On 6/27/2023 5:39 PM, Johan Hovold wrote:
On Wed, Jun 21, 2023 at 10:06:23AM +0530, Krishna Kurapati wrote:
Currently the DWC3 driver supports only single port controller
which requires at most one HS and one SS PHY.
But the DWC3 USB controller can be connected to multiple ports and
each port can have their own PHYs. Each port of the multiport
controller can either be HS+SS capable or HS only capable
Proper quantification of them is required to modify GUSB2PHYCFG
and GUSB3PIPECTL registers appropriately.
Add support for detecting, obtaining and configuring phy's supported
by a multiport controller and limit the max number of ports
supported to 4.
Signed-off-by: Harsh Agarwal <quic_harshq@xxxxxxxxxxx>
[Krishna: Modifed logic for generic phy and rebased the patch]
Signed-off-by: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
As I already said:
If Harsh is the primary author you need to add a From: line at
the beginning of the patch.
Either way, you need his SoB as well as your Co-developed-by tag.
All this is documented under Documentation/process/ somewhere.
The above is missing a From line and two Co-developed-by tags at least.
Hi Johan,
I tried to follow the following commit:
8030cb9a5568 ("soc: qcom: aoss: remove spurious IRQF_ONESHOT flags")
Let me know if that is not acceptable.
---
drivers/usb/dwc3/core.c | 252 ++++++++++++++++++++++++++++------------
drivers/usb/dwc3/core.h | 11 +-
drivers/usb/dwc3/drd.c | 15 ++-
3 files changed, 192 insertions(+), 86 deletions(-)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index e1ebae54454f..2ac72525de7d 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -120,10 +120,11 @@ void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode)
static void __dwc3_set_mode(struct work_struct *work)
{
struct dwc3 *dwc = work_to_dwc(work);
+ u32 desired_dr_role;
unsigned long flags;
int ret;
u32 reg;
- u32 desired_dr_role;
This is an unrelated change. Just add int i at the end.
I was trying to keep the reverse xmas order of variables.
+ int i;
mutex_lock(&dwc->mutex);
spin_lock_irqsave(&dwc->lock, flags);
@@ -746,23 +779,34 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
static int dwc3_phy_init(struct dwc3 *dwc)
{
int ret;
+ int i;
+ int j;
usb_phy_init(dwc->usb2_phy);
usb_phy_init(dwc->usb3_phy);
- ret = phy_init(dwc->usb2_generic_phy);
- if (ret < 0)
- goto err_shutdown_usb3_phy;
+ for (i = 0; i < dwc->num_usb2_ports; i++) {
+ ret = phy_init(dwc->usb2_generic_phy[i]);
+ if (ret < 0)
+ goto err_exit_usb2_phy;
+ }
- ret = phy_init(dwc->usb3_generic_phy);
- if (ret < 0)
- goto err_exit_usb2_phy;
+ for (i = 0; i < dwc->num_usb2_ports; i++) {
+ ret = phy_init(dwc->usb3_generic_phy[i]);
+ if (ret < 0)
+ goto err_exit_usb3_phy;
+ }
return 0;
+err_exit_usb3_phy:
+ for (j = i-1; j >= 0; j--)
Missing spaces around - here and below.
+ phy_exit(dwc->usb3_generic_phy[j]);
+ i = dwc->num_usb2_ports;
err_exit_usb2_phy:
- phy_exit(dwc->usb2_generic_phy);
-err_shutdown_usb3_phy:
+ for (j = i-1; j >= 0; j--)
+ phy_exit(dwc->usb2_generic_phy[j]);
+
Again:
The above is probably better implemented as a *single* loop over
num_usb2_ports where you enable each USB2 and USB3 PHY. On
errors you use the loop index to disable the already enabled
PHYs in reverse order below (after disabling the USB2 PHY if
USB3 phy init fails).
with emphasis on "single" added.
