Re: [PATCH 4/6] clk: qcom: Add NSS clock Controller driver for IPQ9574

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 7/11/2023 4:20 PM, Dmitry Baryshkov wrote:
On 11/07/2023 12:35, Devi Priya wrote:
Add Networking Sub System Clock Controller(NSSCC) driver for ipq9574 based
devices.

Signed-off-by: Devi Priya <quic_devipriy@xxxxxxxxxxx>
---
  drivers/clk/qcom/Kconfig         |    6 +
  drivers/clk/qcom/Makefile        |    1 +
  drivers/clk/qcom/nsscc-ipq9574.c | 3080 ++++++++++++++++++++++++++++++
  3 files changed, 3087 insertions(+)
  create mode 100644 drivers/clk/qcom/nsscc-ipq9574.c

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 263e55d75e3f..5556063d204f 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -195,6 +195,12 @@ config IPQ_GCC_9574
        i2c, USB, SD/eMMC, etc. Select this for the root clock
        of ipq9574.
+config IPQ_NSSCC_9574
+    tristate "IPQ9574 NSS Clock Controller"
+    depends on IPQ_GCC_9574
+    help
+      Support for NSS clock controller on ipq9574 devices.
+
  config MSM_GCC_8660
      tristate "MSM8660 Global Clock Controller"
      depends on ARM || COMPILE_TEST
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index e6e294274c35..8ba882186bff 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_IPQ_GCC_6018) += gcc-ipq6018.o
  obj-$(CONFIG_IPQ_GCC_806X) += gcc-ipq806x.o
  obj-$(CONFIG_IPQ_GCC_8074) += gcc-ipq8074.o
  obj-$(CONFIG_IPQ_GCC_9574) += gcc-ipq9574.o
+obj-$(CONFIG_IPQ_NSSCC_9574)    += nsscc-ipq9574.o
  obj-$(CONFIG_IPQ_LCC_806X) += lcc-ipq806x.o
  obj-$(CONFIG_MDM_GCC_9607) += gcc-mdm9607.o
  obj-$(CONFIG_MDM_GCC_9615) += gcc-mdm9615.o
diff --git a/drivers/clk/qcom/nsscc-ipq9574.c b/drivers/clk/qcom/nsscc-ipq9574.c
new file mode 100644
index 000000000000..b6bed0d24059
--- /dev/null
+++ b/drivers/clk/qcom/nsscc-ipq9574.c
@@ -0,0 +1,3080 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,ipq9574-nsscc.h>
+#include <dt-bindings/reset/qcom,ipq9574-nsscc.h>
+
+#include "clk-alpha-pll.h"
+#include "clk-branch.h"
+#include "clk-pll.h"
+#include "clk-rcg.h"
+#include "clk-regmap.h"
+#include "clk-regmap-divider.h"
+#include "clk-regmap-mux.h"
+#include "common.h"
+#include "reset.h"
+
+/* Need to match the order of clocks in DT binding */
+enum {
+    DT_BIAS_PLL_CC_CLK,
+    DT_BIAS_PLL_NSS_NOC_CLK,
+    DT_BIAS_PLL_UBI_NC_CLK,
+    DT_GCC_GPLL0_OUT_AUX,
+    DT_UNIPHY0_GCC_RX_CLK,
+    DT_UNIPHY0_GCC_TX_CLK,
+    DT_UNIPHY1_GCC_RX_CLK,
+    DT_UNIPHY1_GCC_TX_CLK,
+    DT_UNIPHY2_GCC_RX_CLK,
+    DT_UNIPHY2_GCC_TX_CLK,
+    DT_XO,
+};
+
+enum {
+    P_BIAS_PLL_CC_CLK,
+    P_BIAS_PLL_NSS_NOC_CLK,
+    P_BIAS_PLL_UBI_NC_CLK,
+    P_GCC_GPLL0_OUT_AUX,
+    P_UBI32_PLL_OUT_MAIN,
+    P_UNIPHY0_GCC_RX_CLK,
+    P_UNIPHY0_GCC_TX_CLK,
+    P_UNIPHY1_GCC_RX_CLK,
+    P_UNIPHY1_GCC_TX_CLK,
+    P_UNIPHY2_GCC_RX_CLK,
+    P_UNIPHY2_GCC_TX_CLK,
+    P_XO,
+};
+
+static const struct alpha_pll_config ubi32_pll_config = {
+    .l = 0x3e,
+    .alpha = 0x6666,
+    .config_ctl_val = 0x200d4aa8,
+    .config_ctl_hi_val = 0x3c,
+    .main_output_mask = BIT(0),
+    .aux_output_mask = BIT(1),
+    .pre_div_val = 0x0,
+    .pre_div_mask = BIT(12),
+    .post_div_val = 0x0,
+    .post_div_mask = GENMASK(9, 8),
+    .alpha_en_mask = BIT(24),
+    .test_ctl_val = 0x1c0000c0,
+    .test_ctl_hi_val = 0x4000,
+};
+
+static struct clk_alpha_pll ubi32_pll_main = {
+    .offset = 0x28000,
+    .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_NSS_HUAYRA],
+    .flags = SUPPORTS_DYNAMIC_UPDATE,
+    .clkr = {
+        .hw.init = &(const struct clk_init_data) {
+            .name = "ubi32_pll_main",
+            .parent_data = &(const struct clk_parent_data) {
+                .index = DT_XO,
+            },
+            .num_parents = 1,
+            .ops = &clk_alpha_pll_huayra_ops,
+        },
+    },
+};
+
+static struct clk_alpha_pll_postdiv ubi32_pll = {
+    .offset = 0x28000,
+    .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_NSS_HUAYRA],
+    .width = 2,
+    .clkr.hw.init = &(const struct clk_init_data) {
+        .name = "ubi32_pll",
+        .parent_hws = (const struct clk_hw *[]) {
+            &ubi32_pll_main.clkr.hw
+        },
+        .num_parents = 1,
+        .ops = &clk_alpha_pll_postdiv_ro_ops,
+        .flags = CLK_SET_RATE_PARENT,
+    },
+};
+

[skipped the rest, LGTM]

  +
+static int nss_cc_ipq9574_probe(struct platform_device *pdev)
+{
+    struct regmap *regmap;
+    struct qcom_cc_desc nsscc_ipq9574_desc = nss_cc_ipq9574_desc;
+
+    regmap = qcom_cc_map(pdev, &nsscc_ipq9574_desc);
+    if (IS_ERR(regmap))
+        return PTR_ERR(regmap);
+
+    /* SW Workaround for UBI Huayra PLL */
+    regmap_update_bits(regmap, 0x2800C, BIT(26), BIT(26));

Can we directly set the correct value via ubi32_pll_config.test_ctl_val ?

Sure, will check and update in V2

+
+    clk_alpha_pll_configure(&ubi32_pll_main, regmap, &ubi32_pll_config);
+
+    return qcom_cc_really_probe(pdev, &nsscc_ipq9574_desc, regmap);
+}
+
+static struct platform_driver nss_cc_ipq9574_driver = {
+    .probe = nss_cc_ipq9574_probe,
+    .driver = {
+        .name = "qcom,nsscc-ipq9574",
+        .of_match_table = nss_cc_ipq9574_match_table,
+    },
+};
+
+static int __init nss_cc_ipq9574_init(void)
+{
+    return platform_driver_register(&nss_cc_ipq9574_driver);
+}
+subsys_initcall(nss_cc_ipq9574_init);
+
+static void __exit nss_cc_ipq9574_exit(void)
+{
+    platform_driver_unregister(&nss_cc_ipq9574_driver);
+}
+module_exit(nss_cc_ipq9574_exit);

module_platform_driver ?
okay

Thanks,
Devi Priya

+
+MODULE_DESCRIPTION("QTI NSS_CC IPQ9574 Driver");
+MODULE_LICENSE("GPL");




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux