Needed to enable this chip on a Renesas KingFisher board. Description
copied over from the Mediatek driver which already supports it.
Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml b/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml
index 4835a280b3bf..8f6992b97ca6 100644
--- a/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml
+++ b/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml
@@ -41,6 +41,12 @@ properties:
description: >
Backup voltage regulator
+ reset-gpios:
+ maxItems: 1
+ description: >
+ An optional reset line, with names such as RESET or NRESET.
+ If the line is active low it should be flagged with GPIO_ACTIVE_LOW.
+
required:
- compatible
- vcc-supply
@@ -54,5 +60,6 @@ examples:
compatible = "u-blox,neo-8";
v-bckp-supply = <&gnss_v_bckp_reg>;
vcc-supply = <&gnss_vcc_reg>;
+ reset-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
};
--
2.30.2
