Re: [PATCH V3 4/6] clk: qcom: gcc-qdu1000: Update GCC clocks as per the latest hw version

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 7/15/2023 6:50 PM, Konrad Dybcio wrote:
On 6.07.2023 12:50, Imran Shaik wrote:
Update the GCC clocks as per the latest hw version of QDU1000 and
QRU100 SoCs.

Co-developed-by: Taniya Das <quic_tdas@xxxxxxxxxxx>
Signed-off-by: Taniya Das <quic_tdas@xxxxxxxxxxx>
Signed-off-by: Imran Shaik <quic_imrashai@xxxxxxxxxxx>
---
Changes since v2:
  - Split the patch as per the review comments
  - Newly added

  drivers/clk/qcom/gcc-qdu1000.c | 22 ++++++++++++++++++++++
  1 file changed, 22 insertions(+)

diff --git a/drivers/clk/qcom/gcc-qdu1000.c b/drivers/clk/qcom/gcc-qdu1000.c
index 8df7b7983968..991fb2bc97e9 100644
--- a/drivers/clk/qcom/gcc-qdu1000.c
+++ b/drivers/clk/qcom/gcc-qdu1000.c
@@ -1131,6 +1131,26 @@ static struct clk_branch gcc_ddrss_ecpri_dma_clk = {
  	},
  };
+static struct clk_branch gcc_ddrss_ecpri_gsi_clk = {
+	.halt_reg = 0x54298,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0x54298,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x54298,
+		.enable_mask = BIT(0),
+		.hw.init = &(const struct clk_init_data) {
+			.name = "gcc_ddrss_ecpri_gsi_clk",
+			.parent_hws = (const struct clk_hw*[]) {
+				&gcc_aggre_noc_ecpri_gsi_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_aon_ops,
+		},
+	},
+};
+
  static struct clk_branch gcc_ecpri_ahb_clk = {
  	.halt_reg = 0x3a008,
  	.halt_check = BRANCH_HALT_VOTED,
@@ -2521,6 +2541,8 @@ static struct clk_regmap *gcc_qdu1000_clocks[] = {
  	[GCC_AGGRE_NOC_ECPRI_GSI_CLK] = &gcc_aggre_noc_ecpri_gsi_clk.clkr,
  	[GCC_PCIE_0_PHY_AUX_CLK_SRC] = &gcc_pcie_0_phy_aux_clk_src.clkr,
  	[GCC_PCIE_0_PIPE_CLK_SRC] = &gcc_pcie_0_pipe_clk_src.clkr,
+	[GCC_GPLL1_OUT_EVEN] = &gcc_gpll1_out_even.clkr,
Looks like you split it too much.. this clock is not being defined in this patch.

Konrad

This clock was already defined in the initial gcc changes and now adding it to gcc_qdu1000_clocks[] to register it with the clock framework.

Thanks,
Imran

+	[GCC_DDRSS_ECPRI_GSI_CLK] = &gcc_ddrss_ecpri_gsi_clk.clkr,
  };
static const struct qcom_reset_map gcc_qdu1000_resets[] = {



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux