On 30/06/2023 19:27, ocfox wrote: > king3399 is a bord from Rongpin, you can find detail about > it here: > (http://www.rpdzkj.com/copy_2_1703937_175104_2536441.html) > > This patch add basic node for the board and make it able to bring > up. > > Works: > - USB, type-C port > - Ethernet > - WiFi/BT > - HDMI > - eMMC > - PCIe > - sd-card > > Not test for other peripheral: > - AUDIO > - MIC > - SIM > - MIPI > > Signed-off-by: ocfox <i@xxxxxxxx> > --- > arch/arm64/boot/dts/rockchip/Makefile | 1 + > .../boot/dts/rockchip/rk3399-king3399.dts | 1077 +++++++++++++++++ > 2 files changed, 1078 insertions(+) > create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-king3399.dts > > diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile > index b7fb908eb92d..73ebee6ef430 100644 > --- a/arch/arm64/boot/dts/rockchip/Makefile > +++ b/arch/arm64/boot/dts/rockchip/Makefile > @@ -42,6 +42,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-hugsun-x99.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-khadas-edge.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-khadas-edge-captain.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-khadas-edge-v.dtb > +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-king3399.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-kobol-helios64.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-leez-p710.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopc-t4.dtb > diff --git a/arch/arm64/boot/dts/rockchip/rk3399-king3399.dts b/arch/arm64/boot/dts/rockchip/rk3399-king3399.dts > new file mode 100644 > index 000000000000..5d68add63d59 > --- /dev/null > +++ b/arch/arm64/boot/dts/rockchip/rk3399-king3399.dts > @@ -0,0 +1,1077 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. > + * > + * Copyright (c) 2023 ocfox <i@xxxxxxxx> > + */ > + > +/dts-v1/; > +#include <dt-bindings/pwm/pwm.h> > +#include <dt-bindings/input/input.h> > +#include <dt-bindings/usb/pd.h> > +#include "rk3399.dtsi" > +#include "rk3399-opp.dtsi" > + > +/ { > + model = "KING3399 RK3399 Board"; > + compatible = "rockchip,king3399", "rockchip,rk3399"; Missing bindings patch. Looks like wrong vendor prefix - you called this board "Rongpin", not "Rockchip". > + > + aliases { > + mmc0 = &sdio0; > + mmc1 = &sdmmc; > + mmc2 = &sdhci; > + }; > + > + chosen { > + stdout-path = "serial2:1500000n8"; > + }; > + > + clkin_gmac: external-gmac-clock { > + compatible = "fixed-clock"; > + clock-frequency = <125000000>; > + clock-output-names = "clkin_gmac"; > + #clock-cells = <0>; > + }; > + > + adc-keys { > + compatible = "adc-keys"; > + io-channels = <&saradc 1>; > + io-channel-names = "buttons"; > + keyup-threshold-microvolt = <1800000>; > + poll-interval = <100>; > + > + button-up { > + label = "Volume Up"; > + linux,code = <KEY_VOLUMEUP>; > + press-threshold-microvolt = <100000>; > + }; > + > + button-down { > + label = "Volume Down"; > + linux,code = <KEY_VOLUMEDOWN>; > + press-threshold-microvolt = <300000>; > + }; > + > + back { It does not look like you tested the DTS against bindings. Please run `make dtbs_check` (see Documentation/devicetree/bindings/writing-schema.rst or https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/ for instructions). > + label = "Back"; > + linux,code = <KEY_BACK>; > + press-threshold-microvolt = <985000>; > + }; > + }; > + > + keys: gpio-keys { > + compatible = "gpio-keys"; // poweroff not sure > + autorepeat; > + > + power { It does not look like you tested the DTS against bindings. Please run `make dtbs_check` (see Documentation/devicetree/bindings/writing-schema.rst or https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/ for instructions). > + debounce-interval = <100>; > + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; > + label = "GPIO Power"; > + linux,code = <KEY_POWER>; > + linux,input-type = <1>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pwr_btn>; > + wakeup-source; > + }; > + }; > + > + ir-receiver { > + compatible = "gpio-ir-receiver"; > + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; // bsp > + pinctrl-names = "default"; > + pinctrl-0 = <&ir_int>; > + }; > + > + backlight: backlight { > + status = "disabled"; > + compatible = "pwm-backlight"; > + brightness-levels = < > + 0 1 2 3 4 5 6 7 > + 8 9 10 11 12 13 14 15 > + 16 17 18 19 20 21 22 23 > + 24 25 26 27 28 29 30 31 > + 32 33 34 35 36 37 38 39 > + 40 41 42 43 44 45 46 47 > + 48 49 50 51 52 53 54 55 > + 56 57 58 59 60 61 62 63 > + 64 65 66 67 68 69 70 71 > + 72 73 74 75 76 77 78 79 > + 80 81 82 83 84 85 86 87 > + 88 89 90 91 92 93 94 95 > + 96 97 98 99 100 101 102 103 > + 104 105 106 107 108 109 110 111 > + 112 113 114 115 116 117 118 119 > + 120 121 122 123 124 125 126 127 > + 128 129 130 131 132 133 134 135 > + 136 137 138 139 140 141 142 143 > + 144 145 146 147 148 149 150 151 > + 152 153 154 155 156 157 158 159 > + 160 161 162 163 164 165 166 167 > + 168 169 170 171 172 173 174 175 > + 176 177 178 179 180 181 182 183 > + 184 185 186 187 188 189 190 191 > + 192 193 194 195 196 197 198 199 > + 200 201 202 203 204 205 206 207 > + 208 209 210 211 212 213 214 215 > + 216 217 218 219 220 221 222 223 > + 224 225 226 227 228 229 230 231 > + 232 233 234 235 236 237 238 239 > + 240 241 242 243 244 245 246 247 > + 248 249 250 251 252 253 254 255>; > + default-brightness-level = <200>; > + enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; > + pwms = <&pwm0 0 25000 0>; > + }; > + > + sdio_pwrseq: sdio-pwrseq { > + compatible = "mmc-pwrseq-simple"; > + clocks = <&rk808 1>; > + clock-names = "ext_clock"; > + pinctrl-names = "default"; > + pinctrl-0 = <&wifi_reg_on_h>; > + > + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; > + }; > + > + /* switched by pmic_sleep */ > + vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { Use some consistent name suffixes or prefixes. Some of your regulators are regulators, some not. .... > + > + // vdd 5v: USB 2&3, USB Hub, Type-C, HDMI, MIPI, IR > + vcc5v0_host: vcc5v0-host-regulator { Like here > + compatible = "regulator-fixed"; > + enable-active-high; > + regulator-boot-on; > + gpio = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>; // bsp > + pinctrl-names = "default"; > + pinctrl-0 = <&vcc5v0_host_en>; > + regulator-name = "vcc5v0_host"; > + // regulator-always-on; Drop dead code > + vin-supply = <&vcc5v0_sys>; > + }; > + > + vcc5v0_typec0: vbus-typec-regulator { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; // bsp What is that "// bsp" comment? > + pinctrl-names = "default"; > + pinctrl-0 = <&vcc5v0_typec_en>; > + regulator-name = "vcc5v0_typec0"; > + vin-supply = <&vcc5v0_sys>; > + }; > + > + vcc_sys: vcc5v0_sys: vcc5v0-sys { // bsp > + compatible = "regulator-fixed"; > + regulator-name = "vcc5v0_sys"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + vin-supply = <&dc_12v>; > + }; > + > + > + dc_12v: vdd_12v: dc-12v { // dc_12v vdd_12V > + compatible = "regulator-fixed"; > + regulator-name = "dc_12v"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <12000000>; > + regulator-max-microvolt = <12000000>; > + }; > + > + rt5651-sound { // verify So it is not suitable to upstream. Drop unrelated comments or mark your patch as not for merging. > + status = "okay"; Drop, it's by default. > + compatible = "simple-audio-card"; > + pinctrl-names = "default"; > + pinctrl-0 = <&hp_det>; > + > + simple-audio-card,name = "realtek,rt5651-codec"; > + simple-audio-card,format = "i2s"; > + simple-audio-card,mclk-fs = <256>; > + simple-audio-card,hp-det-gpio = <&gpio4 RK_PD4 GPIO_ACTIVE_HIGH>; > + simple-audio-card,aux-devs = <&speaker_amp>; > + simple-audio-card,pin-switches = "Speaker"; > + simple-audio-card,widgets = > + "Microphone", "Mic Jack", > + "Headphone", "Headphones", > + "Speaker", "Speaker"; > + simple-audio-card,routing = > + "Mic Jack", "micbias1", > + "Headphones", "HPOL", > + "Headphones", "HPOR", > + "Speaker Amplifier INL", "HPOL", > + "Speaker Amplifier INR", "HPOR", > + "Speaker", "Speaker Amplifier OUTL", > + "Speaker", "Speaker Amplifier OUTR"; > + simple-audio-card,cpu { > + sound-dai = <&i2s0>; > + }; > + simple-audio-card,codec { > + sound-dai = <&rt5651>; > + }; > + }; > + > + speaker_amp: speaker-amplifier { // verify > + compatible = "simple-audio-amplifier"; > + pinctrl-names = "default"; > + pinctrl-0 = <&spk_ctl>; > + enable-gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; > + sound-name-prefix = "Speaker Amplifier"; > + vcc-supply = <&vcc5v0_sys>; > + }; > + > + leds { > + compatible = "gpio-leds"; > + pinctrl-names = "default"; > + pinctrl-0 = <&breathe_led_pin>; > + > + breathe_led: led-breathe-led { // bsp // vdd_12V > + label = "breathe_led"; > + linux,default-trigger = "heartbeat"; > + default-state = "off"; > + gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_LOW>; > + }; > + }; > + > + fan0: gpio-fan { // verify // vcc5v0_sys > + #cooling-cells = <2>; > + compatible = "gpio-fan"; > + gpio-fan,speed-map = <0 0 3000 1>; > + gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>; > + status = "okay"; > + }; Drop > + > + gpio-restart { > + compatible = "gpio-restart"; > + gpios = <&gpio1 RK_PD0 GPIO_ACTIVE_LOW>; > + pinctrl-names = "default"; > + pinctrl-0 = <&hub_rst>; > + priority = <200>; > + active-delay = <100>; > + inactive-delay = <10>; > + wait-delay = <100>; > + }; > + Drop stray blank line ... > + > +&i2c1 { > + i2c-scl-rising-time-ns = <300>; > + i2c-scl-falling-time-ns = <15>; > + status = "okay"; > + > + rt5651: rt5651@1a { Node names should be generic. See also explanation and list of examples in DT specification: https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation > + #sound-dai-cells = <0>; > + compatible = "realtek,rt5651"; > + reg = <0x1a>; > + clocks = <&cru SCLK_I2S_8CH_OUT>; > + clock-names = "mclk"; > + status = "okay"; > + }; > +}; > + > +&i2c2 { > + status = "okay"; > +}; > + > +// Used for HDMI > +&i2c3 { > + i2c-scl-rising-time-ns = <450>; > + i2c-scl-falling-time-ns = <15>; > + status = "okay"; > +}; > + > +// Type-C > +// Accelerometer > +// Touch Screen > +&i2c4 { > + clock-frequency = <400000>; > + i2c-scl-rising-time-ns = <450>; > + i2c-scl-falling-time-ns = <15>; > + status = "okay"; > + > + fusb302@22 { // bsp checked Node names should be generic. See also explanation and list of examples in DT specification: https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation Best regards, Krzysztof
