On 28/06/2023 10:23, Artur Weber wrote: > Introduce support for the Galaxy Tab 3 8.0 series of boards: > > - Samsung Galaxy Tab 3 8.0 WiFi (SM-T310/lt01wifi) > - Samsung Galaxy Tab 3 8.0 3G (SM-T311/lt013g) > - Samsung Galaxy Tab 3 8.0 LTE (SM-T315/lt01lte) > > What works: > > - Display and backlight > - Touchscreen > - GPIO buttons, hall sensor > - WiFi and Bluetooth > - USB, fuel gauge, charging > - Accelerometer and magnetometer > - Audio: speaker, microphone, headset > - WiFi model only: light sensor > > Signed-off-by: Artur Weber <aweber.kernel@xxxxxxxxx> > --- > This is an updated version of "[PATCH v3 13/13] ARM: dts: exynos: Add Samsung > Galaxy Tab 3 8.0 boards"[1]. > > Changed in v5: > - Re-added disabled RTC node instead of deleting it with delete-node > > Changed in v4: > - Added touchkey keycodes > - Added audio nodes > - Added MMC aliases > - Fixed dtbs_check warnings > - Fixed indentation in pinctrl sleep state overrides > > Changed in v3: > - Addressed review comments > - Removed rtc node (RTC is provided by PMIC) > - Added CPU thermal node > - Fixed dtbs_check warnings > - Added common changes from next/dt > > Should pass dtbs_check with no errors, provided that the following patches > are present: > > Backlight node is adapted to changes from "[PATCH v2 1/4] dt-bindings: > backlight: lp855x: convert to YAML and modernize"[2]. The whole patchset > has been merged into the backlight tree. > > Touchkey keycode property is added by "[PATCH 1/2] dt-bindings: mms114: Add > linux,keycodes property for touch keys"[3]. So far only the bindings part > of the patch has been acked, otherwise everything is awaiting review. > > Display bindings have been added by "[PATCH v5 1/3] dt-bindings: display: > panel: Add Samsung S6D7AA0 LCD panel controller"[4]. These are already > reviewed and merged into the DRM tree. > > [1] https://lore.kernel.org/linux-devicetree/20230501195525.6268-14-aweber.kernel@xxxxxxxxx/ > [2] https://lore.kernel.org/linux-devicetree/20230519180728.2281-2-aweber.kernel@xxxxxxxxx/ > [3] https://lore.kernel.org/linux-devicetree/20230521145843.19489-2-aweber.kernel@xxxxxxxxx/ > [4] https://lore.kernel.org/linux-devicetree/20230519170354.29610-2-aweber.kernel@xxxxxxxxx/ > --- > arch/arm/boot/dts/Makefile | 3 + > arch/arm/boot/dts/exynos4212-tab3-3g8.dts | 29 + > arch/arm/boot/dts/exynos4212-tab3-lte8.dts | 44 + > arch/arm/boot/dts/exynos4212-tab3-wifi8.dts | 26 + > arch/arm/boot/dts/exynos4212-tab3.dtsi | 1310 +++++++++++++++++++ This does not apply. You rebased your work on some older version/tree, without new layout. Please work on linux-next. Best regards, Krzysztof
