Hello, this v4 just fixes a botched rename in v3. The original cover letter for v3 follows: this v3 addresses the comments that the devfreq implementation got, namely: * Address misc. style issues found by Thierry and Alexander * Added helpers for register i/o * Further documented the structs * Enable the ACTMON after the IRQ handler has been installed * Disable the ACTMON before removing the IRQ handler * Add governor in a subsys initcall There's an open question on whether some functionality currently in this devfreq driver should be moved into the devfreq framework, but without knowing of other SoC family that would benefit from it, I'm reticent. It would be great to hear from the devfreq maintainers if they have any plans regarding this, or if they have any suggestion. These patches implement support for setting the rate of the EMC clock based on stats collected from the ACTMON, a piece of hw in the Tegra124 that counts memory accesses (among others). It depends on the following in-flight patches: * EMC driver: http://thread.gmane.org/gmane.linux.drivers.devicetree/99304 * CPUFreq driver: http://thread.gmane.org/gmane.linux.kernel/1812962 I have pushed a branch here for testing: http://cgit.collabora.com/git/user/tomeu/linux.git/log/?h=actmon-v4 Regards, Tomeu Tomeu Vizoso (3): of: Add binding for NVIDIA Tegra ACTMON node PM / devfreq: tegra: add devfreq driver for Tegra Activity Monitor ARM: tegra: Add Tegra124 ACTMON support .../devicetree/bindings/arm/tegra/actmon.txt | 38 + arch/arm/boot/dts/tegra124.dtsi | 23 + drivers/devfreq/Kconfig | 9 + drivers/devfreq/Makefile | 1 + drivers/devfreq/tegra-actmon-devfreq.c | 777 +++++++++++++++++++++ 5 files changed, 848 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/tegra/actmon.txt create mode 100644 drivers/devfreq/tegra-actmon-devfreq.c -- 1.9.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
