Re: [PATCH 1/2] dt-bindings: net: fsl,fec: Add TX clock controls

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Ahmad,

On 13.7.2023 11.47, Ahmad Fatoum wrote:
Hello Vesa,

On 13.07.23 10:29, Vesa Jääskeläinen wrote:
Hi Krzysztof,

On 12.7.2023 23.36, Krzysztof Kozlowski wrote:
On 11/07/2023 17:08, Vesa Jääskeläinen wrote:
With fsl,fec-tx-clock-output one can control if TX clock is routed outside
of the chip.

With fsl,fec-tx-clk-as-ref-clock one can select if external TX clock is as
reference clock.

Signed-off-by: Vesa Jääskeläinen <vesa.jaaskelainen@xxxxxxxxxxx>
---
   .../devicetree/bindings/net/fsl,fec.yaml          | 15 +++++++++++++++
   1 file changed, 15 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/fsl,fec.yaml b/Documentation/devicetree/bindings/net/fsl,fec.yaml
index b494e009326e..c09105878bc6 100644
--- a/Documentation/devicetree/bindings/net/fsl,fec.yaml
+++ b/Documentation/devicetree/bindings/net/fsl,fec.yaml
@@ -166,6 +166,21 @@ properties:
       description:
         If present, indicates that the hardware supports waking up via magic packet.
   +  fsl,fec-tx-clock-output:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If present, ENETx_TX_CLK output driver is enabled.
+      If not present, ENETx_TX_CLK output driver is disabled.
Here...

+
+  fsl,fec-tx-clk-as-ref-clock:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If present, gets ENETx TX reference clk from the ENETx_TX_CLK pin. In
+      this use case, an external OSC provides the clock for both the external
+      PHY and the internal controller.
+      If not present, ENETx TX reference clock is driven by ref_enetpllx. This
+      clock is also output to pins via the IOMUX.ENET_REF_CLKx function.
and here:
In general, Common Clock Framework and its bindings should be used for
handling clock providers and consumers. Why it cannot be used for these
two cases?
Did you have something specific in mind on how it could be modeled?

I tried to look at:
Documentation/devicetree/bindings/clock/

But didn't spot anything for this.
This has been implemented for i.MX6Q/DL using CCF. Please follow suit
for SoloX. See series at:
https://lore.kernel.org/all/20230131084642.709385-1-o.rempel@xxxxxxxxxxxxxx/

Thanks,
Ahmad

Thanks for the reference. This looks promising.

Let me try it out.

Thanks,
Vesa Jääskeläinen




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux