The RISC-V advanced interrupt architecture (AIA) specification defines advanced platform-level interrupt controller (APLIC) which has two modes of operation: 1) Direct mode and 2) MSI mode. (For more details, refer https://github.com/riscv/riscv-aia) In APLIC direct-mode, wired interrupts are forwared to CPUs (or HARTs) as a local external interrupt. We add a platform irqchip driver for the RISC-V APLIC direct-mode to support RISC-V platforms having only wired interrupts. Signed-off-by: Anup Patel <apatel@xxxxxxxxxxxxxxxx> --- drivers/irqchip/Kconfig | 5 + drivers/irqchip/Makefile | 1 + drivers/irqchip/irq-riscv-aplic-direct.c | 326 +++++++++++++++++++++++ drivers/irqchip/irq-riscv-aplic-main.c | 240 +++++++++++++++++ drivers/irqchip/irq-riscv-aplic-main.h | 45 ++++ include/linux/irqchip/riscv-aplic.h | 119 +++++++++ 6 files changed, 736 insertions(+) create mode 100644 drivers/irqchip/irq-riscv-aplic-direct.c create mode 100644 drivers/irqchip/irq-riscv-aplic-main.c create mode 100644 drivers/irqchip/irq-riscv-aplic-main.h create mode 100644 include/linux/irqchip/riscv-aplic.h diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig index d700980372ef..8875065d8af9 100644 --- a/drivers/irqchip/Kconfig +++ b/drivers/irqchip/Kconfig @@ -544,6 +544,11 @@ config SIFIVE_PLIC select IRQ_DOMAIN_HIERARCHY select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP +config RISCV_APLIC + bool + depends on RISCV + select IRQ_DOMAIN_HIERARCHY + config RISCV_IMSIC bool depends on RISCV diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile index abca445a3229..7f8289790ed8 100644 --- a/drivers/irqchip/Makefile +++ b/drivers/irqchip/Makefile @@ -95,6 +95,7 @@ obj-$(CONFIG_QCOM_MPM) += irq-qcom-mpm.o obj-$(CONFIG_CSKY_MPINTC) += irq-csky-mpintc.o obj-$(CONFIG_CSKY_APB_INTC) += irq-csky-apb-intc.o obj-$(CONFIG_RISCV_INTC) += irq-riscv-intc.o +obj-$(CONFIG_RISCV_APLIC) += irq-riscv-aplic-main.o irq-riscv-aplic-direct.o obj-$(CONFIG_RISCV_IMSIC) += irq-riscv-imsic-state.o irq-riscv-imsic-early.o irq-riscv-imsic-platform.o obj-$(CONFIG_SIFIVE_PLIC) += irq-sifive-plic.o obj-$(CONFIG_IMX_IRQSTEER) += irq-imx-irqsteer.o diff --git a/drivers/irqchip/irq-riscv-aplic-direct.c b/drivers/irqchip/irq-riscv-aplic-direct.c new file mode 100644 index 000000000000..e36d655a1490 --- /dev/null +++ b/drivers/irqchip/irq-riscv-aplic-direct.c @@ -0,0 +1,326 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2021 Western Digital Corporation or its affiliates. + * Copyright (C) 2022 Ventana Micro Systems Inc. + */ + +#include <linux/bitops.h> +#include <linux/cpu.h> +#include <linux/interrupt.h> +#include <linux/irqchip.h> +#include <linux/irqchip/chained_irq.h> +#include <linux/irqchip/riscv-aplic.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/printk.h> +#include <linux/smp.h> + +#include "irq-riscv-aplic-main.h" + +#define APLIC_DISABLE_IDELIVERY 0 +#define APLIC_ENABLE_IDELIVERY 1 +#define APLIC_DISABLE_ITHRESHOLD 1 +#define APLIC_ENABLE_ITHRESHOLD 0 + +struct aplic_direct { + struct aplic_priv priv; + struct irq_domain *irqdomain; + struct cpumask lmask; +}; + +struct aplic_idc { + unsigned int hart_index; + void __iomem *regs; + struct aplic_direct *direct; +}; + +static unsigned int aplic_direct_parent_irq; +static DEFINE_PER_CPU(struct aplic_idc, aplic_idcs); + +static void aplic_direct_irq_eoi(struct irq_data *d) +{ + /* + * The fasteoi_handler requires irq_eoi() callback hence + * provide a dummy handler. + */ +} + +#ifdef CONFIG_SMP +static int aplic_direct_set_affinity(struct irq_data *d, + const struct cpumask *mask_val, bool force) +{ + struct aplic_priv *priv = irq_data_get_irq_chip_data(d); + struct aplic_direct *direct = + container_of(priv, struct aplic_direct, priv); + struct aplic_idc *idc; + unsigned int cpu, val; + struct cpumask amask; + void __iomem *target; + + cpumask_and(&amask, &direct->lmask, mask_val); + + if (force) + cpu = cpumask_first(&amask); + else + cpu = cpumask_any_and(&amask, cpu_online_mask); + + if (cpu >= nr_cpu_ids) + return -EINVAL; + + idc = per_cpu_ptr(&aplic_idcs, cpu); + target = priv->regs + APLIC_TARGET_BASE; + target += (d->hwirq - 1) * sizeof(u32); + val = idc->hart_index & APLIC_TARGET_HART_IDX_MASK; + val <<= APLIC_TARGET_HART_IDX_SHIFT; + val |= APLIC_DEFAULT_PRIORITY; + writel(val, target); + + irq_data_update_effective_affinity(d, cpumask_of(cpu)); + + return IRQ_SET_MASK_OK_DONE; +} +#endif + +static struct irq_chip aplic_direct_chip = { + .name = "APLIC-DIRECT", + .irq_mask = aplic_irq_mask, + .irq_unmask = aplic_irq_unmask, + .irq_set_type = aplic_irq_set_type, + .irq_eoi = aplic_direct_irq_eoi, +#ifdef CONFIG_SMP + .irq_set_affinity = aplic_direct_set_affinity, +#endif + .flags = IRQCHIP_SET_TYPE_MASKED | + IRQCHIP_SKIP_SET_WAKE | + IRQCHIP_MASK_ON_SUSPEND, +}; + +static int aplic_direct_irqdomain_translate(struct irq_domain *d, + struct irq_fwspec *fwspec, + unsigned long *hwirq, + unsigned int *type) +{ + struct aplic_priv *priv = d->host_data; + + return aplic_irqdomain_translate(fwspec, priv->gsi_base, + hwirq, type); +} + +static int aplic_direct_irqdomain_alloc(struct irq_domain *domain, + unsigned int virq, unsigned int nr_irqs, + void *arg) +{ + int i, ret; + unsigned int type; + irq_hw_number_t hwirq; + struct irq_fwspec *fwspec = arg; + struct aplic_priv *priv = domain->host_data; + struct aplic_direct *direct = + container_of(priv, struct aplic_direct, priv); + + ret = aplic_irqdomain_translate(fwspec, priv->gsi_base, + &hwirq, &type); + if (ret) + return ret; + + for (i = 0; i < nr_irqs; i++) { + irq_domain_set_info(domain, virq + i, hwirq + i, + &aplic_direct_chip, priv, + handle_fasteoi_irq, NULL, NULL); + irq_set_affinity(virq + i, &direct->lmask); + /* See the reason described in aplic_msi_irqdomain_alloc() */ + irq_set_status_flags(virq + i, IRQ_DISABLE_UNLAZY); + } + + return 0; +} + +static const struct irq_domain_ops aplic_direct_irqdomain_ops = { + .translate = aplic_direct_irqdomain_translate, + .alloc = aplic_direct_irqdomain_alloc, + .free = irq_domain_free_irqs_top, +}; + +/* + * To handle an APLIC direct interrupts, we just read the CLAIMI register + * which will return highest priority pending interrupt and clear the + * pending bit of the interrupt. This process is repeated until CLAIMI + * register return zero value. + */ +static void aplic_direct_handle_irq(struct irq_desc *desc) +{ + struct aplic_idc *idc = this_cpu_ptr(&aplic_idcs); + struct irq_chip *chip = irq_desc_get_chip(desc); + struct irq_domain *irqdomain = idc->direct->irqdomain; + irq_hw_number_t hw_irq; + int irq; + + chained_irq_enter(chip, desc); + + while ((hw_irq = readl(idc->regs + APLIC_IDC_CLAIMI))) { + hw_irq = hw_irq >> APLIC_IDC_TOPI_ID_SHIFT; + irq = irq_find_mapping(irqdomain, hw_irq); + + if (unlikely(irq <= 0)) + dev_warn_ratelimited(idc->direct->priv.dev, + "hw_irq %lu mapping not found\n", + hw_irq); + else + generic_handle_irq(irq); + } + + chained_irq_exit(chip, desc); +} + +static void aplic_idc_set_delivery(struct aplic_idc *idc, bool en) +{ + u32 de = (en) ? APLIC_ENABLE_IDELIVERY : APLIC_DISABLE_IDELIVERY; + u32 th = (en) ? APLIC_ENABLE_ITHRESHOLD : APLIC_DISABLE_ITHRESHOLD; + + /* Priority must be less than threshold for interrupt triggering */ + writel(th, idc->regs + APLIC_IDC_ITHRESHOLD); + + /* Delivery must be set to 1 for interrupt triggering */ + writel(de, idc->regs + APLIC_IDC_IDELIVERY); +} + +static int aplic_direct_dying_cpu(unsigned int cpu) +{ + if (aplic_direct_parent_irq) + disable_percpu_irq(aplic_direct_parent_irq); + + return 0; +} + +static int aplic_direct_starting_cpu(unsigned int cpu) +{ + if (aplic_direct_parent_irq) + enable_percpu_irq(aplic_direct_parent_irq, + irq_get_trigger_type(aplic_direct_parent_irq)); + + return 0; +} + +int aplic_direct_setup(struct device *dev, void __iomem *regs) +{ + int i, j, rc, cpu, setup_count = 0; + struct fwnode_reference_args parent; + struct aplic_direct *direct; + struct aplic_priv *priv; + struct irq_domain *domain; + unsigned long hartid; + struct aplic_idc *idc; + u32 val; + + direct = kzalloc(sizeof(*direct), GFP_KERNEL); + if (!direct) + return -ENOMEM; + priv = &direct->priv; + + rc = aplic_setup_priv(priv, dev, regs); + if (rc) { + dev_err(dev, "failed to create APLIC context\n"); + kfree(direct); + return rc; + } + + /* Setup per-CPU IDC and target CPU mask */ + for (i = 0; i < priv->nr_idcs; i++) { + rc = fwnode_property_get_reference_args(dev->fwnode, + "interrupts-extended", "#interrupt-cells", + 0, i, &parent); + if (rc) { + dev_warn(dev, "parent irq for IDC%d not found\n", i); + continue; + } + + /* + * Skip interrupts other than external interrupts for + * current privilege level. + */ + if (parent.args[0] != RV_IRQ_EXT) + continue; + + rc = riscv_get_intc_hartid(parent.fwnode, &hartid); + if (rc) { + dev_warn(dev, "invalid hartid for IDC%d\n", i); + continue; + } + + cpu = riscv_hartid_to_cpuid(hartid); + if (cpu < 0) { + dev_warn(dev, "invalid cpuid for IDC%d\n", i); + continue; + } + + cpumask_set_cpu(cpu, &direct->lmask); + + idc = per_cpu_ptr(&aplic_idcs, cpu); + idc->hart_index = i; + idc->regs = priv->regs + APLIC_IDC_BASE + i * APLIC_IDC_SIZE; + idc->direct = direct; + + aplic_idc_set_delivery(idc, true); + + /* + * Boot cpu might not have APLIC hart_index = 0 so check + * and update target registers of all interrupts. + */ + if (cpu == smp_processor_id() && idc->hart_index) { + val = idc->hart_index & APLIC_TARGET_HART_IDX_MASK; + val <<= APLIC_TARGET_HART_IDX_SHIFT; + val |= APLIC_DEFAULT_PRIORITY; + for (j = 1; j <= priv->nr_irqs; j++) + writel(val, priv->regs + APLIC_TARGET_BASE + + (j - 1) * sizeof(u32)); + } + + setup_count++; + } + + /* Find parent domain and register chained handler */ + domain = irq_find_matching_fwnode(riscv_get_intc_hwnode(), + DOMAIN_BUS_ANY); + if (!aplic_direct_parent_irq && domain) { + aplic_direct_parent_irq = irq_create_mapping(domain, RV_IRQ_EXT); + if (aplic_direct_parent_irq) { + irq_set_chained_handler(aplic_direct_parent_irq, + aplic_direct_handle_irq); + + /* + * Setup CPUHP notifier to enable parent + * interrupt on all CPUs + */ + cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, + "irqchip/riscv/aplic:starting", + aplic_direct_starting_cpu, + aplic_direct_dying_cpu); + } + } + + /* Fail if we were not able to setup IDC for any CPU */ + if (!setup_count) { + kfree(direct); + return -ENODEV; + } + + /* Setup global config and interrupt delivery */ + aplic_init_hw_global(priv, false); + + /* Create irq domain instance for the APLIC */ + direct->irqdomain = irq_domain_create_linear(dev->fwnode, + priv->nr_irqs + 1, + &aplic_direct_irqdomain_ops, + priv); + if (!direct->irqdomain) { + dev_err(dev, "failed to create direct irq domain\n"); + kfree(direct); + return -ENOMEM; + } + + /* Advertise the interrupt controller */ + dev_info(dev, "%d interrupts directly connected to %d CPUs\n", + priv->nr_irqs, priv->nr_idcs); + + return 0; +} diff --git a/drivers/irqchip/irq-riscv-aplic-main.c b/drivers/irqchip/irq-riscv-aplic-main.c new file mode 100644 index 000000000000..d62a096774c4 --- /dev/null +++ b/drivers/irqchip/irq-riscv-aplic-main.c @@ -0,0 +1,240 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2021 Western Digital Corporation or its affiliates. + * Copyright (C) 2022 Ventana Micro Systems Inc. + */ + +#include <linux/printk.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/irqchip/riscv-aplic.h> + +#include "irq-riscv-aplic-main.h" + +void aplic_irq_unmask(struct irq_data *d) +{ + struct aplic_priv *priv = irq_data_get_irq_chip_data(d); + + writel(d->hwirq, priv->regs + APLIC_SETIENUM); +} + +void aplic_irq_mask(struct irq_data *d) +{ + struct aplic_priv *priv = irq_data_get_irq_chip_data(d); + + writel(d->hwirq, priv->regs + APLIC_CLRIENUM); +} + +int aplic_irq_set_type(struct irq_data *d, unsigned int type) +{ + u32 val = 0; + void __iomem *sourcecfg; + struct aplic_priv *priv = irq_data_get_irq_chip_data(d); + + switch (type) { + case IRQ_TYPE_NONE: + val = APLIC_SOURCECFG_SM_INACTIVE; + break; + case IRQ_TYPE_LEVEL_LOW: + val = APLIC_SOURCECFG_SM_LEVEL_LOW; + break; + case IRQ_TYPE_LEVEL_HIGH: + val = APLIC_SOURCECFG_SM_LEVEL_HIGH; + break; + case IRQ_TYPE_EDGE_FALLING: + val = APLIC_SOURCECFG_SM_EDGE_FALL; + break; + case IRQ_TYPE_EDGE_RISING: + val = APLIC_SOURCECFG_SM_EDGE_RISE; + break; + default: + return -EINVAL; + } + + sourcecfg = priv->regs + APLIC_SOURCECFG_BASE; + sourcecfg += (d->hwirq - 1) * sizeof(u32); + writel(val, sourcecfg); + + return 0; +} + +int aplic_irqdomain_translate(struct irq_fwspec *fwspec, u32 gsi_base, + unsigned long *hwirq, unsigned int *type) +{ + if (WARN_ON(fwspec->param_count < 2)) + return -EINVAL; + if (WARN_ON(!fwspec->param[0])) + return -EINVAL; + + /* For DT, gsi_base is always zero. */ + *hwirq = fwspec->param[0] - gsi_base; + *type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK; + + WARN_ON(*type == IRQ_TYPE_NONE); + + return 0; +} + +void aplic_init_hw_global(struct aplic_priv *priv, bool msi_mode) +{ + u32 val; +#ifdef CONFIG_RISCV_M_MODE + u32 valH; + + if (msi_mode) { + val = priv->msicfg.base_ppn; + valH = ((u64)priv->msicfg.base_ppn >> 32) & + APLIC_xMSICFGADDRH_BAPPN_MASK; + valH |= (priv->msicfg.lhxw & APLIC_xMSICFGADDRH_LHXW_MASK) + << APLIC_xMSICFGADDRH_LHXW_SHIFT; + valH |= (priv->msicfg.hhxw & APLIC_xMSICFGADDRH_HHXW_MASK) + << APLIC_xMSICFGADDRH_HHXW_SHIFT; + valH |= (priv->msicfg.lhxs & APLIC_xMSICFGADDRH_LHXS_MASK) + << APLIC_xMSICFGADDRH_LHXS_SHIFT; + valH |= (priv->msicfg.hhxs & APLIC_xMSICFGADDRH_HHXS_MASK) + << APLIC_xMSICFGADDRH_HHXS_SHIFT; + writel(val, priv->regs + APLIC_xMSICFGADDR); + writel(valH, priv->regs + APLIC_xMSICFGADDRH); + } +#endif + + /* Setup APLIC domaincfg register */ + val = readl(priv->regs + APLIC_DOMAINCFG); + val |= APLIC_DOMAINCFG_IE; + if (msi_mode) + val |= APLIC_DOMAINCFG_DM; + writel(val, priv->regs + APLIC_DOMAINCFG); + if (readl(priv->regs + APLIC_DOMAINCFG) != val) + dev_warn(priv->dev, "unable to write 0x%x in domaincfg\n", + val); +} + +static void aplic_init_hw_irqs(struct aplic_priv *priv) +{ + int i; + + /* Disable all interrupts */ + for (i = 0; i <= priv->nr_irqs; i += 32) + writel(-1U, priv->regs + APLIC_CLRIE_BASE + + (i / 32) * sizeof(u32)); + + /* Set interrupt type and default priority for all interrupts */ + for (i = 1; i <= priv->nr_irqs; i++) { + writel(0, priv->regs + APLIC_SOURCECFG_BASE + + (i - 1) * sizeof(u32)); + writel(APLIC_DEFAULT_PRIORITY, + priv->regs + APLIC_TARGET_BASE + + (i - 1) * sizeof(u32)); + } + + /* Clear APLIC domaincfg */ + writel(0, priv->regs + APLIC_DOMAINCFG); +} + +int aplic_setup_priv(struct aplic_priv *priv, struct device *dev, + void __iomem *regs) +{ + struct fwnode_reference_args parent; + int rc; + + /* Save device pointer and register base */ + priv->dev = dev; + priv->regs = regs; + + /* + * Find out GSI base number + * + * Note: DT does not define "riscv,gsi-base" property so GSI + * base is always zero for DT. + */ + rc = fwnode_property_read_u32_array(dev->fwnode, "riscv,gsi-base", + &priv->gsi_base, 1); + if (rc) + priv->gsi_base = 0; + + /* Find out number of interrupt sources */ + rc = fwnode_property_read_u32_array(dev->fwnode, "riscv,num-sources", + &priv->nr_irqs, 1); + if (rc) { + dev_err(dev, "failed to get number of interrupt sources\n"); + return rc; + } + + /* Setup initial state APLIC interrupts */ + aplic_init_hw_irqs(priv); + + /* + * Find out number of IDCs based on parent interrupts + * + * If "msi-parent" property is present then we ignore the + * APLIC IDCs which forces the APLIC driver to use MSI mode. + */ + if (!fwnode_property_present(dev->fwnode, "msi-parent")) { + while (!fwnode_property_get_reference_args(dev->fwnode, + "interrupts-extended", "#interrupt-cells", + 0, priv->nr_idcs, &parent)) + priv->nr_idcs++; + } + + return 0; +} + +static int aplic_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct resource *res; + void __iomem *regs; + int rc; + + /* Map the MMIO registers */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(dev, "failed to get MMIO resource\n"); + return -EINVAL; + } + regs = devm_ioremap(&pdev->dev, res->start, resource_size(res)); + if (!regs) { + dev_err(dev, "failed map MMIO registers\n"); + return -ENOMEM; + } + + /* + * If msi-parent property is present then setup APLIC MSI mode + * otherwise setup APLIC direct mode. + */ + if (fwnode_property_present(dev->fwnode, "msi-parent")) + rc = -ENODEV; + else + rc = aplic_direct_setup(dev, regs); + if (rc) { + dev_err(dev, "failed setup APLIC in %s mode\n", + fwnode_property_present(dev->fwnode, "msi-parent") ? + "MSI" : "direct"); + return rc; + } + + return 0; +} + +static const struct of_device_id aplic_match[] = { + { .compatible = "riscv,aplic" }, + {} +}; + +static struct platform_driver aplic_driver = { + .driver = { + .name = "riscv-aplic", + .of_match_table = aplic_match, + }, + .probe = aplic_probe, +}; + +static int __init aplic_init(void) +{ + /* + * Register APLIC driver as early as possible so that APLIC + * platform device is probed as soon as it is created. + */ + return platform_driver_register(&aplic_driver); +} +core_initcall(aplic_init); diff --git a/drivers/irqchip/irq-riscv-aplic-main.h b/drivers/irqchip/irq-riscv-aplic-main.h new file mode 100644 index 000000000000..474a04229334 --- /dev/null +++ b/drivers/irqchip/irq-riscv-aplic-main.h @@ -0,0 +1,45 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2021 Western Digital Corporation or its affiliates. + * Copyright (C) 2022 Ventana Micro Systems Inc. + */ + +#ifndef _IRQ_RISCV_APLIC_MAIN_H +#define _IRQ_RISCV_APLIC_MAIN_H + +#include <linux/device.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/irqdomain.h> +#include <linux/fwnode.h> + +#define APLIC_DEFAULT_PRIORITY 1 + +struct aplic_msicfg { + phys_addr_t base_ppn; + u32 hhxs; + u32 hhxw; + u32 lhxs; + u32 lhxw; +}; + +struct aplic_priv { + struct device *dev; + u32 gsi_base; + u32 nr_irqs; + u32 nr_idcs; + void __iomem *regs; + struct aplic_msicfg msicfg; +}; + +void aplic_irq_unmask(struct irq_data *d); +void aplic_irq_mask(struct irq_data *d); +int aplic_irq_set_type(struct irq_data *d, unsigned int type); +int aplic_irqdomain_translate(struct irq_fwspec *fwspec, u32 gsi_base, + unsigned long *hwirq, unsigned int *type); +void aplic_init_hw_global(struct aplic_priv *priv, bool msi_mode); +int aplic_setup_priv(struct aplic_priv *priv, struct device *dev, + void __iomem *regs); +int aplic_direct_setup(struct device *dev, void __iomem *regs); + +#endif diff --git a/include/linux/irqchip/riscv-aplic.h b/include/linux/irqchip/riscv-aplic.h new file mode 100644 index 000000000000..97e198ea0109 --- /dev/null +++ b/include/linux/irqchip/riscv-aplic.h @@ -0,0 +1,119 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2021 Western Digital Corporation or its affiliates. + * Copyright (C) 2022 Ventana Micro Systems Inc. + */ +#ifndef __LINUX_IRQCHIP_RISCV_APLIC_H +#define __LINUX_IRQCHIP_RISCV_APLIC_H + +#include <linux/bitops.h> + +#define APLIC_MAX_IDC BIT(14) +#define APLIC_MAX_SOURCE 1024 + +#define APLIC_DOMAINCFG 0x0000 +#define APLIC_DOMAINCFG_RDONLY 0x80000000 +#define APLIC_DOMAINCFG_IE BIT(8) +#define APLIC_DOMAINCFG_DM BIT(2) +#define APLIC_DOMAINCFG_BE BIT(0) + +#define APLIC_SOURCECFG_BASE 0x0004 +#define APLIC_SOURCECFG_D BIT(10) +#define APLIC_SOURCECFG_CHILDIDX_MASK 0x000003ff +#define APLIC_SOURCECFG_SM_MASK 0x00000007 +#define APLIC_SOURCECFG_SM_INACTIVE 0x0 +#define APLIC_SOURCECFG_SM_DETACH 0x1 +#define APLIC_SOURCECFG_SM_EDGE_RISE 0x4 +#define APLIC_SOURCECFG_SM_EDGE_FALL 0x5 +#define APLIC_SOURCECFG_SM_LEVEL_HIGH 0x6 +#define APLIC_SOURCECFG_SM_LEVEL_LOW 0x7 + +#define APLIC_MMSICFGADDR 0x1bc0 +#define APLIC_MMSICFGADDRH 0x1bc4 +#define APLIC_SMSICFGADDR 0x1bc8 +#define APLIC_SMSICFGADDRH 0x1bcc + +#ifdef CONFIG_RISCV_M_MODE +#define APLIC_xMSICFGADDR APLIC_MMSICFGADDR +#define APLIC_xMSICFGADDRH APLIC_MMSICFGADDRH +#else +#define APLIC_xMSICFGADDR APLIC_SMSICFGADDR +#define APLIC_xMSICFGADDRH APLIC_SMSICFGADDRH +#endif + +#define APLIC_xMSICFGADDRH_L BIT(31) +#define APLIC_xMSICFGADDRH_HHXS_MASK 0x1f +#define APLIC_xMSICFGADDRH_HHXS_SHIFT 24 +#define APLIC_xMSICFGADDRH_LHXS_MASK 0x7 +#define APLIC_xMSICFGADDRH_LHXS_SHIFT 20 +#define APLIC_xMSICFGADDRH_HHXW_MASK 0x7 +#define APLIC_xMSICFGADDRH_HHXW_SHIFT 16 +#define APLIC_xMSICFGADDRH_LHXW_MASK 0xf +#define APLIC_xMSICFGADDRH_LHXW_SHIFT 12 +#define APLIC_xMSICFGADDRH_BAPPN_MASK 0xfff + +#define APLIC_xMSICFGADDR_PPN_SHIFT 12 + +#define APLIC_xMSICFGADDR_PPN_HART(__lhxs) \ + (BIT(__lhxs) - 1) + +#define APLIC_xMSICFGADDR_PPN_LHX_MASK(__lhxw) \ + (BIT(__lhxw) - 1) +#define APLIC_xMSICFGADDR_PPN_LHX_SHIFT(__lhxs) \ + ((__lhxs)) +#define APLIC_xMSICFGADDR_PPN_LHX(__lhxw, __lhxs) \ + (APLIC_xMSICFGADDR_PPN_LHX_MASK(__lhxw) << \ + APLIC_xMSICFGADDR_PPN_LHX_SHIFT(__lhxs)) + +#define APLIC_xMSICFGADDR_PPN_HHX_MASK(__hhxw) \ + (BIT(__hhxw) - 1) +#define APLIC_xMSICFGADDR_PPN_HHX_SHIFT(__hhxs) \ + ((__hhxs) + APLIC_xMSICFGADDR_PPN_SHIFT) +#define APLIC_xMSICFGADDR_PPN_HHX(__hhxw, __hhxs) \ + (APLIC_xMSICFGADDR_PPN_HHX_MASK(__hhxw) << \ + APLIC_xMSICFGADDR_PPN_HHX_SHIFT(__hhxs)) + +#define APLIC_IRQBITS_PER_REG 32 + +#define APLIC_SETIP_BASE 0x1c00 +#define APLIC_SETIPNUM 0x1cdc + +#define APLIC_CLRIP_BASE 0x1d00 +#define APLIC_CLRIPNUM 0x1ddc + +#define APLIC_SETIE_BASE 0x1e00 +#define APLIC_SETIENUM 0x1edc + +#define APLIC_CLRIE_BASE 0x1f00 +#define APLIC_CLRIENUM 0x1fdc + +#define APLIC_SETIPNUM_LE 0x2000 +#define APLIC_SETIPNUM_BE 0x2004 + +#define APLIC_GENMSI 0x3000 + +#define APLIC_TARGET_BASE 0x3004 +#define APLIC_TARGET_HART_IDX_SHIFT 18 +#define APLIC_TARGET_HART_IDX_MASK 0x3fff +#define APLIC_TARGET_GUEST_IDX_SHIFT 12 +#define APLIC_TARGET_GUEST_IDX_MASK 0x3f +#define APLIC_TARGET_IPRIO_MASK 0xff +#define APLIC_TARGET_EIID_MASK 0x7ff + +#define APLIC_IDC_BASE 0x4000 +#define APLIC_IDC_SIZE 32 + +#define APLIC_IDC_IDELIVERY 0x00 + +#define APLIC_IDC_IFORCE 0x04 + +#define APLIC_IDC_ITHRESHOLD 0x08 + +#define APLIC_IDC_TOPI 0x18 +#define APLIC_IDC_TOPI_ID_SHIFT 16 +#define APLIC_IDC_TOPI_ID_MASK 0x3ff +#define APLIC_IDC_TOPI_PRIO_MASK 0xff + +#define APLIC_IDC_CLAIMI 0x1c + +#endif -- 2.34.1
