[PATCH v2 2/2] ARM: dts: bcm5301x: Add SEAMA compatibles

[Linus Walleij <linus.walleij@xxxxxxxxxx>]

This adds SEAMA compatibles to the firmware partition of these
two D-Link devices.

Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
 arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 1 +
 arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts | 1 +
 2 files changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
index 555fbe41dd8f..cf3000b07eea 100644
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
@@ -33,6 +33,7 @@ partitions {
 				#size-cells = <1>;
 
 				partition@0 {
+					compatible = "seama";
 					label = "firmware";
 					reg = <0x00000000 0x08000000>;
 				};
diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
index d945a20b06e0..3551f855ff20 100644
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
@@ -149,6 +149,7 @@ partitions {
 		 * partitions: this device uses SEAMA.
 		 */
 		firmware@0 {
+			compatible = "seama";
 			label = "firmware";
 			reg = <0x00000000 0x08000000>;
 		};

-- 
2.34.1