From: Zelong Dong <zelong.dong@xxxxxxxxxxx>
Add the reset controller device of Meson-C3 SoC family
Signed-off-by: Zelong Dong <zelong.dong@xxxxxxxxxxx>
---
arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
index 60ad4f3eef9d..ef81dd8338e0 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
@@ -6,6 +6,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/reset/amlogic,meson-c3-reset.h>
/ {
cpus {
@@ -72,6 +73,12 @@ apb4: bus@fe000000 {
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
+ reset: reset-controller@2000 {
+ compatible = "amlogic,meson-c3-reset";
+ reg = <0x0 0x2000 0x0 0x98>;
+ #reset-cells = <1>;
+ };
+
uart_b: serial@7a000 {
compatible = "amlogic,meson-s4-uart",
"amlogic,meson-ao-uart";
--
2.35.1
