Re: [PATCH v7 6/9] clk: starfive: Add StarFive JH7110 Video-Output clock driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2023/7/13 2:08, Emil Renner Berthing wrote:
> On Wed, 12 Jul 2023 at 11:22, Xingyu Wu <xingyu.wu@xxxxxxxxxxxxxxxx> wrote:
>>
>> Add driver for the StarFive JH7110 Video-Output clock controller.
>> And these clock controllers should power on and enable the clocks from
>> SYSCRG first before registering.
>>
>> Reviewed-by: Hal Feng <hal.feng@xxxxxxxxxxxxxxxx>
>> Signed-off-by: Xingyu Wu <xingyu.wu@xxxxxxxxxxxxxxxx>
>> ---
>>  drivers/clk/starfive/Kconfig                  |   8 +
>>  drivers/clk/starfive/Makefile                 |   1 +
>>  .../clk/starfive/clk-starfive-jh7110-vout.c   | 239 ++++++++++++++++++
>>  3 files changed, 248 insertions(+)
>>  create mode 100644 drivers/clk/starfive/clk-starfive-jh7110-vout.c
>>
>> diff --git a/drivers/clk/starfive/Kconfig b/drivers/clk/starfive/Kconfig
>> index 13b4d08cbcd2..3fa983eb7d32 100644
>> --- a/drivers/clk/starfive/Kconfig
>> +++ b/drivers/clk/starfive/Kconfig
>> @@ -55,3 +55,11 @@ config CLK_STARFIVE_JH7110_ISP
>>         help
>>           Say yes here to support the Image-Signal-Process clock controller
>>           on the StarFive JH7110 SoC.
>> +
>> +config CLK_STARFIVE_JH7110_VOUT
>> +       tristate "StarFive JH7110 Video-Output clock support"
>> +       depends on CLK_STARFIVE_JH7110_SYS && JH71XX_PMU
>> +       default m if ARCH_STARFIVE
>> +       help
>> +         Say yes here to support the Video-Output clock controller
>> +         on the StarFive JH7110 SoC.
>> diff --git a/drivers/clk/starfive/Makefile b/drivers/clk/starfive/Makefile
>> index 76fb9f8d628b..841377e45bb6 100644
>> --- a/drivers/clk/starfive/Makefile
>> +++ b/drivers/clk/starfive/Makefile
>> @@ -8,3 +8,4 @@ obj-$(CONFIG_CLK_STARFIVE_JH7110_SYS)   += clk-starfive-jh7110-sys.o
>>  obj-$(CONFIG_CLK_STARFIVE_JH7110_AON)  += clk-starfive-jh7110-aon.o
>>  obj-$(CONFIG_CLK_STARFIVE_JH7110_STG)  += clk-starfive-jh7110-stg.o
>>  obj-$(CONFIG_CLK_STARFIVE_JH7110_ISP)  += clk-starfive-jh7110-isp.o
>> +obj-$(CONFIG_CLK_STARFIVE_JH7110_VOUT) += clk-starfive-jh7110-vout.o
>> diff --git a/drivers/clk/starfive/clk-starfive-jh7110-vout.c b/drivers/clk/starfive/clk-starfive-jh7110-vout.c
>> new file mode 100644
>> index 000000000000..743840e03d81
>> --- /dev/null
>> +++ b/drivers/clk/starfive/clk-starfive-jh7110-vout.c
>> @@ -0,0 +1,239 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * StarFive JH7110 Video-Output Clock Driver
>> + *
>> + * Copyright (C) 2022-2023 StarFive Technology Co., Ltd.
