[RFT PATCH 1/2] arm64: tegra: correct audio-codec interrupt flag in P2972-0000

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning: GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE.

Correct the interrupt flags to a value used also in Tegra30 Beaver board
with this device.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
 arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
index 64a3398fe7a6..7c400e024332 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
@@ -2115,7 +2115,7 @@ rt5658: audio-codec@1a {
 				compatible = "realtek,rt5658";
 				reg = <0x1a>;
 				interrupt-parent = <&gpio>;
-				interrupts = <TEGRA194_MAIN_GPIO(S, 5) GPIO_ACTIVE_HIGH>;
+				interrupts = <TEGRA194_MAIN_GPIO(S, 5) IRQ_TYPE_EDGE_FALLING>;
 				clocks = <&bpmp TEGRA194_CLK_AUD_MCLK>;
 				clock-names = "mclk";
 				realtek,jd-src = <2>;
-- 
2.34.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux