Document the PCIe device tree binding for Broadcom iProc family of SoCs Signed-off-by: Ray Jui <rjui@xxxxxxxxxxxx> Reviewed-by: Scott Branden <sbranden@xxxxxxxxxxxx> --- .../devicetree/bindings/pci/brcm,iproc-pcie.txt | 62 ++++++++++++++++++++ 1 file changed, 62 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt diff --git a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt new file mode 100644 index 0000000..2467628 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt @@ -0,0 +1,62 @@ +* Broadcom iProc PCIe controller + +Required properties: +- compatible: Must be "brcm,iproc-pcie" +- reg: base address and length of the PCIe controller and the MDIO interface + that controls the PCIe PHY +- interrupts: interrupt IDs +- bus-range: PCI bus numbers covered +- #address-cells: set to <3> +- #size-cells: set to <2> +- device_type: set to "pci" +- ranges: ranges for the PCI memory and I/O regions +- phy-addr: MDC/MDIO adddress of the PCIe PHY +- have-msi-inten-reg: Required for legacy iProc PCIe controllers that need the + MSI interrupt enable register to be set explicitly + +The Broadcom iProc PCie driver adapts the multi-domain structure, i.e., each +interface has its own domain and therefore has its own device node +Example: + +SoC specific DT Entry: + + pcie0: pcie@18012000 { + compatible = "brcm,iproc-pcie"; + reg = <0x18012000 0x1000>, + <0x18002000 0x1000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>, + <GIC_SPI 97 IRQ_TYPE_NONE>, + <GIC_SPI 98 IRQ_TYPE_NONE>, + <GIC_SPI 99 IRQ_TYPE_NONE>, + <GIC_SPI 100 IRQ_TYPE_NONE>, + <GIC_SPI 101 IRQ_TYPE_NONE>; + bus-range = <0x00 0xFF>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0 0x28000000 0 0x00010000 /* downstream I/O */ + 0x82000000 0 0x20000000 0x20000000 0 0x04000000>; /* non-prefetchable memory */ + phy-addr = <5>; + }; + + pcie1: pcie@18013000 { + compatible = "brcm,iproc-pcie"; + reg = <0x18013000 0x1000>, + <0x18002000 0x1000>; + + interrupts = <GIC_SPI 102 IRQ_TYPE_NONE>, + <GIC_SPI 103 IRQ_TYPE_NONE>, + <GIC_SPI 104 IRQ_TYPE_NONE>, + <GIC_SPI 105 IRQ_TYPE_NONE>, + <GIC_SPI 106 IRQ_TYPE_NONE>, + <GIC_SPI 107 IRQ_TYPE_NONE>; + bus-range = <0x00 0xFF>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0 0x48000000 0 0x00010000 /* downstream I/O */ + 0x82000000 0 0x40000000 0x40000000 0 0x04000000>; /* non-prefetchable memory */ + phy-addr = <6>; + }; -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html