Re: [PATCH 01/11] iio: adc: Update bindings for ADC7 name used on QCOM PMICs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, 8 Jul 2023 12:58:25 +0530
Jishnu Prakash <quic_jprakash@xxxxxxxxxxx> wrote:

> The name used initially for this version of Qualcomm Technologies, Inc.
> PMIC ADC was ADC7, following the convention of calling the PMIC generation
> PMIC7. However, the names were later amended internally to ADC5 Gen2 and
> PMIC5 Gen2. In addition, the latest PMIC generation now is known as
> PMIC5 Gen3 with ADC5 Gen3 supported on it. With this addition, it makes more
> sense to correct the name for this version of ADCs to ADC5 Gen2 from ADC7.
> Since this affects ADC devices across some PMICs, update the names accordingly.
> 
> In order to avoid breaking the existing implementations of ADC7, add
> support for ADC5 Gen2 first now and remove the ADC7 support in a later
> patch.
> 
> Signed-off-by: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
Hi Jishnu.

Whilst I can appreciate why you've picked this particular approach to
deal with the renames I'm not sure it's the smoothest path - or the
easiest to review.

If doing a single patch for the complete rename was too much, perhaps
doing one header (or if it makes sense set of headers)
at a time would be easier to read?  With a final patch doing the compatible
addition.  Maybe let's see what other reviewers think though.

A few other comments inline,

Jonathan


> ---
>  .../bindings/iio/adc/qcom,spmi-vadc.yaml      | 21 +++--
>  .../bindings/thermal/qcom-spmi-adc-tm5.yaml   | 16 ++--
>  .../iio/qcom,spmi-adc5-gen2-pm8350.h          | 64 +++++++++++++
>  .../iio/qcom,spmi-adc5-gen2-pm8350b.h         | 89 +++++++++++++++++++
>  .../iio/qcom,spmi-adc5-gen2-pmk8350.h         | 47 ++++++++++
>  .../iio/qcom,spmi-adc5-gen2-pmr735a.h         | 29 ++++++
>  .../iio/qcom,spmi-adc5-gen2-pmr735b.h         | 28 ++++++
>  include/dt-bindings/iio/qcom,spmi-vadc.h      | 77 ++++++++++++++++
>  8 files changed, 354 insertions(+), 17 deletions(-)
>  create mode 100644 include/dt-bindings/iio/qcom,spmi-adc5-gen2-pm8350.h
>  create mode 100644 include/dt-bindings/iio/qcom,spmi-adc5-gen2-pm8350b.h
>  create mode 100644 include/dt-bindings/iio/qcom,spmi-adc5-gen2-pmk8350.h
>  create mode 100644 include/dt-bindings/iio/qcom,spmi-adc5-gen2-pmr735a.h
>  create mode 100644 include/dt-bindings/iio/qcom,spmi-adc5-gen2-pmr735b.h
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
> index ad7d6fc49de5..f886977de165 100644
> --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
> @@ -13,7 +13,7 @@ maintainers:
>  description: |
>    SPMI PMIC voltage ADC (VADC) provides interface to clients to read
>    voltage. The VADC is a 15-bit sigma-delta ADC.
> -  SPMI PMIC5/PMIC7 voltage ADC (ADC) provides interface to clients to read
> +  SPMI PMIC5/PMIC5 Gen2 voltage ADC (ADC) provides interface to clients to read
>    voltage. The VADC is a 16-bit sigma-delta ADC.
>  
>  properties:
> @@ -27,6 +27,7 @@ properties:
>            - qcom,spmi-adc5
>            - qcom,spmi-adc-rev2
>            - qcom,spmi-adc7
> +          - qcom,spmi-adc5-gen2

Alphabetical order (roughly given currently list). So I'd stick 
this after qcom,spmi-adc5

>  
>    reg:
>      description: VADC base address in the SPMI PMIC register map
> @@ -71,7 +72,7 @@ patternProperties:
>          description: |
>            ADC channel number.
>            See include/dt-bindings/iio/qcom,spmi-vadc.h
> -          For PMIC7 ADC, the channel numbers are specified separately per PMIC
> +          For PMIC5 Gen2 ADC, the channel numbers are specified separately per PMIC
>            in the PMIC-specific files in include/dt-bindings/iio/.
>  
>        label:
> @@ -114,7 +115,7 @@ patternProperties:
>                channel calibration. If property is not found, channel will be
>                calibrated with 0.625V and 1.25V reference channels, also
>                known as absolute calibration.
> -            - For compatible property "qcom,spmi-adc5", "qcom,spmi-adc7" and
> +            - For compatible property "qcom,spmi-adc5", "qcom,spmi-adc5-gen2" and
>                "qcom,spmi-adc-rev2", if this property is specified VADC will use
>                the VDD reference (1.875V) and GND for channel calibration. If
>                property is not found, channel will be calibrated with 0V and 1.25V
> @@ -213,7 +214,9 @@ allOf:
>        properties:
>          compatible:
>            contains:
> -            const: qcom,spmi-adc7
> +            enum :
> +                - qcom,spmi-adc7

There is a deprecated marking for dt-bindings. Might be good to use it here.

> +                - qcom,spmi-adc5-gen2
>  
>      then:
>        patternProperties:
> @@ -277,8 +280,8 @@ examples:
>      };
>U>;
> +                io-channels = <&pmk8350_vadc PMK8350_ADC5_GEN2_AMUX_THM1_100K_PU>;
>                  qcom,decimation = <340>;
>                  qcom,ratiometric;
>                  qcom,hw-settle-time-us = <200>;
> @@ -251,7 +251,7 @@ examples:
>  
>              conn-therm@1 {
>                  reg = <1>;
> -                io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
> +                io-channels = <&pmk8350_vadc PM8350_ADC5_GEN2_AMUX_THM4_100K_PU(1)>;
>                  qcom,avg-samples = <2>;
>                  qcom,ratiometric;
>                  qcom,hw-settle-time-us = <200>;






[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux