On Fri, 07 Jul 2023 14:47:03 +0800, Stanley Chang wrote: > Document the USB PHY bindings for Realtek SoCs. > Realtek DHC (digital home center) RTD SoCs support DWC3 XHCI USB > controller and using USB 2.0 PHY transceiver. > > Signed-off-by: Stanley Chang <stanley_chang@xxxxxxxxxxx> > --- > v6 to v7 change: > 1. Revise the commit message > 2. Change the property name for realtek,driving-level-compensate > 3. Add if/then schema for specific properties > v5 to v6 change: > Drop the redundant examples > Drop the label of example > v4 to v5 change: > 1. Add more examples. > 2. Remove the compatible realtek,usb2phy. > 3. Revise the descriptor of the property. > 4. Add the default of the property. > v3 to v4 change: > 1. Remove the parameter and non hardware properties from dts. > 2. Using the compatible data included the config and parameter > in driver. > v2 to v3 change: > 1. Broken down into two patches, one for each of USB 2 & 3. > 2. Add more description about Realtek RTD SoCs architecture. > 3. Removed parameter v1 support for simplification. > 4. Revised the compatible name for fallback compatible. > 5. Remove some properties that can be set in the driver. > v1 to v2 change: > Add phy-cells for generic phy driver > --- > .../bindings/phy/realtek,usb2phy.yaml | 175 ++++++++++++++++++ > 1 file changed, 175 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/realtek,usb2phy.yaml > Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
