Other drivers are following the following compatible string format for dts:
s/_/-/
Because some devices may still use the previous string, the new corrected
string is added to the of_device_id table.
Signed-off-by: Christophe Ricard <christophe-h.ricard@xxxxxx>
---
Documentation/devicetree/bindings/net/nfc/st21nfcb.txt | 4 ++--
drivers/nfc/st21nfcb/i2c.c | 1 +
2 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/nfc/st21nfcb.txt b/Documentation/devicetree/bindings/net/nfc/st21nfcb.txt
index 9005608..bb23707 100644
--- a/Documentation/devicetree/bindings/net/nfc/st21nfcb.txt
+++ b/Documentation/devicetree/bindings/net/nfc/st21nfcb.txt
@@ -1,7 +1,7 @@
* STMicroelectronics SAS. ST21NFCB NFC Controller
Required properties:
-- compatible: Should be "st,st21nfcb_i2c".
+- compatible: Should be "st,st21nfcb-i2c".
- clock-frequency: I²C work frequency.
- reg: address on the bus
- interrupt-parent: phandle for the interrupt gpio controller
@@ -20,7 +20,7 @@ Example (for ARM-based BeagleBoard xM with ST21NFCB on I2C2):
st21nfcb: st21nfcb@8 {
- compatible = "st,st21nfcb_i2c";
+ compatible = "st,st21nfcb-i2c";
reg = <0x08>;
clock-frequency = <400000>;
diff --git a/drivers/nfc/st21nfcb/i2c.c b/drivers/nfc/st21nfcb/i2c.c
index 01ba865..b65847c 100644
--- a/drivers/nfc/st21nfcb/i2c.c
+++ b/drivers/nfc/st21nfcb/i2c.c
@@ -373,6 +373,7 @@ static int st21nfcb_nci_i2c_remove(struct i2c_client *client)
#ifdef CONFIG_OF
static const struct of_device_id of_st21nfcb_i2c_match[] = {
+ { .compatible = "st,st21nfcb-i2c", },
{ .compatible = "st,st21nfcb_i2c", },
{}
};
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
