Am Montag, 17. Juli 2023, 10:03:49 CEST schrieb Sandor Yu: > ******************** > Achtung externe E-Mail: Öffnen Sie Anhänge und Links nur, wenn Sie wissen, > dass diese aus einer sicheren Quelle stammen und sicher sind. Leiten Sie > die E-Mail im Zweifelsfall zur Prüfung an den IT-Helpdesk weiter. > Attention external email: Open attachments and links only if you know that > they are from a secure source and are safe. In doubt forward the email to > the IT-Helpdesk to check it. ******************** > > Add bindings for Cadence MHDP8501 DisplayPort/HDMI bridge.. > > Signed-off-by: Sandor Yu <Sandor.yu@xxxxxxx> > --- > .../display/bridge/cdns,mhdp8501.yaml | 105 ++++++++++++++++++ > 1 file changed, 105 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/display/bridge/cdns,mhdp8501.yaml > > diff --git > a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8501.yaml > b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8501.yaml new > file mode 100644 > index 000000000000..b983ee765f54 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8501.yaml > @@ -0,0 +1,105 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/bridge/cdns,mhdp8501.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Cadence MHDP8501 DP/HDMI bridge > + > +maintainers: > + - Sandor Yu <Sandor.yu@xxxxxxx> > + > +description: > + Cadence MHDP8501 DisplayPort/HDMI interface. > + > +properties: > + compatible: > + enum: > + - cdns,mhdp8501 > + - fsl,imx8mq-mhdp8501 > + > + reg: > + maxItems: 1 > + > + clocks: > + maxItems: 1 > + description: MHDP8501 DP/HDMI APB clock. > + > + phys: > + maxItems: 1 > + description: > + phandle to the DisplayPort or HDMI PHY > + > + interrupts: > + items: > + - description: Hotplug cable plugin. > + - description: Hotplug cable plugout. > + > + interrupt-names: > + items: > + - const: plug_in > + - const: plug_out > + > + ports: > + $ref: /schemas/graph.yaml#/properties/ports > + > + properties: > + port@0: > + $ref: /schemas/graph.yaml#/properties/port > + description: > + Input port from display controller output. > + port@1: > + $ref: /schemas/graph.yaml#/properties/port > + description: > + Output port to DisplayPort or HDMI connector. > + > + required: > + - port@0 > + - port@1 > + > +required: > + - compatible > + - reg > + - clocks > + - interrupts > + - interrupt-names > + - phys > + - ports > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/imx8mq-clock.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + > + mhdp_dp: dp-bridge@32c00000 { I'm not sure, but I would name this node just 'bridge', because it can be either DP or HDMI depending on the connector. But DT folks will know better than me. Best regards, Alexander > + compatible = "fsl,imx8mq-mhdp8501"; > + reg = <0x32c00000 0x100000>; > + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "plug_in", "plug_out"; > + clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>; > + phys = <&dp_phy>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + > + mhdp_in: endpoint { > + remote-endpoint = <&dcss_out>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + > + mhdp_out: endpoint { > + remote-endpoint = <&dp_connector>; > + }; > + }; > + }; > + }; -- TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany Amtsgericht München, HRB 105018 Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider http://www.tq-group.com/
