On 12/08/14 23:21, Lad, Prabhakar wrote:
> From: Benoit Parrot <bparrot@xxxxxx>
>
> This patch adds Video Processing Front End (VPFE) driver for
> AM437X family of devices
> Driver supports the following:
> - V4L2 API using MMAP buffer access based on videobuf2 api
> - Asynchronous sensor/decoder sub device registration
> - DT support
>
> Signed-off-by: Benoit Parrot <bparrot@xxxxxx>
> Signed-off-by: Darren Etheridge <detheridge@xxxxxx>
> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@xxxxxxxxx>
> ---
> Changes for v5:
> 1: Fixed review comments pointed out by Hans, fixing race condition.
>
> v4l2-compliance output:
Thanks!
<snip>
> ----------------------
>
> diff --git a/drivers/media/platform/am437x/am437x-vpfe.c b/drivers/media/platform/am437x/am437x-vpfe.c
> new file mode 100644
> index 0000000..c2b29a2
> --- /dev/null
> +++ b/drivers/media/platform/am437x/am437x-vpfe.c
> +/*
> + * vpfe_release : This function is based on the vb2_fop_release
> + * helper function.
> + * It has been augmented to handle module power management,
> + * by disabling/enabling h/w module fcntl clock when necessary.
> + */
> +static int vpfe_release(struct file *file)
> +{
> + struct vpfe_device *vpfe = video_drvdata(file);
> + bool close = v4l2_fh_is_singular_file(file);
> + int ret;
> +
> + vpfe_dbg(2, vpfe, "vpfe_release\n");
> +
> + mutex_lock(&vpfe->lock);
The v4l2_fh_is_singular_file() call should be inside the lock as well.
So:
close = v4l2_fh_is_singular_file(file);
> +
> + ret = _vb2_fop_release(file, NULL);
> + if (close)
> + vpfe_ccdc_close(&vpfe->ccdc, vpfe->pdev);
> +
> + mutex_unlock(&vpfe->lock);
> +
> + return ret;
> +}
> +
> +/*
> + * vpfe_open : This function is based on the v4l2_fh_open helper function.
> + * It has been augmented to handle module power management,
> + * by disabling/enabling h/w module fcntl clock when necessary.
> + */
> +static int vpfe_open(struct file *file)
> +{
> + struct vpfe_device *vpfe = video_drvdata(file);
> + int ret;
> +
> + ret = v4l2_fh_open(file);
Same here, v4l2_fh_open should be inside the lock.
> + if (ret) {
> + vpfe_err(vpfe, "v4l2_fh_open failed\n");
> + return ret;
> + }
> +
> + mutex_lock(&vpfe->lock);
So:
ret = v4l2_fh_open(file);
if (ret) {
vpfe_err(vpfe, "v4l2_fh_open failed\n");
goto unlock;
}
> +
> + if (!v4l2_fh_is_singular_file(file))
> + goto unlock;
> +
> + if (vpfe_initialize_device(vpfe)) {
> + v4l2_fh_release(file);
> + ret = -ENODEV;
> + }
> +
> +unlock:
> + mutex_unlock(&vpfe->lock);
> + return ret;
> +}
Regards,
Hans
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
