Re: [PATCH] arm64: dts: qcom: qrb2210-rb1: Add regulators

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 11.07.2023 12:44, Dmitry Baryshkov wrote:
> On Tue, 11 Jul 2023 at 13:28, Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> wrote:
>>
>> Add and assign RPM regulators coming from PM2250.
>>
>> Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
>> ---
[...]

>> +               pm2250_l5: l5 {
>> +                       /* CSI/DSI */
>> +                       regulator-min-microvolts = <1232000>;
>> +                       regulator-max-microvolts = <1232000>;
>> +                       regulator-allow-set-load;
>> +                       regulator-boot-on;
> 
> why?
> 
To answer all of the questions in one go:

"it's because the regulator is enabled at boot"

Konrad
>> +               };
>> +
>> +               pm2250_l6: l6 {
>> +                       /* DRAM PLL */
>> +                       regulator-min-microvolts = <928000>;
>> +                       regulator-max-microvolts = <928000>;
>> +                       regulator-always-on;
>> +                       regulator-boot-on;
>> +               };
>> +
>> +               pm2250_l7: l7 {
>> +                       /* Wi-Fi CX/MX */
>> +                       regulator-min-microvolts = <664000>;
>> +                       regulator-max-microvolts = <664000>;
>> +               };
>> +
>> +               /*
>> +                * L8 - VDD_LPI_CX
>> +                * L9 - VDD_LPI_MX
>> +                */
>> +
>> +               pm2250_l10: l10 {
>> +                       /* Wi-Fi RFA */
>> +                       regulator-min-microvolts = <1300000>;
>> +                       regulator-max-microvolts = <1300000>;
>> +               };
>> +
>> +               pm2250_l11: l11 {
>> +                       /* GPS RF1 */
>> +                       regulator-min-microvolts = <1000000>;
>> +                       regulator-max-microvolts = <1000000>;
>> +                       regulator-boot-on;
> 
> Shouldn't it be handled by the modem on its own?
> 
>> +               };
>> +
>> +               pm2250_l12: l12 {
>> +                       /* USB PHYs */
>> +                       regulator-min-microvolts = <928000>;
>> +                       regulator-max-microvolts = <928000>;
>> +                       regulator-allow-set-load;
>> +                       regulator-boot-on;
> 
> You guess the question (and further on)
> 
>> +               };
>> +
>> +               pm2250_l13: l13 {
>> +                       /* USB/QFPROM/PLLs */
>> +                       regulator-min-microvolts = <1800000>;
>> +                       regulator-max-microvolts = <1800000>;
>> +                       regulator-allow-set-load;
>> +                       regulator-boot-on;
>> +               };
>> +
>> +               pm2250_l14: l14 {
>> +                       /* SDHCI1 VQMMC */
>> +                       regulator-min-microvolts = <1800000>;
>> +                       regulator-max-microvolts = <1800000>;
>> +                       regulator-allow-set-load;
>> +                       /* Broken hardware, never turn it off! */
>> +                       regulator-always-on;
>> +               };
>> +
>> +               pm2250_l15: l15 {
>> +                       /* WCD/DSI/BT VDDIO */
>> +                       regulator-min-microvolts = <1800000>;
>> +                       regulator-max-microvolts = <1800000>;
>> +                       regulator-allow-set-load;
>> +                       regulator-always-on;
>> +                       regulator-boot-on;
>> +               };
>> +
>> +               pm2250_l16: l16 {
>> +                       /* GPS RF2 */
>> +                       regulator-min-microvolts = <1800000>;
>> +                       regulator-max-microvolts = <1800000>;
>> +                       regulator-boot-on;
>> +               };
>> +
>> +               pm2250_l17: l17 {
>> +                       regulator-min-microvolts = <3000000>;
>> +                       regulator-max-microvolts = <3000000>;
>> +               };
>> +
>> +               pm2250_l18: l18 {
>> +                       /* VDD_PXn */
>> +                       regulator-min-microvolts = <1800000>;
>> +                       regulator-max-microvolts = <1800000>;
>> +               };
>> +
>> +               pm2250_l19: l19 {
>> +                       /* VDD_PXn */
>> +                       regulator-min-microvolts = <1800000>;
>> +                       regulator-max-microvolts = <1800000>;
>> +               };
>> +
>> +               pm2250_l20: l20 {
>> +                       /* SDHCI1 VMMC */
>> +                       regulator-min-microvolts = <2856000>;
>> +                       regulator-max-microvolts = <2856000>;
>> +                       regulator-allow-set-load;
>> +               };
>> +
>> +               pm2250_l21: l21 {
>> +                       /* SDHCI2 VMMC */
>> +                       regulator-min-microvolts = <2960000>;
>> +                       regulator-max-microvolts = <3300000>;
>> +                       regulator-allow-set-load;
>> +                       regulator-boot-on;
>> +               };
>> +
>> +               pm2250_l22: l22 {
>> +                       /* Wi-Fi */
>> +                       regulator-min-microvolts = <3312000>;
>> +                       regulator-max-microvolts = <3312000>;
>> +               };
>> +       };
>> +};
>> +
>>  &sdhc_1 {
>> +       vmmc-supply = <&pm2250_l20>;
>> +       vqmmc-supply = <&pm2250_l14>;
>>         pinctrl-0 = <&sdc1_state_on>;
>>         pinctrl-1 = <&sdc1_state_off>;
>>         pinctrl-names = "default", "sleep";
>> @@ -61,6 +322,8 @@ &sdhc_1 {
>>  };
>>
>>  &sdhc_2 {
>> +       vmmc-supply = <&pm2250_l21>;
>> +       vqmmc-supply = <&pm2250_l4>;
>>         cd-gpios = <&tlmm 88 GPIO_ACTIVE_LOW>;
>>         pinctrl-0 = <&sdc2_state_on &sd_det_in_on>;
>>         pinctrl-1 = <&sdc2_state_off &sd_det_in_off>;
>> @@ -104,6 +367,9 @@ &usb {
>>  };
>>
>>  &usb_hsphy {
>> +       vdd-supply = <&pm2250_l12>;
>> +       vdda-pll-supply = <&pm2250_l13>;
>> +       vdda-phy-dpdm-supply = <&pm2250_l21>;
>>         status = "okay";
>>  };
>>
>>
>> ---
>> base-commit: 8e4b7f2f3d6071665b1dfd70786229c8a5d6c256
>> change-id: 20230711-topic-rb1_regulator-44c4ade93246
>>
>> Best regards,
>> --
>> Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
>>
> 
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux