This series adds support for: - SERDES, WIZ DT nodes, Serdes lane control mux - MAIN CPSW2G nodes - DSS and DisplayPort-0 nodes Changelog v4->v5: - rebased the patches on linux-next tip. Changelog v3->v4: - add reg property to serdes_ln_ctrl and fix the node name again to get rid of dtbs_check error. - reorder reg, reg-names and ranges property for main_cpsw1. - correct the order for clocks in serdes_wiz nodes to fix dtbs_check warnings. - fix indentation in reg, reg-names and clock property for dss node. - add comments for the reg type in dss registers. Changelog v3->v2: - fix dtc warnings for 'scm_conf' and 'serdes_ln_ctrl' nodes (Checked all the changes of the series with W=12 option during build) - added clock-frequency for serdes_refclk along with other EVM changes This refclk is being used by all the instances of serdes_wiz which are disabled by default. So configuring refclk when the serdes nodes are used for the first time is okay. Changelog v1->v2: - Moved J784S4 EVM changes together to the last patch (Suggested by Andrew) v4 patch link: <https://lore.kernel.org/all/20230425131607.290707-1-j-choudhary@xxxxxx/> Rahul T R (2): arm64: dts: ti: k3-j784s4-main: Add DSS and DP-bridge node arm64: dts: ti: k3-j784s4-evm: Enable DisplayPort-0 Siddharth Vadapalli (3): arm64: dts: ti: k3-j784s4-main: Add system controller and SERDES lane mux arm64: dts: ti: k3-j784s4: Add Main CPSW2G node arm64: dts: ti: k3-j784s4: Add WIZ and SERDES PHY nodes arch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 164 ++++++++++ arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 335 +++++++++++++++++++++ 2 files changed, 499 insertions(+) -- 2.25.1
