The series adds support for the display on the stm32f746-disco board. Changes in v6: - Remove dma nodes from stm32f746-disco.dts, they are not used by LTDC, so there is no need to enable them. Changes in v5: I am confident that framebuffer sizing is a real requirement for STM32 boards, but I need some time to understand if and how to introduce this functionality. Therefore, I drop the following patches to allow the series to be fully merged: - [4/6] dt-bindings: display: stm32-ltdc: add optional st,fb-bpp property - [5/6] ARM: dts: stm32: set framebuffer bit depth on stm32f746-disco - [6/6] drm/stm: set framebuffer bit depth through DTS property Changes in v4: - Use DTS property instead of module parameter to set the framebuffer bit depth. Changes in v3: - rename ltdc-pins-a-0 to ltdc-0. - drop [4/6] dt-bindings: display: simple: add Rocktech RK043FN48H Applied to https://anongit.freedesktop.org/git/drm/drm-misc.git (drm-misc-next): https://cgit.freedesktop.org/drm/drm-misc/commit/?id=c42a37a27c777d63961dd634a30f7c887949491a - drop [5/6] drm/panel: simple: add support for Rocktech RK043FN48H panel Applied to https://anongit.freedesktop.org/git/drm/drm-misc.git (drm-misc-next) https://cgit.freedesktop.org/drm/drm-misc/commit/?id=13cdd12a9f934158f4ec817cf048fcb4384aa9dc Dario Binacchi (3): ARM: dts: stm32: add ltdc support on stm32f746 MCU ARM: dts: stm32: add pin map for LTDC on stm32f7 ARM: dts: stm32: support display on stm32f746-disco board arch/arm/boot/dts/st/stm32f7-pinctrl.dtsi | 35 ++++++++++++++++++ arch/arm/boot/dts/st/stm32f746-disco.dts | 43 +++++++++++++++++++++++ arch/arm/boot/dts/st/stm32f746.dtsi | 10 ++++++ 3 files changed, 88 insertions(+) -- 2.32.0