>> + */
>> +
>> +#include <linux/clk.h>
>> +#include <linux/clk-provider.h>
>> +#include <linux/io.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/pm_runtime.h>
>> +#include <linux/reset.h>
>> +
>> +#include <dt-bindings/clock/starfive,jh7110-crg.h>
>> +
>> +#include "clk-starfive-jh7110.h"
>> +
>> +/* external clocks */
>> +#define JH7110_VOUTCLK_VOUT_SRC                        (JH7110_VOUTCLK_END + 0)
>> +#define JH7110_VOUTCLK_VOUT_TOP_AHB            (JH7110_VOUTCLK_END + 1)
>> +#define JH7110_VOUTCLK_VOUT_TOP_AXI            (JH7110_VOUTCLK_END + 2)
>> +#define JH7110_VOUTCLK_VOUT_TOP_HDMITX0_MCLK   (JH7110_VOUTCLK_END + 3)
>> +#define JH7110_VOUTCLK_I2STX0_BCLK             (JH7110_VOUTCLK_END + 4)
>> +#define JH7110_VOUTCLK_HDMITX0_PIXELCLK                (JH7110_VOUTCLK_END + 5)
>> +#define JH7110_VOUTCLK_EXT_END                 (JH7110_VOUTCLK_END + 6)
>> +
>> +static struct clk_bulk_data jh7110_vout_top_clks[] = {
>> +       { .id = "vout_src" },
>> +       { .id = "vout_top_ahb" }
>> +};
>> +
>> +static const struct jh71x0_clk_data jh7110_voutclk_data[] = {
>> +       /* divider */
>> +       JH71X0__DIV(JH7110_VOUTCLK_APB, "apb", 8, JH7110_VOUTCLK_VOUT_TOP_AHB),
>> +       JH71X0__DIV(JH7110_VOUTCLK_DC8200_PIX, "dc8200_pix", 63, JH7110_VOUTCLK_VOUT_SRC),
>> +       JH71X0__DIV(JH7110_VOUTCLK_DSI_SYS, "dsi_sys", 31, JH7110_VOUTCLK_VOUT_SRC),
>> +       JH71X0__DIV(JH7110_VOUTCLK_TX_ESC, "tx_esc", 31, JH7110_VOUTCLK_VOUT_TOP_AHB),
>> +       /* dc8200 */
>> +       JH71X0_GATE(JH7110_VOUTCLK_DC8200_AXI, "dc8200_axi", 0, JH7110_VOUTCLK_VOUT_TOP_AXI),
>> +       JH71X0_GATE(JH7110_VOUTCLK_DC8200_CORE, "dc8200_core", 0, JH7110_VOUTCLK_VOUT_TOP_AXI),
>> +       JH71X0_GATE(JH7110_VOUTCLK_DC8200_AHB, "dc8200_ahb", 0, JH7110_VOUTCLK_VOUT_TOP_AHB),
>> +       JH71X0_GMUX(JH7110_VOUTCLK_DC8200_PIX0, "dc8200_pix0", 0, 2,
>> +                   JH7110_VOUTCLK_DC8200_PIX,
>> +                   JH7110_VOUTCLK_HDMITX0_PIXELCLK),
>> +       JH71X0_GMUX(JH7110_VOUTCLK_DC8200_PIX1, "dc8200_pix1", 0, 2,
>> +                   JH7110_VOUTCLK_DC8200_PIX,
>> +                   JH7110_VOUTCLK_HDMITX0_PIXELCLK),
>> +       /* LCD */
>> +       JH71X0_GMUX(JH7110_VOUTCLK_DOM_VOUT_TOP_LCD, "dom_vout_top_lcd", 0, 2,
>> +                   JH7110_VOUTCLK_DC8200_PIX0,
>> +                   JH7110_VOUTCLK_DC8200_PIX1),
>> +       /* dsiTx */
>> +       JH71X0_GATE(JH7110_VOUTCLK_DSITX_APB, "dsiTx_apb", 0, JH7110_VOUTCLK_DSI_SYS),
>> +       JH71X0_GATE(JH7110_VOUTCLK_DSITX_SYS, "dsiTx_sys", 0, JH7110_VOUTCLK_DSI_SYS),
>> +       JH71X0_GMUX(JH7110_VOUTCLK_DSITX_DPI, "dsiTx_dpi", 0, 2,
>> +                   JH7110_VOUTCLK_DC8200_PIX,
>> +                   JH7110_VOUTCLK_HDMITX0_PIXELCLK),
>> +       JH71X0_GATE(JH7110_VOUTCLK_DSITX_TXESC, "dsiTx_txesc", 0, JH7110_VOUTCLK_TX_ESC),
>> +       /* mipitx DPHY */
>> +       JH71X0_GATE(JH7110_VOUTCLK_MIPITX_DPHY_TXESC, "mipitx_dphy_txesc", 0,
>> +                   JH7110_VOUTCLK_TX_ESC),
>> +       /* hdmi */
>> +       JH71X0_GATE(JH7110_VOUTCLK_HDMI_TX_MCLK, "hdmi_tx_mclk", 0,
>> +                   JH7110_VOUTCLK_VOUT_TOP_HDMITX0_MCLK),
>> +       JH71X0_GATE(JH7110_VOUTCLK_HDMI_TX_BCLK, "hdmi_tx_bclk", 0,
>> +                   JH7110_VOUTCLK_I2STX0_BCLK),
>> +       JH71X0_GATE(JH7110_VOUTCLK_HDMI_TX_SYS, "hdmi_tx_sys", 0, JH7110_VOUTCLK_APB),
