[PATCH v1 4/4] arm64: dts: imx8mq-librem5: Reduce usdhc2's post-power-on-delay-ms to 20ms

[Martin Kepplinger <martink@xxxxxxxxx>]

From: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@xxxxxxx>

This appears to be enough for both Redpine and SparkLAN cards.
Waiting for too long makes us waste time in resume from system
suspend, so let's keep it as short as possible.

Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@xxxxxxx>
Signed-off-by: Martin Kepplinger <martin.kepplinger@xxxxxxx>
---
 arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
index 3f251910b3949..e329c29f3f1c6 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
@@ -1394,7 +1394,7 @@ &usdhc2 {
 	bus-width = <4>;
 	vmmc-supply = <&reg_wifi_3v3>;
 	mmc-pwrseq = <&usdhc2_pwrseq>;
-	post-power-on-delay-ms = <1000>;
+	post-power-on-delay-ms = <20>;
 	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
 	max-frequency = <100000000>;
 	disable-wp;
-- 
2.30.2