Hi, 2014-12-09 3:43 GMT+01:00 Yunzhi Li <lyz@xxxxxxxxxxxxxx>: > Changes in v3: > - Use BIT macro instead of bit shift ops. > - Rename the config entry to PHY_ROCKCHIP_USB. Contradiction between this , [1] and [2] > > drivers/phy/Kconfig | 7 ++ > drivers/phy/Makefile | 1 + > drivers/phy/phy-rockchip-usb.c | 211 +++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 219 insertions(+) > create mode 100644 drivers/phy/phy-rockchip-usb.c > > diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig > index ccad880..8a39d2a 100644 > --- a/drivers/phy/Kconfig > +++ b/drivers/phy/Kconfig > @@ -239,6 +239,13 @@ config PHY_QCOM_IPQ806X_SATA > depends on OF > select GENERIC_PHY > > +config PHY_ROCKCHIP_USB2 > + tristate "Rockchip USB2 PHY Driver" > + depends on ARCH_ROCKCHIP && OF > + select GENERIC_PHY > + help > + Enable this to support the Rockchip USB 2.0 PHY. > + 1. The config entry ends by "USB2". Explain that your driver is for usb 2.0 in the description is enough, imho. > config PHY_ST_SPEAR1310_MIPHY > tristate "ST SPEAR1310-MIPHY driver" > select GENERIC_PHY > diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile > index aa74f96..8a13f72 100644 > --- a/drivers/phy/Makefile > +++ b/drivers/phy/Makefile > @@ -28,6 +28,7 @@ phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o > phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o > obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o > obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o > +obj-$(CONFIG_PHY_ROCKCHIP_USB2) += phy-rockchip-usb.o 2. and... this :) Romain -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
