Add pwm node to support fan on exynosautov9-sadk board. PWM channel 3 of ExynosAutov9 is connected to fan for SoC cooling in SADK board. Signed-off-by: Jaewon Kim <jaewon02.kim@xxxxxxxxxxx> --- arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts | 6 ++++++ arch/arm64/boot/dts/exynos/exynosautov9.dtsi | 10 ++++++++++ 2 files changed, 16 insertions(+) diff --git a/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts b/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts index 101f51bf565a..bc1815f6ada2 100644 --- a/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts +++ b/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts @@ -49,6 +49,12 @@ }; }; +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_tout3>; + status = "okay"; +}; + &serial_0 { pinctrl-0 = <&uart0_bus_dual>; status = "okay"; diff --git a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi index d3c5cdeff47f..3b906f4db907 100644 --- a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi +++ b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi @@ -1560,6 +1560,16 @@ samsung,syscon-phandle = <&pmu_system_controller>; samsung,cluster-index = <1>; }; + + pwm: pwm@103f0000 { + compatible = "samsung,exynosautov9-pwm", + "samsung,exynos4210-pwm"; + reg = <0x103f0000 0x100>; + samsung,pwm-outputs = <0>, <1>, <2>, <3>; + #pwm-cells = <3>; + clocks = <&xtcxo>; + clock-names = "timers"; + }; }; }; -- 2.17.1