When of_overlay_fdt_apply() fails, the changeset may be partially
applied, and the caller is still expected to call of_overlay_remove() to
clean up this partial state. However, overlay_17 is the only test that
takes care of cleaning up after an (expected) failure.
Instead of adding cleanup code to each individual test, extend
overlay_info with the optional expected return value of
of_overlay_remove(), and handle cleanup in the overlay_data_apply()
helper. While at it, simplify the end marker in the overlay_info table.
Update the expected error output for errors during the newly cleanup.
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
drivers/of/unittest.c | 130 +++++++++++++++++++++++++++---------------
1 file changed, 83 insertions(+), 47 deletions(-)
diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c
index 4c21c8ce99b9d8ff..86e109cc5a5385ba 100644
--- a/drivers/of/unittest.c
+++ b/drivers/of/unittest.c
@@ -2956,12 +2956,6 @@ static void __init of_unittest_overlay_notify(void)
unittest(ovcs_id, "ovcs_id not created for overlay_17\n");
- if (ovcs_id) {
- ret = of_overlay_remove(&ovcs_id);
- unittest(!ret,
- "overlay_17 of_overlay_remove(), ret = %d\n", ret);
- }
-
/* --- overlay 18 --- */
unittest(overlay_data_apply("overlay_18", &ovcs_id),
@@ -3249,17 +3243,19 @@ static void __init of_unittest_lifecycle(void)
extern uint8_t __dtbo_##overlay_name##_begin[]; \
extern uint8_t __dtbo_##overlay_name##_end[]
-#define OVERLAY_INFO(overlay_name, expected) \
-{ .dtbo_begin = __dtbo_##overlay_name##_begin, \
- .dtbo_end = __dtbo_##overlay_name##_end, \
- .expected_result = expected, \
- .name = #overlay_name, \
+#define OVERLAY_INFO(overlay_name, expected, expected_remove) \
+{ .dtbo_begin = __dtbo_##overlay_name##_begin, \
+ .dtbo_end = __dtbo_##overlay_name##_end, \
+ .expected_result = expected, \
+ .expected_result_remove = expected_remove, \
+ .name = #overlay_name, \
}
struct overlay_info {
uint8_t *dtbo_begin;
uint8_t *dtbo_end;
int expected_result;
+ int expected_result_remove; /* if apply failed */
int ovcs_id;
char *name;
};
@@ -3299,40 +3295,40 @@ OVERLAY_INFO_EXTERN(overlay_bad_symbol);
/* entries found by name */
static struct overlay_info overlays[] = {
- OVERLAY_INFO(overlay_base, -9999),
- OVERLAY_INFO(overlay, 0),
- OVERLAY_INFO(overlay_0, 0),
- OVERLAY_INFO(overlay_1, 0),
- OVERLAY_INFO(overlay_2, 0),
- OVERLAY_INFO(overlay_3, 0),
- OVERLAY_INFO(overlay_4, 0),
- OVERLAY_INFO(overlay_5, 0),
- OVERLAY_INFO(overlay_6, 0),
- OVERLAY_INFO(overlay_7, 0),
- OVERLAY_INFO(overlay_8, 0),
- OVERLAY_INFO(overlay_9, 0),
- OVERLAY_INFO(overlay_10, 0),
- OVERLAY_INFO(overlay_11, 0),
- OVERLAY_INFO(overlay_12, 0),
- OVERLAY_INFO(overlay_13, 0),
- OVERLAY_INFO(overlay_15, 0),
- OVERLAY_INFO(overlay_16, -EBUSY),
- OVERLAY_INFO(overlay_17, -EEXIST),
- OVERLAY_INFO(overlay_18, 0),
- OVERLAY_INFO(overlay_19, 0),
- OVERLAY_INFO(overlay_20, 0),
- OVERLAY_INFO(overlay_gpio_01, 0),
- OVERLAY_INFO(overlay_gpio_02a, 0),
- OVERLAY_INFO(overlay_gpio_02b, 0),
- OVERLAY_INFO(overlay_gpio_03, 0),
- OVERLAY_INFO(overlay_gpio_04a, 0),
- OVERLAY_INFO(overlay_gpio_04b, 0),
- OVERLAY_INFO(overlay_bad_add_dup_node, -EINVAL),
- OVERLAY_INFO(overlay_bad_add_dup_prop, -EINVAL),
- OVERLAY_INFO(overlay_bad_phandle, -EINVAL),
- OVERLAY_INFO(overlay_bad_symbol, -EINVAL),
+ OVERLAY_INFO(overlay_base, -9999, 0),
+ OVERLAY_INFO(overlay, 0, 0),
+ OVERLAY_INFO(overlay_0, 0, 0),
+ OVERLAY_INFO(overlay_1, 0, 0),
+ OVERLAY_INFO(overlay_2, 0, 0),
+ OVERLAY_INFO(overlay_3, 0, 0),
+ OVERLAY_INFO(overlay_4, 0, 0),
+ OVERLAY_INFO(overlay_5, 0, 0),
+ OVERLAY_INFO(overlay_6, 0, 0),
+ OVERLAY_INFO(overlay_7, 0, 0),
+ OVERLAY_INFO(overlay_8, 0, 0),
+ OVERLAY_INFO(overlay_9, 0, 0),
+ OVERLAY_INFO(overlay_10, 0, 0),
+ OVERLAY_INFO(overlay_11, 0, 0),
+ OVERLAY_INFO(overlay_12, 0, 0),
+ OVERLAY_INFO(overlay_13, 0, 0),
+ OVERLAY_INFO(overlay_15, 0, 0),
+ OVERLAY_INFO(overlay_16, -EBUSY, 0),
+ OVERLAY_INFO(overlay_17, -EEXIST, 0),
+ OVERLAY_INFO(overlay_18, 0, 0),
+ OVERLAY_INFO(overlay_19, 0, 0),
+ OVERLAY_INFO(overlay_20, 0, 0),
+ OVERLAY_INFO(overlay_gpio_01, 0, 0),
+ OVERLAY_INFO(overlay_gpio_02a, 0, 0),
+ OVERLAY_INFO(overlay_gpio_02b, 0, 0),
+ OVERLAY_INFO(overlay_gpio_03, 0, 0),
+ OVERLAY_INFO(overlay_gpio_04a, 0, 0),
+ OVERLAY_INFO(overlay_gpio_04b, 0, 0),
+ OVERLAY_INFO(overlay_bad_add_dup_node, -EINVAL, -ENODEV),
+ OVERLAY_INFO(overlay_bad_add_dup_prop, -EINVAL, -ENODEV),
+ OVERLAY_INFO(overlay_bad_phandle, -EINVAL, 0),
+ OVERLAY_INFO(overlay_bad_symbol, -EINVAL, -ENODEV),
/* end marker */
- {.dtbo_begin = NULL, .dtbo_end = NULL, .expected_result = 0, .name = NULL}
+ { }
};
static struct device_node *overlay_base_root;
@@ -3427,8 +3423,9 @@ void __init unittest_unflatten_overlay_base(void)
static int __init overlay_data_apply(const char *overlay_name, int *ovcs_id)
{
struct overlay_info *info;
+ int passed = 1;
int found = 0;
- int ret;
+ int ret, ret2;
u32 size;
for (info = overlays; info && info->name; info++) {
@@ -3455,11 +3452,24 @@ static int __init overlay_data_apply(const char *overlay_name, int *ovcs_id)
pr_debug("%s applied\n", overlay_name);
out:
- if (ret != info->expected_result)
+ if (ret != info->expected_result) {
pr_err("of_overlay_fdt_apply() expected %d, ret=%d, %s\n",
info->expected_result, ret, overlay_name);
+ passed = 0;
+ }
+
+ if (ret < 0) {
+ /* changeset may be partially applied */
+ ret2 = of_overlay_remove(&info->ovcs_id);
+ if (ret2 != info->expected_result_remove) {
+ pr_err("of_overlay_remove() expected %d, ret=%d, %s\n",
+ info->expected_result_remove, ret2,
+ overlay_name);
+ passed = 0;
+ }
+ }
- return (ret == info->expected_result);
+ return passed;
}
/*
@@ -3652,10 +3662,18 @@ static __init void of_unittest_overlay_high_level(void)
"OF: overlay: ERROR: multiple fragments add and/or delete node /testcase-data-2/substation@100/motor-1/controller");
EXPECT_BEGIN(KERN_ERR,
"OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/controller/name");
+ EXPECT_BEGIN(KERN_ERR,
+ "OF: changeset: remove_property failed @/testcase-data-2/substation@100/motor-1/controller/name");
+ EXPECT_BEGIN(KERN_ERR,
+ "OF: Error reverting changeset (-19)");
unittest(overlay_data_apply("overlay_bad_add_dup_node", NULL),
"Adding overlay 'overlay_bad_add_dup_node' failed\n");
+ EXPECT_END(KERN_ERR,
+ "OF: Error reverting changeset (-19)");
+ EXPECT_END(KERN_ERR,
+ "OF: changeset: remove_property failed @/testcase-data-2/substation@100/motor-1/controller/name");
EXPECT_END(KERN_ERR,
"OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/controller/name");
EXPECT_END(KERN_ERR,
@@ -3667,10 +3685,18 @@ static __init void of_unittest_overlay_high_level(void)
"OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/electric/rpm_avail");
EXPECT_BEGIN(KERN_ERR,
"OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/electric/name");
+ EXPECT_BEGIN(KERN_ERR,
+ "OF: changeset: remove_property failed @/testcase-data-2/substation@100/motor-1/electric/name");
+ EXPECT_BEGIN(KERN_ERR,
+ "OF: Error reverting changeset (-19)");
unittest(overlay_data_apply("overlay_bad_add_dup_prop", NULL),
"Adding overlay 'overlay_bad_add_dup_prop' failed\n");
+ EXPECT_END(KERN_ERR,
+ "OF: Error reverting changeset (-19)");
+ EXPECT_END(KERN_ERR,
+ "OF: changeset: remove_property failed @/testcase-data-2/substation@100/motor-1/electric/name");
EXPECT_END(KERN_ERR,
"OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/electric/name");
EXPECT_END(KERN_ERR,
@@ -3681,9 +3707,19 @@ static __init void of_unittest_overlay_high_level(void)
unittest(overlay_data_apply("overlay_bad_phandle", NULL),
"Adding overlay 'overlay_bad_phandle' failed\n");
+ EXPECT_BEGIN(KERN_ERR,
+ "OF: changeset: remove_property failed @/testcase-data-2/substation@100/hvac-medium-2/name");
+ EXPECT_BEGIN(KERN_ERR,
+ "OF: resolver: overlay phandle fixup failed: -22");
+
unittest(overlay_data_apply("overlay_bad_symbol", NULL),
"Adding overlay 'overlay_bad_symbol' failed\n");
+ EXPECT_END(KERN_ERR,
+ "OF: resolver: overlay phandle fixup failed: -22");
+ EXPECT_END(KERN_ERR,
+ "OF: changeset: remove_property failed @/testcase-data-2/substation@100/hvac-medium-2/name");
+
return;
err_unlock:
--
2.34.1
