v1.3B:
v1.3B uses motorcomm YT8531(rgmii-id phy) x2, need delay and
inverse configurations.
The tx_clk of v1.3B uses an external clock and needs to be
switched to an external clock source.
v1.2A:
v1.2A gmac0 uses motorcomm YT8531(rgmii-id) PHY, and needs delay
configurations.
v1.2A gmac1 uses motorcomm YT8512(rmii) PHY, and needs to
switch rx and rx to external clock sources.
Tested-by: Tommaso Merciai <tomm.merciai@xxxxxxxxx>
Signed-off-by: Samin Guo <samin.guo@xxxxxxxxxxxxxxxx>
---
.../jh7110-starfive-visionfive-2-v1.2a.dts | 13 +++++++
.../jh7110-starfive-visionfive-2-v1.3b.dts | 31 +++++++++++++++++
.../jh7110-starfive-visionfive-2.dtsi | 34 +++++++++++++++++++
3 files changed, 78 insertions(+)
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts
index 4af3300f3cf3..205a13d8c8b1 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts
@@ -11,3 +11,16 @@
model = "StarFive VisionFive 2 v1.2A";
compatible = "starfive,visionfive-2-v1.2a", "starfive,jh7110";
};
+
+&gmac1 {
+ phy-mode = "rmii";
+ assigned-clocks = <&syscrg JH7110_SYSCLK_GMAC1_TX>,
+ <&syscrg JH7110_SYSCLK_GMAC1_RX>;
+ assigned-clock-parents = <&syscrg JH7110_SYSCLK_GMAC1_RMII_RTX>,
+ <&syscrg JH7110_SYSCLK_GMAC1_RMII_RTX>;
+};
+
+&phy0 {
+ rx-internal-delay-ps = <1900>;
+ tx-internal-delay-ps = <1350>;
+};
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts
index 9230cc3d8946..36f74d4eda01 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts
@@ -11,3 +11,34 @@
model = "StarFive VisionFive 2 v1.3B";
compatible = "starfive,visionfive-2-v1.3b", "starfive,jh7110";
};
+
+&gmac0 {
+ starfive,tx-use-rgmii-clk;
+ assigned-clocks = <&aoncrg JH7110_AONCLK_GMAC0_TX>;
+ assigned-clock-parents = <&aoncrg JH7110_AONCLK_GMAC0_RMII_RTX>;
+};
+
+&gmac1 {
+ starfive,tx-use-rgmii-clk;
+ assigned-clocks = <&syscrg JH7110_SYSCLK_GMAC1_TX>;
+ assigned-clock-parents = <&syscrg JH7110_SYSCLK_GMAC1_RMII_RTX>;
+};
+
+&phy0 {
+ motorcomm,tx-clk-adj-enabled;
+ motorcomm,tx-clk-100-inverted;
+ motorcomm,tx-clk-1000-inverted;
+ motorcomm,rx-clk-driver-strength = <3970>;
+ motorcomm,rx-data-driver-strength = <2910>;
+ rx-internal-delay-ps = <1500>;
+ tx-internal-delay-ps = <1500>;
+};
+
+&phy1 {
+ motorcomm,tx-clk-adj-enabled;
+ motorcomm,tx-clk-100-inverted;
+ motorcomm,rx-clk-driver-strength = <3970>;
+ motorcomm,rx-data-driver-strength = <2910>;
+ rx-internal-delay-ps = <300>;
+ tx-internal-delay-ps = <0>;
+};
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
index fa0061eb33a7..fcb45db42df5 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
@@ -11,6 +11,8 @@
/ {
aliases {
+ ethernet0 = &gmac0;
+ ethernet1 = &gmac1;
i2c0 = &i2c0;
i2c2 = &i2c2;
i2c5 = &i2c5;
@@ -86,6 +88,38 @@
clock-frequency = <49152000>;
};
+&gmac0 {
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+};
+
+&gmac1 {
+ phy-handle = <&phy1>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+
+ phy1: ethernet-phy@1 {
+ reg = <0>;
+ };
+ };
+};
+
&i2c0 {
clock-frequency = <100000>;
i2c-sda-hold-time-ns = <300>;
--
2.17.1
