a PCI device. PCI defines its own way to describe MSI support. > > + > > + dma-coherent: > > RISC-V is dma-coherent by default, should this not be dma-noncoherent > instead? > > > + description: > > + Present if page table walks and DMA accessed made by the RISC-V IOMMU > > + are cache coherent with the CPU. > > + > > + power-domains: > > + maxItems: 1 > > + > > +required: > > + - compatible > > + - reg > > + - '#iommu-cells' > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + /* Example 1 (IOMMU platform device with wired interrupts) */ > > + immu1: iommu@1bccd000 { > > Why is this "immu"? typo or intentional? > > > + compatible = "vendor,chip-iommu", "riscv,iommu"; > > + reg = <0x1bccd000 0x1000>; > > + interrupt-parent = <&aplic_smode>; > > + interrupts = <32 4>, <33 4>, <34 4>, <35 4>; > > + #iommu-cells = <2>; > > + }; > > + > > + /* Device with two IOMMU device IDs, 0 and 7 */ > > + master1 { > > + iommus = <&immu1 0 1>, <&immu1 7 1>; > > + }; > > + > > + - | > > + /* Example 2 (IOMMU platform device with MSIs) */ > > + immu2: iommu@1bcdd000 { > > + compatible = "vendor,chip-iommu", "riscv,iommu"; > > + reg = <0x1bccd000 0x1000>; > > + msi-parent = <&imsics_smode>; > > + #iommu-cells = <2>; > > + }; > > + > > + bus { > > + #address-cells = <2>; > > + #size-cells = <2>; > > + > > + /* Device with IOMMU device IDs ranging from 32 to 64 */ > > + master1 { > > + iommus = <&immu2 32 32>; > > + }; > > + > > + pcie@40000000 { > > + compatible = "pci-host-cam-generic"; > > + device_type = "pci"; > > + #address-cells = <3>; > > + #size-cells = <2>; > > + bus-range = <0x0 0x1>; > > + > > + /* CPU_PHYSICAL(2) SIZE(2) */ I'm guessing there was more after this, but I don't have it... Guessing, immu2 is a PCI device, but it translates for master1 which is not a PCI device? Weird. Why would anyone build such a thing? Rob
