Hi Andrej,
On Wed, 2023-07-19 at 13:43 +0200, Andrej Picej wrote:
> Due to the missing signal connection between i.MX6 WDOG_B pin and the
> PMICs external reset, the internal i.MX6 watchdog is not able to reset
> the phyFLEX SoM properly. Thus disable the internal i.MX6 watchdog to
> prevent unexpected PMIC settings after reset.
>
> NOTE: This patch should not be backported as it might break existing
> uses and fixes in bootloaders.
>
> Signed-off-by: Andrej Picej <andrej.picej@xxxxxxxxx>
Reviewed-by: Stefan Riedmüller <s.riedmueller@xxxxxxxxx>
> ---
> Changes in v2:
> - this is a substitute patch with a proper fix.
> ---
> arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi
> b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi
> index 80adb2a02cc9..65fd7b4a6f27 100644
> --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi
> +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi
> @@ -464,3 +464,11 @@ &usdhc3 {
> vmmc-supply = <&vdd_sd0_reg>;
> status = "disabled";
> };
> +
> +&wdog1 {
> + /*
> + * Rely on PMIC reboot handler. Internal i.MX6 watchdog, that is
> also
> + * used for reboot, does not reset all external PMIC voltages on
> reset.
> + */
> + status = "disabled";
> +};
