On Sun, Jun 25, 2023 at 08:42:36PM +0800, Peng Fan (OSS) wrote:
> From: Han Xu <han.xu@xxxxxxx>
>
> Add spi-nor support.
> - 8 bit mode for RX/TX.
> - Set the clock rate to 200MHz.
> - add default/sleep pinctrl.
>
> Co-developed-by: Haibo Chen <haibo.chen@xxxxxxx>
> Signed-off-by: Haibo Chen <haibo.chen@xxxxxxx>
> Signed-off-by: Han Xu <han.xu@xxxxxxx>
> Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
> ---
> arch/arm64/boot/dts/freescale/imx8ulp-evk.dts | 34 +++++++++++++++++++
> 1 file changed, 34 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
> index d66e31cf83fe..e459dc35e469 100644
> --- a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
> @@ -95,6 +95,23 @@ &cm33 {
> status = "okay";
> };
>
> +&flexspi2 {
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&pinctrl_flexspi2_ptd>;
> + pinctrl-1 = <&pinctrl_flexspi2_ptd>;
> + status = "okay";
> +
> + mx25uw51345gxdi00: flash@0 {
> + reg = <0>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "jedec,spi-nor";
We usually start the property list with 'compatible'.
Shawn
> + spi-max-frequency = <200000000>;
> + spi-tx-bus-width = <8>;
> + spi-rx-bus-width = <8>;
> + };
> +};
> +
> &lpuart5 {
> /* console */
> pinctrl-names = "default", "sleep";
> @@ -159,6 +176,23 @@ MX8ULP_PAD_PTF10__ENET0_1588_CLKIN 0x43
> >;
> };
>
> + pinctrl_flexspi2_ptd: flexspi2ptdgrp {
> + fsl,pins = <
> +
> + MX8ULP_PAD_PTD12__FLEXSPI2_A_SS0_B 0x42
> + MX8ULP_PAD_PTD13__FLEXSPI2_A_SCLK 0x42
> + MX8ULP_PAD_PTD14__FLEXSPI2_A_DATA3 0x42
> + MX8ULP_PAD_PTD15__FLEXSPI2_A_DATA2 0x42
> + MX8ULP_PAD_PTD16__FLEXSPI2_A_DATA1 0x42
> + MX8ULP_PAD_PTD17__FLEXSPI2_A_DATA0 0x42
> + MX8ULP_PAD_PTD18__FLEXSPI2_A_DQS 0x42
> + MX8ULP_PAD_PTD19__FLEXSPI2_A_DATA7 0x42
> + MX8ULP_PAD_PTD20__FLEXSPI2_A_DATA6 0x42
> + MX8ULP_PAD_PTD21__FLEXSPI2_A_DATA5 0x42
> + MX8ULP_PAD_PTD22__FLEXSPI2_A_DATA4 0x42
> + >;
> + };
> +
> pinctrl_lpuart5: lpuart5grp {
> fsl,pins = <
> MX8ULP_PAD_PTF14__LPUART5_TX 0x3
> --
> 2.37.1
>
