Re: [PATCH v12 2/2] i2c: aspeed: support ast2600 i2c new register mode driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 14/07/2023 09:45, Ryan Chen wrote:
> Add i2c new register mode driver to support AST2600 i2c
> new register mode. AST2600 i2c controller have legacy and
> new register mode. The new register mode have global register
> support 4 base clock for scl clock selection, and new clock
> divider mode. The i2c new register mode have separate register
> set to control i2c master and slave.
> 
> Signed-off-by: Ryan Chen <ryan_chen@xxxxxxxxxxxxxx>
> ---

...

> +	ret = devm_i2c_add_adapter(dev, &i2c_bus->adap);
> +	if (ret)
> +		return ret;
> +
> +	return 0;
> +}
> +
> +static int ast2600_i2c_remove(struct platform_device *pdev)
> +{
> +	struct ast2600_i2c_bus *i2c_bus = platform_get_drvdata(pdev);
> +
> +	/* Disable everything. */
> +	writel(0, i2c_bus->reg_base + AST2600_I2CC_FUN_CTRL);
> +	writel(0, i2c_bus->reg_base + AST2600_I2CM_IER);
> +
> +	i2c_del_adapter(&i2c_bus->adap);

I have doubts that you tested this. I think you have here double
free/del of the adapter.

> +	devm_free_irq(&pdev->dev, i2c_bus->irq, i2c_bus);
> +


Best regards,
Krzysztof




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux