This patchset contains the initial GPIO support for the Broadcom Cygnus SoC. Cygnus has 3 GPIO controllers: 1) the ASIU GPIO; 2) the chipCommonG GPIO; and 3) the ALWAYS-ON GPIO. All 3 types of GPIO controllers are supported by the same Cygnus GPIO driver Changes from v3: - Fix dt property tpyo - Fix incorrect GPIO compatible ID in device tree binding document example Changes from v2: - Consolidate different compatible IDs into "brcm,cygnus-gpio" - Get rid of redundant "no-interrupt" property Changes from v1: - Get rid of inline qualifier - Get rid of redundant check in the ISR - Other minor fixes to imrove code readability Ray Jui (5): gpio: Cygnus: define Broadcom Cygnus GPIO binding gpio: Cygnus: add GPIO driver ARM: mach-bcm: Enable GPIO support for Cygnus ARM: dts: enable GPIO for Broadcom Cygnus MAINTAINERS: Entry for Cygnus GPIO driver .../devicetree/bindings/gpio/brcm,cygnus-gpio.txt | 82 +++ MAINTAINERS | 7 + arch/arm/boot/dts/bcm-cygnus.dtsi | 30 + arch/arm/mach-bcm/Kconfig | 1 + drivers/gpio/Kconfig | 11 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-bcm-cygnus.c | 705 ++++++++++++++++++++ 7 files changed, 837 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/brcm,cygnus-gpio.txt create mode 100644 drivers/gpio/gpio-bcm-cygnus.c -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
