nxp,lpc1850-uart.txt binding is already covered by 8250.yaml, so remove
it.
Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
---
.../bindings/serial/nxp,lpc1850-uart.txt | 28 -------------------
1 file changed, 28 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/serial/nxp,lpc1850-uart.txt
diff --git a/Documentation/devicetree/bindings/serial/nxp,lpc1850-uart.txt b/Documentation/devicetree/bindings/serial/nxp,lpc1850-uart.txt
deleted file mode 100644
index 04e23e63ee4f..000000000000
--- a/Documentation/devicetree/bindings/serial/nxp,lpc1850-uart.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-* NXP LPC1850 UART
-
-Required properties:
-- compatible : "nxp,lpc1850-uart", "ns16550a".
-- reg : offset and length of the register set for the device.
-- interrupts : should contain uart interrupt.
-- clocks : phandle to the input clocks.
-- clock-names : required elements: "uartclk", "reg".
-
-Optional properties:
-- dmas : Two or more DMA channel specifiers following the
- convention outlined in bindings/dma/dma.txt
-- dma-names : Names for the dma channels, if present. There must
- be at least one channel named "tx" for transmit
- and named "rx" for receive.
-
-Since it's also possible to also use the of_serial.c driver all
-parameters from 8250.txt also apply but are optional.
-
-Example:
-uart0: serial@40081000 {
- compatible = "nxp,lpc1850-uart", "ns16550a";
- reg = <0x40081000 0x1000>;
- reg-shift = <2>;
- interrupts = <24>;
- clocks = <&ccu2 CLK_APB0_UART0>, <&ccu1 CLK_CPU_UART0>;
- clock-names = "uartclk", "reg";
-};
--
2.40.1
