RE: [PATCH v17 07/20] PCI: dwc: endpoint: Add multiple PFs support for dbi2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

> From: Serge Semin, Sent: Wednesday, July 12, 2023 5:32 AM
> 
> On Wed, Jul 05, 2023 at 08:41:53PM +0900, Yoshihiro Shimoda wrote:
> > The commit 24ede430fa49 ("PCI: designware-ep: Add multiple PFs support
> > for DWC") added .func_conf_select() to get the configuration space of
> > different PFs and assumed that the offsets between dbi and dbi would
> > be the same. However, Renesas R-Car Gen4 PCIe controllers have different
> > offsets of function 1: dbi (+0x1000) and dbi2 (+0x800). To get
> > the offset for dbi2, add .func_conf_select2() and
> > dw_pcie_ep_func_select2().
> >
> > Notes that dw_pcie_ep_func_select2() will call .func_conf_select()
> > if .func_conf_select2() doesn't exist for backward compatibility.
> >
> > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
> > ---
> >  .../pci/controller/dwc/pcie-designware-ep.c   | 32 ++++++++++++++-----
> >  drivers/pci/controller/dwc/pcie-designware.h  |  3 +-
> >  2 files changed, 26 insertions(+), 9 deletions(-)
> >
> > diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c
> > index 1d24ebf9686f..bd57516d5313 100644
> > --- a/drivers/pci/controller/dwc/pcie-designware-ep.c
> > +++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
> > @@ -54,21 +54,35 @@ static unsigned int dw_pcie_ep_func_select(struct dw_pcie_ep *ep, u8 func_no)
> >  	return func_offset;
> >  }
> >
> > +static unsigned int dw_pcie_ep_func_select2(struct dw_pcie_ep *ep, u8 func_no)
> > +{
> > +	unsigned int func_offset = 0;
> > +
> > +	if (ep->ops->func_conf_select2)
> > +		func_offset = ep->ops->func_conf_select2(ep, func_no);
> > +	else if (ep->ops->func_conf_select)	/* for backward compatibility */
> > +		func_offset = ep->ops->func_conf_select(ep, func_no);
> > +
> > +	return func_offset;
> > +}
> > +
> >  static void __dw_pcie_ep_reset_bar(struct dw_pcie *pci, u8 func_no,
> >  				   enum pci_barno bar, int flags)
> >  {
> > -	u32 reg;
> > -	unsigned int func_offset = 0;
> > +	u32 reg, reg_dbi2;
> > +	unsigned int func_offset, func_offset_dbi2;
> >  	struct dw_pcie_ep *ep = &pci->ep;
> >
> >  	func_offset = dw_pcie_ep_func_select(ep, func_no);
> > +	func_offset_dbi2 = dw_pcie_ep_func_select2(ep, func_no);
> 
> IMO this will make the code even more complicated than it's already
> with the offsets calculated and added here and there. What about
> implementing a set of methods like this:
> 
> +static void dw_pcie_ep_writeX_dbi(struct dw_pcie_ep *ep, u8 func_no, u32 reg, uYZ val)
> +{
> +	unsigned int ofs = dw_pcie_ep_func_select(ep, func_no);
> +	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> +
> +	dw_pcie_writeX_dbi(pci, reg + ofs, val);
> +}
> +
> +static uYZ dw_pcie_ep_readX_dbi(struct dw_pcie_ep *ep, u8 func_no, u32 reg)
> +{
> +	unsigned int ofs = dw_pcie_ep_func_select(ep, func_no);
> +	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> +
> +	return dw_pcie_readX_dbi(pci, reg + ofs);
> +}
> 
> and converting the entire DW PCIe EP core driver to using them instead
> of always separately calculating the func_offset? Then in a subsequent
> patch you can add a new method like this:
> 
> +static void dw_pcie_ep_writel_dbi2(struct dw_pcie_ep *ep, u8 func_no, u32 reg, u32 val)
> +{
> +	unsigned int ofs = dw_pcie_ep_func_select2(ep, func_no);
> +	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> +
> +	dw_pcie_writel_dbi2(pci, reg + ofs, val);
> +}
> 
> and have it utilized in the shadow registers update parts as you
> originally intended. This will make the code much better readable with
> no much harm to the performance since the most of setups are performed
> once during the initial end-point configuration.
> 
> Note my suggestion is quite heavy to implement and implies the code
> cleanup. So I'd wait for the maintainers comment about this (Mani is
> now responsible for the driver maintaining).
> Mani, Krzysztof, Lorenzo, Rob, what do you think about that?

To be honest, if possible, I would like to implement such clean up code
after this patch series are applied (because this patch set had been
developed for a year and more...).

Best regards,
Yoshihiro Shimoda

> -Serge(y)
> 
> >
> >  	reg = func_offset + PCI_BASE_ADDRESS_0 + (4 * bar);
> > +	reg_dbi2 = func_offset_dbi2 + PCI_BASE_ADDRESS_0 + (4 * bar);
> >  	dw_pcie_dbi_ro_wr_en(pci);
> > -	dw_pcie_writel_dbi2(pci, reg, 0x0);
> > +	dw_pcie_writel_dbi2(pci, reg_dbi2, 0x0);
> >  	dw_pcie_writel_dbi(pci, reg, 0x0);
> >  	if (flags & PCI_BASE_ADDRESS_MEM_TYPE_64) {
> > -		dw_pcie_writel_dbi2(pci, reg + 4, 0x0);
> > +		dw_pcie_writel_dbi2(pci, reg_dbi2 + 4, 0x0);
> >  		dw_pcie_writel_dbi(pci, reg + 4, 0x0);
> >  	}
> >  	dw_pcie_dbi_ro_wr_dis(pci);
> > @@ -232,13 +246,15 @@ static int dw_pcie_ep_set_bar(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
> >  	enum pci_barno bar = epf_bar->barno;
> >  	size_t size = epf_bar->size;
> >  	int flags = epf_bar->flags;
> > -	unsigned int func_offset = 0;
> > +	unsigned int func_offset, func_offset_dbi2;
> >  	int ret, type;
> > -	u32 reg;
> > +	u32 reg, reg_dbi2;
> >
> >  	func_offset = dw_pcie_ep_func_select(ep, func_no);
> > +	func_offset_dbi2 = dw_pcie_ep_func_select2(ep, func_no);
> >
> >  	reg = PCI_BASE_ADDRESS_0 + (4 * bar) + func_offset;
> > +	reg_dbi2 = PCI_BASE_ADDRESS_0 + (4 * bar) + func_offset_dbi2;
> >
> >  	if (!(flags & PCI_BASE_ADDRESS_SPACE))
> >  		type = PCIE_ATU_TYPE_MEM;
> > @@ -254,11 +270,11 @@ static int dw_pcie_ep_set_bar(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
> >
> >  	dw_pcie_dbi_ro_wr_en(pci);
> >
> > -	dw_pcie_writel_dbi2(pci, reg, lower_32_bits(size - 1));
> > +	dw_pcie_writel_dbi2(pci, reg_dbi2, lower_32_bits(size - 1));
> >  	dw_pcie_writel_dbi(pci, reg, flags);
> >
> >  	if (flags & PCI_BASE_ADDRESS_MEM_TYPE_64) {
> > -		dw_pcie_writel_dbi2(pci, reg + 4, upper_32_bits(size - 1));
> > +		dw_pcie_writel_dbi2(pci, reg_dbi2 + 4, upper_32_bits(size - 1));
> >  		dw_pcie_writel_dbi(pci, reg + 4, 0);
> >  	}
> >
> > diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
> > index 812c221b3f7c..94bc20f5f600 100644
> > --- a/drivers/pci/controller/dwc/pcie-designware.h
> > +++ b/drivers/pci/controller/dwc/pcie-designware.h
> > @@ -340,9 +340,10 @@ struct dw_pcie_ep_ops {
> >  	 * access for different platform, if different func have different
> >  	 * offset, return the offset of func. if use write a register way
> >  	 * return a 0, and implement code in callback function of platform
> > -	 * driver.
> > +	 * driver. The func_conf_select2 is for dbi2.
> >  	 */
> >  	unsigned int (*func_conf_select)(struct dw_pcie_ep *ep, u8 func_no);
> > +	unsigned int (*func_conf_select2)(struct dw_pcie_ep *ep, u8 func_no);
> >  };
> >
> >  struct dw_pcie_ep_func {
> > --
> > 2.25.1
> >




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux