On 2.07.2023 15:43, Dmitry Baryshkov wrote:
> Move pm8058 device nodes to follow the alphanumberic sorting order.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Konrad
> arch/arm/boot/dts/qcom/pm8058.dtsi | 90 +++++++++++++++---------------
> 1 file changed, 45 insertions(+), 45 deletions(-)
>
> diff --git a/arch/arm/boot/dts/qcom/pm8058.dtsi b/arch/arm/boot/dts/qcom/pm8058.dtsi
> index ad581c3bcbd2..913a511719fa 100644
> --- a/arch/arm/boot/dts/qcom/pm8058.dtsi
> +++ b/arch/arm/boot/dts/qcom/pm8058.dtsi
> @@ -8,15 +8,24 @@ pm8058: pmic {
> #address-cells = <1>;
> #size-cells = <0>;
>
> - pm8058_gpio: gpio@150 {
> - compatible = "qcom,pm8058-gpio",
> - "qcom,ssbi-gpio";
> - reg = <0x150>;
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - gpio-controller;
> - gpio-ranges = <&pm8058_gpio 0 0 44>;
> - #gpio-cells = <2>;
> + pwrkey@1c {
> + compatible = "qcom,pm8058-pwrkey";
> + reg = <0x1c>;
> + interrupt-parent = <&pm8058>;
> + interrupts = <50 1>, <51 1>;
> + debounce = <15625>;
> + pull-up;
> + };
> +
> + pm8058_led48: led@48 {
> + compatible = "qcom,pm8058-keypad-led";
> + reg = <0x48>;
> + status = "disabled";
> + };
> +
> + vibrator@4a {
> + compatible = "qcom,pm8058-vib";
> + reg = <0x4a>;
> };
>
> pm8058_mpps: mpps@50 {
> @@ -30,13 +39,22 @@ pm8058_mpps: mpps@50 {
> #interrupt-cells = <2>;
> };
>
> - pwrkey@1c {
> - compatible = "qcom,pm8058-pwrkey";
> - reg = <0x1c>;
> - interrupt-parent = <&pm8058>;
> - interrupts = <50 1>, <51 1>;
> - debounce = <15625>;
> - pull-up;
> + pm8058_led131: led@131 {
> + compatible = "qcom,pm8058-led";
> + reg = <0x131>;
> + status = "disabled";
> + };
> +
> + pm8058_led132: led@132 {
> + compatible = "qcom,pm8058-led";
> + reg = <0x132>;
> + status = "disabled";
> + };
> +
> + pm8058_led133: led@133 {
> + compatible = "qcom,pm8058-led";
> + reg = <0x133>;
> + status = "disabled";
> };
>
> pm8058_keypad: keypad@148 {
> @@ -49,6 +67,17 @@ pm8058_keypad: keypad@148 {
> row-hold = <91500>;
> };
>
> + pm8058_gpio: gpio@150 {
> + compatible = "qcom,pm8058-gpio",
> + "qcom,ssbi-gpio";
> + reg = <0x150>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + gpio-controller;
> + gpio-ranges = <&pm8058_gpio 0 0 44>;
> + #gpio-cells = <2>;
> + };
> +
> pm8058_xoadc: xoadc@197 {
> compatible = "qcom,pm8058-adc";
> reg = <0x197>;
> @@ -109,35 +138,6 @@ rtc@1e8 {
> interrupts = <39 1>;
> allow-set-time;
> };
> -
> - vibrator@4a {
> - compatible = "qcom,pm8058-vib";
> - reg = <0x4a>;
> - };
> -
> - pm8058_led48: led@48 {
> - compatible = "qcom,pm8058-keypad-led";
> - reg = <0x48>;
> - status = "disabled";
> - };
> -
> - pm8058_led131: led@131 {
> - compatible = "qcom,pm8058-led";
> - reg = <0x131>;
> - status = "disabled";
> - };
> -
> - pm8058_led132: led@132 {
> - compatible = "qcom,pm8058-led";
> - reg = <0x132>;
> - status = "disabled";
> - };
> -
> - pm8058_led133: led@133 {
> - compatible = "qcom,pm8058-led";
> - reg = <0x133>;
> - status = "disabled";
> - };
> };
> };
>
