Re: [PATCH v17 06/20] PCI: designware-ep: Add INTx IRQs support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jul 05, 2023 at 08:41:52PM +0900, Yoshihiro Shimoda wrote:
> Add support for triggering INTx IRQs by using outbound iATU.
> Outbound iATU is utilized to send assert and de-assert INTx TLPs.
> The message is generated based on the payloadless Msg TLP with type
> 0x14, where 0x4 is the routing code implying the Terminate at
> Receiver message. The message code is specified as b1000xx for
> the INTx assertion and b1001xx for the INTx de-assertion.

Looking good. Feel free to add:
Reviewed-by: Serge Semin <fancer.lancer@xxxxxxxxx>

-Serge(y)

> 
> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
> ---
>  .../pci/controller/dwc/pcie-designware-ep.c   | 69 +++++++++++++++++--
>  drivers/pci/controller/dwc/pcie-designware.h  |  2 +
>  2 files changed, 67 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c
> index fe2e0d765be9..1d24ebf9686f 100644
> --- a/drivers/pci/controller/dwc/pcie-designware-ep.c
> +++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
> @@ -6,9 +6,11 @@
>   * Author: Kishon Vijay Abraham I <kishon@xxxxxx>
>   */
>  
> +#include <linux/delay.h>
>  #include <linux/of.h>
>  #include <linux/platform_device.h>
>  
> +#include "../../pci.h"
>  #include "pcie-designware.h"
>  #include <linux/pci-epc.h>
>  #include <linux/pci-epf.h>
> @@ -484,14 +486,60 @@ static const struct pci_epc_ops epc_ops = {
>  	.get_features		= dw_pcie_ep_get_features,
>  };
>  
> +static int dw_pcie_ep_send_msg(struct dw_pcie_ep *ep, u8 func_no, u8 code,
> +			       u8 routing)
> +{
> +	struct dw_pcie_ob_atu_cfg atu = { 0 };
> +	struct pci_epc *epc = ep->epc;
> +	int ret;
> +
> +	atu.func_no = func_no;
> +	atu.code = code;
> +	atu.routing = routing;
> +	atu.type = PCIE_ATU_TYPE_MSG;
> +	atu.cpu_addr = ep->intx_mem_phys;
> +	atu.size = epc->mem->window.page_size;
> +
> +	ret = dw_pcie_ep_outbound_atu(ep, &atu);
> +	if (ret)
> +		return ret;
> +
> +	writel(0, ep->intx_mem);
> +
> +	dw_pcie_ep_unmap_addr(epc, func_no, 0, ep->intx_mem_phys);
> +
> +	return 0;
> +}
> +
>  int dw_pcie_ep_raise_intx_irq(struct dw_pcie_ep *ep, u8 func_no)
>  {
>  	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
>  	struct device *dev = pci->dev;
> +	int ret;
>  
> -	dev_err(dev, "EP cannot trigger INTx IRQs\n");
> +	if (!ep->intx_mem) {
> +		dev_err(dev, "INTx not supported\n");
> +		return -EOPNOTSUPP;
> +	}
>  
> -	return -EINVAL;
> +	/*
> +	 * Even though the PCI bus specification implies the level-triggered
> +	 * INTx interrupts the kernel PCIe endpoint framework has a single
> +	 * PCI_EPC_IRQ_INTx flag defined for the legacy IRQs simulation. Thus
> +	 * this function sends the Deassert_INTx PCIe TLP after the Assert_INTx
> +	 * message with the 50 usec duration basically implementing the
> +	 * rising-edge triggering IRQ. Hopefully the interrupt controller will
> +	 * still be able to register the incoming IRQ event...
> +	 */
> +	ret = dw_pcie_ep_send_msg(ep, func_no, PCI_MSG_CODE_ASSERT_INTA,
> +				  PCI_MSG_TYPE_R_ROUTING_LOCAL);
> +	if (ret)
> +		return ret;
> +
> +	usleep_range(50, 100);
> +
> +	return dw_pcie_ep_send_msg(ep, func_no, PCI_MSG_CODE_DEASSERT_INTA,
> +				   PCI_MSG_TYPE_R_ROUTING_LOCAL);
>  }
>  EXPORT_SYMBOL_GPL(dw_pcie_ep_raise_intx_irq);
>  
> @@ -622,6 +670,10 @@ void dw_pcie_ep_exit(struct dw_pcie_ep *ep)
>  
>  	dw_pcie_edma_remove(pci);
>  
> +	if (ep->intx_mem)
> +		pci_epc_mem_free_addr(epc, ep->intx_mem_phys, ep->intx_mem,
> +				      epc->mem->window.page_size);
> +
>  	pci_epc_mem_free_addr(epc, ep->msi_mem_phys, ep->msi_mem,
>  			      epc->mem->window.page_size);
>  
> @@ -793,9 +845,14 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep)
>  		goto err_exit_epc_mem;
>  	}
>  
> +	ep->intx_mem = pci_epc_mem_alloc_addr(epc, &ep->intx_mem_phys,
> +					      epc->mem->window.page_size);
> +	if (!ep->intx_mem)
> +		dev_warn(dev, "Failed to reserve memory for INTx\n");
> +
>  	ret = dw_pcie_edma_detect(pci);
>  	if (ret)
> -		goto err_free_epc_mem;
> +		goto err_free_epc_mem_intx;
>  
>  	if (ep->ops->get_features) {
>  		epc_features = ep->ops->get_features(ep);
> @@ -812,7 +869,11 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep)
>  err_remove_edma:
>  	dw_pcie_edma_remove(pci);
>  
> -err_free_epc_mem:
> +err_free_epc_mem_intx:
> +	if (ep->intx_mem)
> +		pci_epc_mem_free_addr(epc, ep->intx_mem_phys, ep->intx_mem,
> +				      epc->mem->window.page_size);
> +
>  	pci_epc_mem_free_addr(epc, ep->msi_mem_phys, ep->msi_mem,
>  			      epc->mem->window.page_size);
>  
> diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
> index c626d21243b0..812c221b3f7c 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.h
> +++ b/drivers/pci/controller/dwc/pcie-designware.h
> @@ -365,6 +365,8 @@ struct dw_pcie_ep {
>  	unsigned long		*ob_window_map;
>  	void __iomem		*msi_mem;
>  	phys_addr_t		msi_mem_phys;
> +	void __iomem		*intx_mem;
> +	phys_addr_t		intx_mem_phys;
>  	struct pci_epf_bar	*epf_bar[PCI_STD_NUM_BARS];
>  };
>  
> -- 
> 2.25.1
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux