On Mon, 22 May 2023 19:03:17 +0200, Sebastian Reichel wrote: > This adds RK3588 to the Rockchip Inno USB2 PHY driver. The RK3588 has four of > them. Two are used for USB2 and two are used by USB3 controllers (for USB2 > fallback mode). All of them can be used with this patchset. > > Changes since PATCHv2: > * https://lore.kernel.org/linux-phy/20230403202307.120562-1-sebastian.reichel@xxxxxxxxxxxxx/ > * Dropped patch adding the syscon compatible to the DT binding (applied by Heiko) > * Collected Reviewed-by from Rob Herring for DT binding patch (DT binding) > * Rebased to v6.4-rc1 > * Removed superfluous init found by Vinod Koul > * Added one additional patch improving the error message for missing phy-config > * Fixed address_cells=2 code to not break the PHY at offset 0. I didn't notice it with the > previous versions, since that PHY is used for USB3 on Rockchip evaluation board and I > only started working on that recently. > > [...] Applied, thanks! [1/7] dt-bindings: phy: rockchip,inno-usb2phy: add rk3588 commit: 26720f89ee6878ef505812e852a3e914b7cbfe44 [2/7] phy: phy-rockchip-inno-usb2: add rk3588 support commit: 52b99b871eb79637342660b46c900642483d4412 [3/7] phy: phy-rockchip-inno-usb2: add reset support commit: 44d88aa9ae81c79ccc47ba4ef85aeda968bc4a50 [4/7] phy: phy-rockchip-inno-usb2: add rk3588 phy tuning support commit: 7d508a92e4588a59b909e235667d515051dd5955 [5/7] phy: phy-rockchip-inno-usb2: simplify phy clock handling commit: f4ca578b9803601074ab0d9e366b5fcda504e5a6 [6/7] phy: phy-rockchip-inno-usb2: simplify getting match data commit: 2e5ead8478e8e4a7b3d63a2001c2f0022b2f5e1b [7/7] phy: phy-rockchip-inno-usb2: improve error message commit: e7254a4a7c444fa194440fa8dc73c7728e927162 Best regards, -- ~Vinod
