In (6468276 i2c: designware: make SCL and SDA falling time configurable) new device tree properties were added for setting the falling time of SDA and SCL. The device tree bindings doc had a typo in it: it forgot the "-ns" suffix for both properies in the prose of the bindings. I assume this is a typo because: * The source code includes the "-ns" * The example in the bindings includes the "-ns". Fix the typo. Signed-off-by: Doug Anderson <dianders@xxxxxxxxxxxx> Fixes: 6468276b2206 ("i2c: designware: make SCL and SDA falling time configurable") --- Documentation/devicetree/bindings/i2c/i2c-designware.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/i2c/i2c-designware.txt b/Documentation/devicetree/bindings/i2c/i2c-designware.txt index 5199b0c..fee26dc 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-designware.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-designware.txt @@ -14,10 +14,10 @@ Optional properties : - i2c-sda-hold-time-ns : should contain the SDA hold time in nanoseconds. This option is only supported in hardware blocks version 1.11a or newer. - - i2c-scl-falling-time : should contain the SCL falling time in nanoseconds. + - i2c-scl-falling-time-ns : should contain the SCL falling time in nanoseconds. This value which is by default 300ns is used to compute the tLOW period. - - i2c-sda-falling-time : should contain the SDA falling time in nanoseconds. + - i2c-sda-falling-time-ns : should contain the SDA falling time in nanoseconds. This value which is by default 300ns is used to compute the tHIGH period. Example : -- 2.2.0.rc0.207.ga3a616c -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html