On 7/10/23 3:13 PM, Siddharth Vadapalli wrote: > From: Kishon Vijay Abraham I <kishon@xxxxxx> > > TI's J721S2 SoC has a MAIN CPSW2G instance of the CPSW Ethernet Switch. > Add devicetree node for it. > > Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx> > Signed-off-by: Siddharth Vadapalli <s-vadapalli@xxxxxx> > --- > arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 69 ++++++++++++++++++++++ > 1 file changed, 69 insertions(+) > > diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi > index ed79ab3a3271..4d0d27e7ca1b 100644 > --- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi > +++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi > @@ -51,6 +51,12 @@ usb_serdes_mux: mux-controller@0 { > mux-reg-masks = <0x0 0x8000000>; /* USB0 to SERDES0 lane 1/3 mux */ > }; > > + phy_gmii_sel_cpsw: phy@34 { > + compatible = "ti,am654-phy-gmii-sel"; > + reg = <0x34 0x4>; > + #phy-cells = <1>; > + }; > + > serdes_ln_ctrl: mux-controller@80 { > compatible = "mmio-mux"; > reg = <0x80 0x10>; > @@ -1039,6 +1045,69 @@ cpts@310d0000 { > }; > }; > > + main_cpsw: ethernet@c200000 { > + compatible = "ti,j721e-cpsw-nuss"; > + reg = <0x00 0xc200000 0x00 0x200000>; > + reg-names = "cpsw_nuss"; > + ranges = <0x0 0x0 0x0 0xc200000 0x0 0x200000>; > + #address-cells = <2>; > + #size-cells = <2>; > + dma-coherent; > + clocks = <&k3_clks 28 28>; > + clock-names = "fck"; > + power-domains = <&k3_pds 28 TI_SCI_PD_EXCLUSIVE>; > + > + dmas = <&main_udmap 0xc640>, > + <&main_udmap 0xc641>, > + <&main_udmap 0xc642>, > + <&main_udmap 0xc643>, > + <&main_udmap 0xc644>, > + <&main_udmap 0xc645>, > + <&main_udmap 0xc646>, > + <&main_udmap 0xc647>, > + <&main_udmap 0x4640>; > + dma-names = "tx0", "tx1", "tx2", "tx3", > + "tx4", "tx5", "tx6", "tx7", > + "rx"; > + > + status = "disabled"; > + > + ethernet-ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + main_cpsw_port1: port@1 { > + reg = <1>; > + ti,mac-only; > + label = "port1"; > + phys = <&phy_gmii_sel_cpsw 1>; > + status = "disabled"; > + }; > + }; > + > + main_cpsw_mdio: mdio@f00 { > + compatible = "ti,cpsw-mdio","ti,davinci_mdio"; > + reg = <0x00 0xf00 0x00 0x100>; > + #address-cells = <1>; > + #size-cells = <0>; > + clocks = <&k3_clks 28 28>; > + clock-names = "fck"; > + bus_freq = <1000000>; > + status = "disabled"; > + }; > + > + cpts@3d000 { > + compatible = "ti,am65-cpts"; > + reg = <0x00 0x3d000 0x00 0x400>; > + clocks = <&k3_clks 28 3>; > + clock-names = "cpts"; > + interrupts-extended = <&gic500 GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "cpts"; > + ti,cpts-ext-ts-inputs = <4>; > + ti,cpts-periodic-outputs = <2>; > + }; > + }; > + > usbss0: cdns-usb@4104000 { > compatible = "ti,j721e-usb"; > reg = <0x00 0x04104000 0x00 0x100>; Reviewed-by: Ravi Gunasekaran <r-gunasekaran@xxxxxx> -- Regards, Ravi