W dniu 2014-12-09 o 16:19, Philipp Zabel pisze:
Some board designers, when running out of clock output pads, decide to
(mis)use PWM output pads to provide a clock to external components.
This driver supports this practice by providing an adapter between the
PWM and clock bindings in the device tree. As the PWM bindings specify
the period in the device tree, this is a fixed clock.
Signed-off-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
---
Changes since v2:
- Added clock-frequency support to work around pwm duty cycle being
rounded to nanoseconds.
- Implemented clock-output-names support as advertised in the binding
documentation.
---
.../devicetree/bindings/clock/pwm-clock.txt | 26 +++++
drivers/clk/Kconfig | 7 ++
drivers/clk/Makefile | 1 +
drivers/clk/clk-pwm.c | 129 +++++++++++++++++++++
4 files changed, 163 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/pwm-clock.txt
create mode 100644 drivers/clk/clk-pwm.c
diff --git a/Documentation/devicetree/bindings/clock/pwm-clock.txt b/Documentation/devicetree/bindings/clock/pwm-clock.txt
new file mode 100644
index 0000000..751fff5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/pwm-clock.txt
@@ -0,0 +1,26 @@
+Binding for an external clock signal driven by a PWM pin.
+
+This binding uses the common clock binding[1] and the common PWM binding[2].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/pwm/pwm.txt
+
+Required properties:
+- compatible : shall be "pwm-clock".
+- #clock-cells : from common clock binding; shall be set to 0.
+- pwms : from common PWM binding; this determines the clock frequency
+ via the PWM period given in the pwm-specifier.
+
+Optional properties:
+- clock-output-names : From common clock binding.
+- clock-frequency : Exact output frequency, in case the pwm period
+ is not exact but was rounded to nanoseconds.
+
+Example:
+ clock {
+ compatible = "pwm-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ clock-output-names = "mipi_mclk";
+ pwms = <&pwm2 0 40>; /* 1 / 40 ns = 25 MHz */
+ };
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 455fd17..36a6918a 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -129,6 +129,13 @@ config COMMON_CLK_PALMAS
This driver supports TI Palmas devices 32KHz output KG and KG_AUDIO
using common clock framework.
+config COMMON_CLK_PWM
+ bool "Clock driver for PWMs used as clock outputs"
+ depends on PWM
+ ---help---
+ Adapter driver so that any PWM output can be (mis)used as clock signal
+ at 50% duty cycle.
+
config COMMON_CLK_PXA
def_bool COMMON_CLK && ARCH_PXA
---help---
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index d5fba5b..6a0c5cf 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -40,6 +40,7 @@ obj-$(CONFIG_ARCH_U300) += clk-u300.o
obj-$(CONFIG_ARCH_VT8500) += clk-vt8500.o
obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
obj-$(CONFIG_COMMON_CLK_XGENE) += clk-xgene.o
+obj-$(CONFIG_COMMON_CLK_PWM) += clk-pwm.o
obj-$(CONFIG_COMMON_CLK_AT91) += at91/
obj-$(CONFIG_ARCH_BCM_MOBILE) += bcm/
obj-$(CONFIG_ARCH_BERLIN) += berlin/
diff --git a/drivers/clk/clk-pwm.c b/drivers/clk/clk-pwm.c
new file mode 100644
index 0000000..2783abd
--- /dev/null
+++ b/drivers/clk/clk-pwm.c
@@ -0,0 +1,129 @@
+/*
+ * Copyright (C) 2014 Philipp Zabel, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * PWM (mis)used as clock output
+ */
+#include <linux/clk-provider.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+
+struct clk_pwm {
+ struct clk_hw hw;
+ struct pwm_device *pwm;
+ u32 fixed_rate;
+};
+
+#define to_clk_pwm(_hw) container_of(_hw, struct clk_pwm, hw)
+
+static int clk_pwm_enable(struct clk_hw *hw)
+{
+ struct clk_pwm *clk_pwm = to_clk_pwm(hw);
+
+ return pwm_enable(clk_pwm->pwm);
+}
+
+static void clk_pwm_disable(struct clk_hw *hw)
+{
+ struct clk_pwm *clk_pwm = to_clk_pwm(hw);
+
+ pwm_disable(clk_pwm->pwm);
+}
+
+static unsigned long clk_pwm_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_pwm *clk_pwm = to_clk_pwm(hw);
+
+ return clk_pwm->fixed_rate;
+}
+
+const struct clk_ops clk_pwm_ops = {
+ .enable = clk_pwm_enable,
+ .disable = clk_pwm_disable,
+ .recalc_rate = clk_pwm_recalc_rate,
+};
+
+int clk_pwm_probe(struct platform_device *pdev)
+{
+ struct device_node *node = pdev->dev.of_node;
+ struct clk_init_data init;
+ struct clk_pwm *clk_pwm;
+ struct pwm_device *pwm;
+ const char *clk_name;
+ struct clk *clk;
+ int ret;
+
+ clk_pwm = devm_kzalloc(&pdev->dev, sizeof(*clk_pwm), GFP_KERNEL);
+ if (!clk_pwm)
+ return -ENOMEM;
+
+ pwm = devm_pwm_get(&pdev->dev, NULL);
NULL or clk_name ?
+ if (IS_ERR(pwm))
+ return PTR_ERR(pwm);
+
+ if (!pwm || !pwm->period) {
+ dev_err(&pdev->dev, "invalid pwm period\n");
+ return -EINVAL;
+ }
+
+ if (of_property_read_u32(node, "clock-frequency", &clk_pwm->fixed_rate))
+ clk_pwm->fixed_rate = 1000000000 / pwm->period;
You can use NSEC_PER_SEC instead of the hardcoded value.
+
+ if (pwm->period != 1000000000 / clk_pwm->fixed_rate &&
+ pwm->period != DIV_ROUND_UP(1000000000, clk_pwm->fixed_rate)) {
+ dev_err(&pdev->dev,
+ "clock-frequency does not match pwm period\n");
+ return -EINVAL;
+ }
This can't prevent against buggy pwm driver (bad frequency)
because there is not function to read the period back, ie.
.pwm_config callback does not modify duty_ns and period_ns to real
values indeed.
There is the way to set directly
pwm->period = NSEC_PER_SEC / clk_pwm>fixed_rate;
instead of third argument (period_ns) of pwms. Although the argument is
required
(#pwm-cells >= 2 and *_xlate_* functions) it could be set to 0 in pwms.
Such calculation should be right for most PWMs if they are clocked not
faster
than eg. 40MHz. Above div-round issue can appear but it also appears due
to ns resolution.
I can't point if this is the best solution for the future.
+
+ ret = pwm_config(pwm, (pwm->period + 1) >> 1, pwm->period);
+ if (ret < 0)
+ return ret;
+
+ clk_name = node->name;
+ of_property_read_string(node, "clock-output-names", &clk_name);
+
+ init.name = clk_name;
+ init.ops = &clk_pwm_ops;
+ init.flags = CLK_IS_ROOT;
and what about CLK_IS_BASIC?
+ init.num_parents = 0;
Is it proof against suspend/resume race of pwm driver vs pwm-clock's
customer?
Otherwise chain of clocks can be broken.
+
+ clk_pwm->pwm = pwm;
+ clk_pwm->hw.init = &init;
+ clk = devm_clk_register(&pdev->dev, &clk_pwm->hw);
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ return of_clk_add_provider(node, of_clk_src_simple_get, clk);
+}
+
+int clk_pwm_remove(struct platform_device *pdev)
+{
+ of_clk_del_provider(pdev->dev.of_node);
+
+ return 0;
+}
+
+static const struct of_device_id clk_pwm_dt_ids[] = {
+ { .compatible = "pwm-clock" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, clk_pwm_dt_ids);
+
+static struct platform_driver clk_pwm_driver = {
+ .probe = clk_pwm_probe,
missing
.remove = clk_pwm_remove,
+ .driver = {
+ .name = "pwm-clock",
+ .owner = THIS_MODULE,
.owner could be removed (not a problem now)
+ .of_match_table = of_match_ptr(clk_pwm_dt_ids),
+ },
Why doesn't mcp251x trigger probe of pwm-clock driver?
The fixed-clock uses CLK_OF_DECLARE which defines .data
of of_device_id instead of .probe. Unfortunately I'm not so much
familiar with DT.
Any idea?
thanks,
Janusz
+};
+
+module_platform_driver(clk_pwm_driver);
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
