Hi,
On Monday 08 December 2014 03:16 PM, Yunzhi Li wrote:
> This patche to add a generic PHY driver for ROCKCHIP usb PHYs,
%s/patche/patch
> currently this driver can support RK3288. The RK3288 SoC have
> three independent USB PHY IPs which are all configured through a
> set of registers located in the GRF (general register files)
> module.
>
> Signed-off-by: Yunzhi Li <lyz@xxxxxxxxxxxxxx>
>
> ---
>
> Changes in v3:
> - Use BIT macro instead of bit shift ops.
> - Rename the config entry to PHY_ROCKCHIP_USB.
>
> drivers/phy/Kconfig | 7 ++
> drivers/phy/Makefile | 1 +
> drivers/phy/phy-rockchip-usb.c | 179 +++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 187 insertions(+)
> create mode 100644 drivers/phy/phy-rockchip-usb.c
>
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index ccad880..8a39d2a 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -239,6 +239,13 @@ config PHY_QCOM_IPQ806X_SATA
> depends on OF
> select GENERIC_PHY
>
> +config PHY_ROCKCHIP_USB2
> + tristate "Rockchip USB2 PHY Driver"
> + depends on ARCH_ROCKCHIP && OF
> + select GENERIC_PHY
> + help
> + Enable this to support the Rockchip USB 2.0 PHY.
> +
> config PHY_ST_SPEAR1310_MIPHY
> tristate "ST SPEAR1310-MIPHY driver"
> select GENERIC_PHY
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index aa74f96..8a13f72 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -28,6 +28,7 @@ phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o
> phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o
> obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o
> obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o
> +obj-$(CONFIG_PHY_ROCKCHIP_USB2) += phy-rockchip-usb.o
> obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o
> obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o
> obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o
> diff --git a/drivers/phy/phy-rockchip-usb.c b/drivers/phy/phy-rockchip-usb.c
> new file mode 100644
> index 0000000..98af043
> --- /dev/null
> +++ b/drivers/phy/phy-rockchip-usb.c
> @@ -0,0 +1,179 @@
> +/*
> + * Rockchip usb PHY driver
> + *
> + * Copyright (C) 2014 Yunzhi Li <lyz@xxxxxxxxxxxxxx>
> + * Copyright (C) 2014 ROCKCHIP, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/reset.h>
> +#include <linux/regmap.h>
> +#include <linux/mfd/syscon.h>
> +
> +#define ROCKCHIP_RK3288_UOC(n) (0x320 + n * 0x14)
> +
> +#define SIDDQ_MSK BIT(13 + 16)
This doesn't look correct. Won't this mask bit no:29?
> +#define SIDDQ_ON BIT(13)
> +#define SIDDQ_OFF (0 << 13)
> +
> +enum rk3288_phy_id {
rockchip_usb_phy_id?
> + RK3288_OTG,
> + RK3288_HOST0,
> + RK3288_HOST1,
> + RK3288_NUM_PHYS,
> +};
> +
> +struct rockchip_usb_phy {
> + struct regmap *reg_base;
> + unsigned int reg_offset;
> + struct clk *clk;
> + struct phy *phy;
> +};
> +
> +static int rockchip_usb_phy_power(struct rockchip_usb_phy *phy,
> + bool siddq)
> +{
> + return regmap_write(phy->reg_base, phy->reg_offset,
> + SIDDQ_MSK | (siddq ? SIDDQ_ON : SIDDQ_OFF));
> +}
> +
> +static int rockchip_usb_phy_power_off(struct phy *_phy)
> +{
> + struct rockchip_usb_phy *phy = phy_get_drvdata(_phy);
> + int ret = 0;
> +
> + /* Power down usb phy analog blocks by set siddq 1*/
> + ret = rockchip_usb_phy_power(phy, 1);
> + if (ret)
> + return ret;
> +
> + clk_disable_unprepare(phy->clk);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> +static int rockchip_usb_phy_power_on(struct phy *_phy)
> +{
> + struct rockchip_usb_phy *phy = phy_get_drvdata(_phy);
> + int ret = 0;
> +
> + ret = clk_prepare_enable(phy->clk);
> + if (ret)
> + return ret;
> +
> + /* Power up usb phy analog blocks by set siddq 0*/
> + ret = rockchip_usb_phy_power(phy, 0);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> +static struct phy *rockchip_usb_phy_xlate(struct device *dev,
> + struct of_phandle_args *args)
> +{
> + struct rockchip_usb_phy *phy_array = dev_get_drvdata(dev);
> +
> + if (WARN_ON(args->args[0] == 0 || args->args[0] >= RK3288_NUM_PHYS))
> + return ERR_PTR(-ENODEV);
> +
> + return (phy_array + args->args[0])->phy;
> +}
> +
> +static struct phy_ops ops = {
> + .power_on = rockchip_usb_phy_power_on,
> + .power_off = rockchip_usb_phy_power_off,
> + .owner = THIS_MODULE,
> +};
> +
> +static int rockchip_usb_phy_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct rockchip_usb_phy *rk_phy;
> + struct rockchip_usb_phy *phy_array;
> + struct phy_provider *phy_provider;
> + struct regmap *grf;
> + char clk_name[16];
> + int i;
> +
> + grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,grf");
> + if (IS_ERR(grf)) {
> + dev_err(&pdev->dev, "Missing rockchip,grf property\n");
> + return PTR_ERR(grf);
> + }
> +
> + phy_array = devm_kzalloc(dev, RK3288_NUM_PHYS * sizeof(*rk_phy),
> + GFP_KERNEL);
> + if (!phy_array)
> + return -ENOMEM;
> +
> + for (i = 0; i < RK3288_NUM_PHYS; i++) {
Don't hardcode NUM_PHYS. All this has to come from dt. Model each PHYs as
subnode of the phy provider node and use it here.
Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