>> +};
>> +
>> +static int jh7110_vout_top_rst_init(struct jh71x0_clk_priv *priv)
>> +{
>> +       struct reset_control *top_rst;
>> +
>> +       /* The reset should be shared and other Vout modules will use its. */
>> +       top_rst = devm_reset_control_get_shared(priv->dev, NULL);
>> +       if (IS_ERR(top_rst))
>> +               return dev_err_probe(priv->dev, PTR_ERR(top_rst), "failed to get top reset\n");
>> +
>> +       return reset_control_deassert(top_rst);
>> +}
>> +
>> +static struct clk_hw *jh7110_voutclk_get(struct of_phandle_args *clkspec, void *data)
>> +{
>> +       struct jh71x0_clk_priv *priv = data;
>> +       unsigned int idx = clkspec->args[0];
>> +
>> +       if (idx < JH7110_VOUTCLK_END)
>> +               return &priv->reg[idx].hw;
>> +
>> +       return ERR_PTR(-EINVAL);
>> +}
>> +
>> +#ifdef CONFIG_PM
>> +static int jh7110_voutcrg_suspend(struct device *dev)
>> +{
>> +       struct top_sysclk *top = dev_get_drvdata(dev);
>> +
>> +       clk_bulk_disable_unprepare(top->top_clks_num, top->top_clks);
>> +
>> +       return 0;
>> +}
>> +
>> +static int jh7110_voutcrg_resume(struct device *dev)
>> +{
>> +       struct top_sysclk *top = dev_get_drvdata(dev);
>> +
>> +       return clk_bulk_prepare_enable(top->top_clks_num, top->top_clks);
>> +}
>> +#endif
> 
> nit: you could move this #endif down below jh7110_voutcrg_pm_ops, and then do
> 
>   .pm = pm_ptr(&jh7110_voutcrg_pm_ops),
> 
> In any case
> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@xxxxxxxxxxxxx>

Will fix in both VOUTCRG and ISPCEG drivers. Thanks.

Best regards,
Xingyu Wu

> 
>> +static const struct dev_pm_ops jh7110_voutcrg_pm_ops = {
>> +       SET_RUNTIME_PM_OPS(jh7110_voutcrg_suspend, jh7110_voutcrg_resume, NULL)
>> +};
>> +
>> +static int jh7110_voutcrg_probe(struct platform_device *pdev)
>> +{
>> +       struct jh71x0_clk_priv *priv;
>> +       struct top_sysclk *top;
>> +       unsigned int idx;
>> +       int ret;
>> +
>> +       priv = devm_kzalloc(&pdev->dev,
>> +                           struct_size(priv, reg, JH7110_VOUTCLK_END),
>> +                           GFP_KERNEL);
>> +       if (!priv)
>> +               return -ENOMEM;
>> +
>> +       top = devm_kzalloc(&pdev->dev, sizeof(*top), GFP_KERNEL);
>> +       if (!top)
>> +               return -ENOMEM;
>> +
>> +       spin_lock_init(&priv->rmw_lock);
>> +       priv->dev = &pdev->dev;
>> +       priv->base = devm_platform_ioremap_resource(pdev, 0);
>> +       if (IS_ERR(priv->base))
>> +               return PTR_ERR(priv->base);
>> +
>> +       top->top_clks = jh7110_vout_top_clks;
>> +       top->top_clks_num = ARRAY_SIZE(jh7110_vout_top_clks);
>> +       ret = devm_clk_bulk_get(priv->dev, top->top_clks_num, top->top_clks);
>> +       if (ret)
>> +               return dev_err_probe(priv->dev, ret, "failed to get top clocks\n");
>> +       dev_set_drvdata(priv->dev, top);
>> +
>> +       /* enable power domain and clocks */
>> +       pm_runtime_enable(priv->dev);
>> +       ret = pm_runtime_get_sync(priv->dev);
>> +       if (ret < 0)
>> +               return dev_err_probe(priv->dev, ret, "failed to turn on power\n");
>> +
>> +       ret = jh7110_vout_top_rst_init(priv);
>> +       if (ret)
>> +               goto err_exit;
>> +
>> +       for (idx = 0; idx < JH7110_VOUTCLK_END; idx++) {
>> +               u32 max = jh7110_voutclk_data[idx].max;
>> +               struct clk_parent_data parents[4] = {};
>> +               struct clk_init_data init = {
>> +                       .name = jh7110_voutclk_data[idx].name,
>> +                       .ops = starfive_jh71x0_clk_ops(max),
>> +                       .parent_data = parents,
>> +                       .num_parents =
>> +                               ((max & JH71X0_CLK_MUX_MASK) >> JH71X0_CLK_MUX_SHIFT) + 1,
>> +                       .flags = jh7110_voutclk_data[idx].flags,
>> +               };
>> +               struct jh71x0_clk *clk = &priv->reg[idx];
>> +               unsigned int i;
>> +               const char *fw_name[JH7110_VOUTCLK_EXT_END - JH7110_VOUTCLK_END] = {
>> +                       "vout_src",
>> +                       "vout_top_ahb",
>> +                       "vout_top_axi",
>> +                       "vout_top_hdmitx0_mclk",
>> +                       "i2stx0_bclk",
>> +                       "hdmitx0_pixelclk"
>> +               };
>> +
>> +               for (i = 0; i < init.num_parents; i++) {
>> +                       unsigned int pidx = jh7110_voutclk_data[idx].parents[i];
>> +
>> +                       if (pidx < JH7110_VOUTCLK_END)
>> +                               parents[i].hw = &priv->reg[pidx].hw;
>> +                       else if (pidx < JH7110_VOUTCLK_EXT_END)
>> +                               parents[i].fw_name = fw_name[pidx - JH7110_VOUTCLK_END];
>> +               }
>> +
>> +               clk->hw.init = &init;
>> +               clk->idx = idx;
>> +               clk->max_div = max & JH71X0_CLK_DIV_MASK;
>> +
>> +               ret = devm_clk_hw_register(&pdev->dev, &clk->hw);
>> +               if (ret)
>> +                       goto err_exit;
>> +       }
>> +
>> +       ret = devm_of_clk_add_hw_provider(&pdev->dev, jh7110_voutclk_get, priv);
>> +       if (ret)
>> +               goto err_exit;
>> +
>> +       ret = jh7110_reset_controller_register(priv, "rst-vo", 4);
>> +       if (ret)
>> +               goto err_exit;
>> +
>> +       return 0;
>> +
>> +err_exit:
>> +       pm_runtime_put_sync(priv->dev);
>> +       pm_runtime_disable(priv->dev);
>> +       return ret;
>> +}
>> +
>> +static int jh7110_voutcrg_remove(struct platform_device *pdev)
>> +{
>> +       pm_runtime_put_sync(&pdev->dev);
>> +       pm_runtime_disable(&pdev->dev);
>> +
>> +       return 0;
>> +}
>> +
>> +static const struct of_device_id jh7110_voutcrg_match[] = {
>> +       { .compatible = "starfive,jh7110-voutcrg" },
>> +       { /* sentinel */ }
>> +};
>> +MODULE_DEVICE_TABLE(of, jh7110_voutcrg_match);
>> +
>> +static struct platform_driver jh7110_voutcrg_driver = {
>> +       .probe = jh7110_voutcrg_probe,
>> +       .remove = jh7110_voutcrg_remove,
>> +       .driver = {
>> +               .name = "clk-starfive-jh7110-vout",
>> +               .of_match_table = jh7110_voutcrg_match,
>> +               .pm = &jh7110_voutcrg_pm_ops,
>> +       },
>> +};
>> +module_platform_driver(jh7110_voutcrg_driver);
>> +
>> +MODULE_AUTHOR("Xingyu Wu <xingyu.wu@xxxxxxxxxxxxxxxx>");
>> +MODULE_DESCRIPTION("StarFive JH7110 Video-Output clock driver");
>> +MODULE_LICENSE("GPL");
>> --





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux