The units assumed by the 'azoteq,top-speed', 'azoteq,bottom-speed'
and 'azoteq,gesture-dist' properties are unspecified; define them
according to the device's datasheet.
Signed-off-by: Jeff LaBundy <jeff@xxxxxxxxxxx>
---
.../bindings/input/azoteq,iqs7222.yaml | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml b/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml
index 9ddba7f2e7aa..4c8690b62ce0 100644
--- a/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml
+++ b/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml
@@ -521,16 +521,16 @@ patternProperties:
minimum: 0
maximum: 65535
description:
- Specifies the speed of movement after which coordinate filtering is
- no longer applied.
+ Specifies the speed (in coordinates traveled per conversion) after
+ which coordinate filtering is no longer applied.
azoteq,bottom-speed:
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 255
description:
- Specifies the speed of movement after which coordinate filtering is
- linearly reduced.
+ Specifies the speed (in coordinates traveled per conversion) after
+ which coordinate filtering is linearly reduced.
azoteq,bottom-beta:
$ref: /schemas/types.yaml#/definitions/uint32
@@ -595,10 +595,10 @@ patternProperties:
minimum: 0
maximum: 4080
description:
- Specifies the distance across which a swipe or flick gesture must
- travel in order to be acknowledged by the device. The number spec-
- ified for any one swipe or flick gesture applies to all remaining
- swipe or flick gestures.
+ Specifies the distance (in coordinates) across which a swipe or
+ flick gesture must travel in order to be acknowledged by the
+ device. The number specified for any one swipe or flick gesture
+ applies to all remaining swipe or flick gestures.
azoteq,gpio-select:
$ref: /schemas/types.yaml#/definitions/uint32-array
--
2.34.1
