[PATCH 2/3] ARM: tegra: Remove reset-names for UART devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Thierry Reding <treding@xxxxxxxxxx>

The UART devices found on Tegra chips have a single reset connected to
them, so a reset-names property isn't needed. In fact, the device tree
bindings don't allow this property, so remove them to allow the nodes
to be properly validated.

Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
---
 arch/arm/boot/dts/nvidia/tegra114.dtsi | 4 ----
 arch/arm/boot/dts/nvidia/tegra124.dtsi | 4 ----
 arch/arm/boot/dts/nvidia/tegra20.dtsi  | 5 -----
 arch/arm/boot/dts/nvidia/tegra30.dtsi  | 5 -----
 4 files changed, 18 deletions(-)

diff --git a/arch/arm/boot/dts/nvidia/tegra114.dtsi b/arch/arm/boot/dts/nvidia/tegra114.dtsi
index 09996acad639..86f14e2fd29f 100644
--- a/arch/arm/boot/dts/nvidia/tegra114.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra114.dtsi
@@ -315,7 +315,6 @@ uarta: serial@70006000 {
 		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA114_CLK_UARTA>;
 		resets = <&tegra_car 6>;
-		reset-names = "serial";
 		dmas = <&apbdma 8>, <&apbdma 8>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -328,7 +327,6 @@ uartb: serial@70006040 {
 		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA114_CLK_UARTB>;
 		resets = <&tegra_car 7>;
-		reset-names = "serial";
 		dmas = <&apbdma 9>, <&apbdma 9>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -341,7 +339,6 @@ uartc: serial@70006200 {
 		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA114_CLK_UARTC>;
 		resets = <&tegra_car 55>;
-		reset-names = "serial";
 		dmas = <&apbdma 10>, <&apbdma 10>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -354,7 +351,6 @@ uartd: serial@70006300 {
 		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA114_CLK_UARTD>;
 		resets = <&tegra_car 65>;
-		reset-names = "serial";
 		dmas = <&apbdma 19>, <&apbdma 19>;
 		dma-names = "rx", "tx";
 		status = "disabled";
diff --git a/arch/arm/boot/dts/nvidia/tegra124.dtsi b/arch/arm/boot/dts/nvidia/tegra124.dtsi
index 840b498611d3..035deaf17c6e 100644
--- a/arch/arm/boot/dts/nvidia/tegra124.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra124.dtsi
@@ -380,7 +380,6 @@ uarta: serial@70006000 {
 		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_UARTA>;
 		resets = <&tegra_car 6>;
-		reset-names = "serial";
 		dmas = <&apbdma 8>, <&apbdma 8>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -393,7 +392,6 @@ uartb: serial@70006040 {
 		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_UARTB>;
 		resets = <&tegra_car 7>;
-		reset-names = "serial";
 		dmas = <&apbdma 9>, <&apbdma 9>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -406,7 +404,6 @@ uartc: serial@70006200 {
 		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_UARTC>;
 		resets = <&tegra_car 55>;
-		reset-names = "serial";
 		dmas = <&apbdma 10>, <&apbdma 10>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -419,7 +416,6 @@ uartd: serial@70006300 {
 		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_UARTD>;
 		resets = <&tegra_car 65>;
-		reset-names = "serial";
 		dmas = <&apbdma 19>, <&apbdma 19>;
 		dma-names = "rx", "tx";
 		status = "disabled";
diff --git a/arch/arm/boot/dts/nvidia/tegra20.dtsi b/arch/arm/boot/dts/nvidia/tegra20.dtsi
index 4177d04265d8..8da75ccc4402 100644
--- a/arch/arm/boot/dts/nvidia/tegra20.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra20.dtsi
@@ -442,7 +442,6 @@ uarta: serial@70006000 {
 		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA20_CLK_UARTA>;
 		resets = <&tegra_car 6>;
-		reset-names = "serial";
 		dmas = <&apbdma 8>, <&apbdma 8>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -455,7 +454,6 @@ uartb: serial@70006040 {
 		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA20_CLK_UARTB>;
 		resets = <&tegra_car 7>;
-		reset-names = "serial";
 		dmas = <&apbdma 9>, <&apbdma 9>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -468,7 +466,6 @@ uartc: serial@70006200 {
 		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA20_CLK_UARTC>;
 		resets = <&tegra_car 55>;
-		reset-names = "serial";
 		dmas = <&apbdma 10>, <&apbdma 10>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -481,7 +478,6 @@ uartd: serial@70006300 {
 		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA20_CLK_UARTD>;
 		resets = <&tegra_car 65>;
-		reset-names = "serial";
 		dmas = <&apbdma 19>, <&apbdma 19>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -494,7 +490,6 @@ uarte: serial@70006400 {
 		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA20_CLK_UARTE>;
 		resets = <&tegra_car 66>;
-		reset-names = "serial";
 		dmas = <&apbdma 20>, <&apbdma 20>;
 		dma-names = "rx", "tx";
 		status = "disabled";
diff --git a/arch/arm/boot/dts/nvidia/tegra30.dtsi b/arch/arm/boot/dts/nvidia/tegra30.dtsi
index 9cba67b54111..f866fa7b55a5 100644
--- a/arch/arm/boot/dts/nvidia/tegra30.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra30.dtsi
@@ -563,7 +563,6 @@ uarta: serial@70006000 {
 		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA30_CLK_UARTA>;
 		resets = <&tegra_car 6>;
-		reset-names = "serial";
 		dmas = <&apbdma 8>, <&apbdma 8>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -576,7 +575,6 @@ uartb: serial@70006040 {
 		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA30_CLK_UARTB>;
 		resets = <&tegra_car 7>;
-		reset-names = "serial";
 		dmas = <&apbdma 9>, <&apbdma 9>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -589,7 +587,6 @@ uartc: serial@70006200 {
 		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA30_CLK_UARTC>;
 		resets = <&tegra_car 55>;
-		reset-names = "serial";
 		dmas = <&apbdma 10>, <&apbdma 10>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -602,7 +599,6 @@ uartd: serial@70006300 {
 		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA30_CLK_UARTD>;
 		resets = <&tegra_car 65>;
-		reset-names = "serial";
 		dmas = <&apbdma 19>, <&apbdma 19>;
 		dma-names = "rx", "tx";
 		status = "disabled";
@@ -615,7 +611,6 @@ uarte: serial@70006400 {
 		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA30_CLK_UARTE>;
 		resets = <&tegra_car 66>;
-		reset-names = "serial";
 		dmas = <&apbdma 20>, <&apbdma 20>;
 		dma-names = "rx", "tx";
 		status = "disabled";
-- 
2.41.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux