I am unsure whether to add this with a generic name, such as 'layout', but for now am using /firmware/binman to avoid conflicts with any other firmware-layout schema that others might be working on. Signed-off-by: Simon Glass <sjg@xxxxxxxxxxxx> --- dtschema/schemas/firmware/binman.yaml | 51 ++++++++++++++++++ dtschema/schemas/firmware/binman/entry.yaml | 57 +++++++++++++++++++++ 2 files changed, 108 insertions(+) create mode 100644 dtschema/schemas/firmware/binman.yaml create mode 100644 dtschema/schemas/firmware/binman/entry.yaml diff --git a/dtschema/schemas/firmware/binman.yaml b/dtschema/schemas/firmware/binman.yaml new file mode 100644 index 0000000..4b1ecf6 --- /dev/null +++ b/dtschema/schemas/firmware/binman.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2023 Google LLC + +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/firmware/binman.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Binman firmware layout + +maintainers: + - Simon Glass <sjg@xxxxxxxxxxxx> + +description: | + The binman node provides a layout for firmware, used when packaging firmware + from multiple projects. For now it just supports a very simple set of + features, as a starting point for discussion. + + Documentation for Binman is available at: + + https://u-boot.readthedocs.io/en/latest/develop/package/binman.html + + with the current image-description format at: + + https://u-boot.readthedocs.io/en/latest/develop/package/binman.html#image-description-format + +properties: + $nodename: + const: binman + +required: + - compatible + +additionalProperties: false + +examples: + - | + - | + firmware { + binman { + compatible = "u-boot,binman"; + + u-boot { + size = <0xa0000>; + }; + + atf-bl31 { + offset = <0x100000>; + }; + }; + }; diff --git a/dtschema/schemas/firmware/binman/entry.yaml b/dtschema/schemas/firmware/binman/entry.yaml new file mode 100644 index 0000000..16b84c5 --- /dev/null +++ b/dtschema/schemas/firmware/binman/entry.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2023 Google LLC + +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/firmware/binman/entry.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Binman entry + +maintainers: + - Simon Glass <sjg@xxxxxxxxxxxx> + +description: | + The entry node specifies a single entry in the firmware. + + Entries have a specific type, such as "u-boot" or "atf-bl31". If the type + is missing, the name is used as the type. + + Note: This definition is intended to be hierarchical, so that entries can + appear in other entries. Schema for that is TBD. + +properties: + $nodename: + pattern: "^[-a-z]+(-[0-9]+)?$" + + type: + $ref: /schemas/types.yaml#/definitions/string + + offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Provides the offset of this entry from the start of its parent section. + + size: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Provides the size of this entry in bytes. + +additionalProperties: false + +examples: + - | + firmware { + binman { + compatible = "u-boot,binman"; + + u-boot { + size = <0xa0000>; + }; + + second-area { + type = "atf-bl31"; + offset = <0x100000>; + }; + }; + }; -- 2.41.0.255.g8b1d071c50-goog
