Hi, Julien: Julien Stephan <jstephan@xxxxxxxxxxxx> 於 2023年6月30日 週五 下午6:05寫道： > > From: Louis Kuo <louis.kuo@xxxxxxxxxxxx> > > This will add the mediatek ISP3.0 seninf (sensor interface) driver found > on several Mediatek SoCs such as the mt8365. > > Then seninf module has 4 physical CSI-2 inputs. Depending on the soc they > may not be all connected. > > Signed-off-by: Louis Kuo <louis.kuo@xxxxxxxxxxxx> > Signed-off-by: Phi-bang Nguyen <pnguyen@xxxxxxxxxxxx> > Signed-off-by: Florian Sylvestre <fsylvestre@xxxxxxxxxxxx> > Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> > Signed-off-by: Julien Stephan <jstephan@xxxxxxxxxxxx> > --- > MAINTAINERS | 1 + > drivers/media/platform/mediatek/Kconfig | 1 + > drivers/media/platform/mediatek/Makefile | 1 + > drivers/media/platform/mediatek/isp/Kconfig | 2 + > drivers/media/platform/mediatek/isp/Makefile | 3 + > .../platform/mediatek/isp/isp_30/Kconfig | 16 + > .../platform/mediatek/isp/isp_30/Makefile | 3 + > .../mediatek/isp/isp_30/seninf/Makefile | 5 + > .../mediatek/isp/isp_30/seninf/mtk_seninf.c | 1561 +++++++++++++++++ > .../isp/isp_30/seninf/mtk_seninf_reg.h | 99 ++ I think it's not necessary to create a folder isp_30 inside isp and you could just place all file in isp folder because there are only few files. After adding more and more files then we consider to create folder to separate them. Regards, Chun-Kuang. > 10 files changed, 1692 insertions(+) > create mode 100644 drivers/media/platform/mediatek/isp/Kconfig > create mode 100644 drivers/media/platform/mediatek/isp/Makefile > create mode 100644 drivers/media/platform/mediatek/isp/isp_30/Kconfig > create mode 100644 drivers/media/platform/mediatek/isp/isp_30/Makefile > create mode 100644 drivers/media/platform/mediatek/isp/isp_30/seninf/Makefile > create mode 100644 drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf.c > create mode 100644 drivers/media/platform/mediatek/isp/isp_30/seninf/mtk_seninf_reg.h > >