Oh, you mean something like this ?
for (loop over num_ports) {
ret = phy_init(dwc->usb3_generic_phy[i]);
if (ret != 0)
goto err_exit_phy;
ret = phy_init(dwc->usb2_generic_phy[i]);
if (ret != 0)
goto err_exit_phy;
}
err_exit_phy:
for (j = i-1; j >= 0; j--) {
phy_exit(dwc->usb3_generic_phy[j]);
phy_exit(dwc->usb2_generic_phy[j]);
}
usb_phy_shutdown(dwc->usb3_phy);
usb_phy_shutdown(dwc->usb2_phy);
@@ -781,23 +829,34 @@ static void dwc3_phy_exit(struct dwc3 *dwc)
static int dwc3_phy_power_on(struct dwc3 *dwc)
{
int ret;
+ int i;
+ int j;
usb_phy_set_suspend(dwc->usb2_phy, 0);
usb_phy_set_suspend(dwc->usb3_phy, 0);
- ret = phy_power_on(dwc->usb2_generic_phy);
- if (ret < 0)
- goto err_suspend_usb3_phy;
+ for (i = 0; i < dwc->num_usb2_ports; i++) {
+ ret = phy_power_on(dwc->usb2_generic_phy[i]);
+ if (ret < 0)
+ goto err_power_off_usb2_phy;
+ }
- ret = phy_power_on(dwc->usb3_generic_phy);
- if (ret < 0)
- goto err_power_off_usb2_phy;
+ for (i = 0; i < dwc->num_usb2_ports; i++) {
+ ret = phy_power_on(dwc->usb3_generic_phy[i]);
+ if (ret < 0)
+ goto err_power_off_usb3_phy;
+ }
Again: These loops should be merged too as for phy_init.
return 0;
+err_power_off_usb3_phy:
+ for (j = i-1; j >= 0; j--)
+ phy_power_off(dwc->usb3_generic_phy[i]);
+ i = dwc->num_usb2_ports;
err_power_off_usb2_phy:
- phy_power_off(dwc->usb2_generic_phy);
-err_suspend_usb3_phy:
+ for (j = i-1; j >= 0; j--)
+ phy_power_off(dwc->usb2_generic_phy[i]);
+
usb_phy_set_suspend(dwc->usb3_phy, 1);
usb_phy_set_suspend(dwc->usb2_phy, 1);
@@ -1290,7 +1358,9 @@ static int dwc3_core_get_phy(struct dwc3 *dwc)
{
struct device *dev = dwc->dev;
struct device_node *node = dev->of_node;
+ char phy_name[11];
int ret;
+ int i;
if (node) {
dwc->usb2_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 0);
@@ -1316,22 +1386,36 @@ static int dwc3_core_get_phy(struct dwc3 *dwc)
return dev_err_probe(dev, ret, "no usb3 phy configured\n");
}
- dwc->usb2_generic_phy = devm_phy_get(dev, "usb2-phy");
- if (IS_ERR(dwc->usb2_generic_phy)) {
- ret = PTR_ERR(dwc->usb2_generic_phy);
- if (ret == -ENOSYS || ret == -ENODEV)
- dwc->usb2_generic_phy = NULL;
+ for (i = 0; i < dwc->num_usb2_ports; i++) {
+ if (dwc->num_usb2_ports == 1)
+ sprintf(phy_name, "usb2-phy");
else
- return dev_err_probe(dev, ret, "no usb2 phy configured\n");
- }
+ sprintf(phy_name, "usb2-port%d", i);
+
+ dwc->usb2_generic_phy[i] = devm_phy_get(dev, phy_name);
+ if (IS_ERR(dwc->usb2_generic_phy[i])) {
+ ret = PTR_ERR(dwc->usb2_generic_phy[i]);
+ if (ret == -ENOSYS || ret == -ENODEV)
+ dwc->usb2_generic_phy[i] = NULL;
+ else
+ return dev_err_probe(dev, ret,
+ "no %s phy configured\n", phy_name);
I still believe
"failed to lookup phy %s"
is better.
+ }
- dwc->usb3_generic_phy = devm_phy_get(dev, "usb3-phy");
- if (IS_ERR(dwc->usb3_generic_phy)) {
- ret = PTR_ERR(dwc->usb3_generic_phy);
- if (ret == -ENOSYS || ret == -ENODEV)
- dwc->usb3_generic_phy = NULL;
+ if (dwc->num_usb2_ports == 1)
+ sprintf(phy_name, "usb3-phy");
else
- return dev_err_probe(dev, ret, "no usb3 phy configured\n");
+ sprintf(phy_name, "usb3-port%d", i);
+
+ dwc->usb3_generic_phy[i] = devm_phy_get(dev, phy_name);
+ if (IS_ERR(dwc->usb3_generic_phy[i])) {
+ ret = PTR_ERR(dwc->usb3_generic_phy[i]);
+ if (ret == -ENOSYS || ret == -ENODEV)
+ dwc->usb3_generic_phy[i] = NULL;
+ else
+ return dev_err_probe(dev, ret,
+ "no %s phy configured\n", phy_name);
Same here.
+ }
}
return 0;
@@ -1821,6 +1908,9 @@ static int dwc3_read_port_info(struct dwc3 *dwc)
dev_dbg(dwc->dev, "hs-ports: %u ss-ports: %u\n",
dwc->num_usb2_ports, dwc->num_usb3_ports);
+ if (dwc->num_usb2_ports > DWC3_MAX_PORTS)
+ ret = -ENOMEM;
You also need to add a check for num_usb3_ports as I already mentioned.
+
iounmap(base);
return ret;
}
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 42fb17aa66fa..b2bab23ca22b 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -37,6 +37,9 @@
#define XHCI_EXT_PORT_MINOR(x) (((x) >> 16) & 0xff)
#define XHCI_EXT_PORT_COUNT(x) (((x) >> 8) & 0xff)
+/* Number of ports supported by a multiport controller */
+#define DWC3_MAX_PORTS 4
You did not answer my question about whether this was an arbitrary
implementation limit (i.e. just reflecting the only currently supported
multiport controller)?
I mentioned in commit text that it is limited to 4. Are you referring to
state the reason why I chose the value 4 ?
+
#define DWC3_MSG_MAX 500
/* Global constants */
@@ -1031,8 +1034,8 @@ struct dwc3_scratchpad_array {
* @usb_psy: pointer to power supply interface.
* @usb2_phy: pointer to USB2 PHY
* @usb3_phy: pointer to USB3 PHY
- * @usb2_generic_phy: pointer to USB2 PHY
- * @usb3_generic_phy: pointer to USB3 PHY
+ * @usb2_generic_phy: pointer to array of USB2 PHY
+ * @usb3_generic_phy: pointer to array of USB3 PHY
* @num_usb2_ports: number of USB2 ports.
* @num_usb3_ports: number of USB3 ports.
* @phys_ready: flag to indicate that PHYs are ready
@@ -1171,8 +1174,8 @@ struct dwc3 {
struct usb_phy *usb2_phy;
struct usb_phy *usb3_phy;
- struct phy *usb2_generic_phy;
- struct phy *usb3_generic_phy;
+ struct phy *usb2_generic_phy[DWC3_MAX_PORTS];
+ struct phy *usb3_generic_phy[DWC3_MAX_PORTS];
u8 num_usb2_ports;
u8 num_usb3_ports;
diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c
index 039bf241769a..18a247ff75ac 100644
--- a/drivers/usb/dwc3/drd.c
+++ b/drivers/usb/dwc3/drd.c
@@ -327,10 +327,11 @@ static void dwc3_otg_device_exit(struct dwc3 *dwc)
void dwc3_otg_update(struct dwc3 *dwc, bool ignore_idstatus)
{
+ unsigned long flags;
int ret;
u32 reg;
int id;
- unsigned long flags;
+ int i;
if (dwc->dr_mode != USB_DR_MODE_OTG)
return;
@@ -386,9 +387,11 @@ void dwc3_otg_update(struct dwc3 *dwc, bool ignore_idstatus)
} else {
if (dwc->usb2_phy)
otg_set_vbus(dwc->usb2_phy->otg, true);
- if (dwc->usb2_generic_phy)
- phy_set_mode(dwc->usb2_generic_phy,
- PHY_MODE_USB_HOST);
+ for (i = 0; i < dwc->num_usb2_ports; i++) {
+ if (dwc->usb2_generic_phy[i])
+ phy_set_mode(dwc->usb2_generic_phy[i],
+ PHY_MODE_USB_HOST);
While not strictly necessary, adding bracket around multiline statements
is usually preferred as it improves readability.
+ }
}
break;
case DWC3_OTG_ROLE_DEVICE:
@@ -400,8 +403,8 @@ void dwc3_otg_update(struct dwc3 *dwc, bool ignore_idstatus)
if (dwc->usb2_phy)
otg_set_vbus(dwc->usb2_phy->otg, false);
- if (dwc->usb2_generic_phy)
- phy_set_mode(dwc->usb2_generic_phy,
+ if (dwc->usb2_generic_phy[0])
+ phy_set_mode(dwc->usb2_generic_phy[0],
PHY_MODE_USB_DEVICE);
Same here, but this is probably better just left at 85 columns after
removing the line break.
ret = dwc3_gadget_init(dwc);
if (ret)
Johan
Thanks,
Krishna,
