[PATCH v2 4/4] arm64: dts: qcom: sm8250: Add interconnects and power-domains to QUPs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Describe the interconnect paths related to QUPs and add the power-domains
powering them.

This is required for icc sync_state, as otherwise QUP access is gated.

Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 286 +++++++++++++++++++++++++++++++++++
 1 file changed, 286 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 1efa07f2caff..5909f04c81de 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -370,6 +370,12 @@ CLUSTER_SLEEP_0: cluster-sleep-0 {
 		};
 	};
 
+	qup_virt: interconnect-qup-virt {
+		compatible = "qcom,sm8250-qup-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
 	cpu0_opp_table: opp-table-cpu0 {
 		compatible = "operating-points-v2";
 		opp-shared;
@@ -1022,6 +1028,13 @@ i2c14: i2c@880000 {
 				dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1038,6 +1051,12 @@ spi14: spi@880000 {
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd SM8250_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1054,6 +1073,13 @@ i2c15: i2c@884000 {
 				dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1070,6 +1096,12 @@ spi15: spi@884000 {
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd SM8250_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1086,6 +1118,13 @@ i2c16: i2c@888000 {
 				dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1102,6 +1141,12 @@ spi16: spi@888000 {
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd SM8250_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1118,6 +1163,13 @@ i2c17: i2c@88c000 {
 				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1134,6 +1186,12 @@ spi17: spi@88c000 {
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd SM8250_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1149,6 +1207,10 @@ uart17: serial@88c000 {
 				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SM8250_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				status = "disabled";
 			};
 
@@ -1163,6 +1225,13 @@ i2c18: i2c@890000 {
 				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1179,6 +1248,12 @@ spi18: spi@890000 {
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd SM8250_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1194,6 +1269,10 @@ uart18: serial@890000 {
 				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SM8250_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				status = "disabled";
 			};
 
@@ -1208,6 +1287,13 @@ i2c19: i2c@894000 {
 				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1224,6 +1310,12 @@ spi19: spi@894000 {
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd SM8250_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1276,6 +1368,13 @@ i2c0: i2c@980000 {
 				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1292,6 +1391,12 @@ spi0: spi@980000 {
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd SM8250_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1308,6 +1413,13 @@ i2c1: i2c@984000 {
 				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1324,6 +1436,12 @@ spi1: spi@984000 {
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd SM8250_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1340,6 +1458,13 @@ i2c2: i2c@988000 {
 				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1356,6 +1481,12 @@ spi2: spi@988000 {
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd SM8250_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1371,6 +1502,10 @@ uart2: serial@988000 {
 				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SM8250_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				status = "disabled";
 			};
 
@@ -1385,6 +1520,13 @@ i2c3: i2c@98c000 {
 				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1401,6 +1543,12 @@ spi3: spi@98c000 {
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd SM8250_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1417,6 +1565,13 @@ i2c4: i2c@990000 {
 				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1433,6 +1588,12 @@ spi4: spi@990000 {
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd SM8250_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1449,6 +1610,13 @@ i2c5: i2c@994000 {
 				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1465,6 +1633,12 @@ spi5: spi@994000 {
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd SM8250_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1481,6 +1655,13 @@ i2c6: i2c@998000 {
 				dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 6 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1497,6 +1678,12 @@ spi6: spi@998000 {
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd SM8250_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1512,6 +1699,10 @@ uart6: serial@998000 {
 				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SM8250_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				status = "disabled";
 			};
 
@@ -1526,6 +1717,13 @@ i2c7: i2c@99c000 {
 				dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 7 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1542,6 +1740,12 @@ spi7: spi@99c000 {
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd SM8250_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1591,6 +1795,13 @@ i2c8: i2c@a80000 {
 				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1607,6 +1818,12 @@ spi8: spi@a80000 {
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd SM8250_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1623,6 +1840,13 @@ i2c9: i2c@a84000 {
 				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1639,6 +1863,12 @@ spi9: spi@a84000 {
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd SM8250_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1655,6 +1885,13 @@ i2c10: i2c@a88000 {
 				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1671,6 +1908,12 @@ spi10: spi@a88000 {
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd SM8250_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1687,6 +1930,13 @@ i2c11: i2c@a8c000 {
 				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1703,6 +1953,12 @@ spi11: spi@a8c000 {
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd SM8250_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1719,6 +1975,13 @@ i2c12: i2c@a90000 {
 				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1735,6 +1998,12 @@ spi12: spi@a90000 {
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd SM8250_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1750,6 +2019,10 @@ uart12: serial@a90000 {
 				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SM8250_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				status = "disabled";
 			};
 
@@ -1764,6 +2037,13 @@ i2c13: i2c@a94000 {
 				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1780,6 +2060,12 @@ spi13: spi@a94000 {
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd SM8250_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";

-- 
2.41.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux