Hi Guoniu,
thanks for the patch series.
Am Donnerstag, 29. Juni 2023, 03:36:21 CEST schrieb guoniu.zhou@xxxxxxxxxxx:
> ********************
> Achtung externe E-Mail: Öffnen Sie Anhänge und Links nur, wenn Sie wissen,
> dass diese aus einer sicheren Quelle stammen und sicher sind. Leiten Sie
> die E-Mail im Zweifelsfall zur Prüfung an den IT-Helpdesk weiter.
> Attention external email: Open attachments and links only if you know that
> they are from a secure source and are safe. In doubt forward the email to
> the IT-Helpdesk to check it. ********************
>
> From: "Guoniu.zhou" <guoniu.zhou@xxxxxxx>
>
> i.MX93 use a different gasket which has different register definition
> compared with i.MX8. Hence implement the gasket callbacks in order to
> add ISI support for i.MX93.
>
> Signed-off-by: Guoniu.zhou <guoniu.zhou@xxxxxxx>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> ---
> .../platform/nxp/imx8-isi/imx8-isi-core.c | 15 ++++++++++
> .../platform/nxp/imx8-isi/imx8-isi-core.h | 2 ++
> .../platform/nxp/imx8-isi/imx8-isi-gasket.c | 30 +++++++++++++++++++
> 3 files changed, 47 insertions(+)
>
> diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c
> b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c index
> 5165f8960c2c..27bd18b7ee65 100644
> --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c
> +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c
> @@ -307,6 +307,20 @@ static const struct mxc_isi_plat_data mxc_imx8mp_data =
> { .has_36bit_dma = true,
> };
>
> +static const struct mxc_isi_plat_data mxc_imx93_data = {
> + .model = MXC_ISI_IMX93,
> + .num_ports = 1,
> + .num_channels = 1,
> + .reg_offset = 0,
> + .ier_reg = &mxc_imx8_isi_ier_v2,
> + .set_thd = &mxc_imx8_isi_thd_v1,
> + .clks = mxc_imx8mn_clks,
> + .num_clks = ARRAY_SIZE(mxc_imx8mn_clks),
> + .buf_active_reverse = true,
> + .gasket_ops = &mxc_imx93_gasket_ops,
> + .has_36bit_dma = false,
> +};
> +
> /*
> ---------------------------------------------------------------------------
> -- * Power management
> */
> @@ -518,6 +532,7 @@ static int mxc_isi_remove(struct platform_device *pdev)
> static const struct of_device_id mxc_isi_of_match[] = {
> { .compatible = "fsl,imx8mn-isi", .data = &mxc_imx8mn_data },
> { .compatible = "fsl,imx8mp-isi", .data = &mxc_imx8mp_data },
> + { .compatible = "fsl,imx93-isi", .data = &mxc_imx93_data },
> { /* sentinel */ },
> };
> MODULE_DEVICE_TABLE(of, mxc_isi_of_match);
> diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h
> b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h index
> 78ca047d93d1..2810ebe9b5f7 100644
> --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h
> +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h
> @@ -158,6 +158,7 @@ struct mxc_gasket_ops {
> enum model {
> MXC_ISI_IMX8MN,
> MXC_ISI_IMX8MP,
> + MXC_ISI_IMX93,
> };
>
> struct mxc_isi_plat_data {
> @@ -295,6 +296,7 @@ struct mxc_isi_dev {
> };
>
> extern const struct mxc_gasket_ops mxc_imx8_gasket_ops;
> +extern const struct mxc_gasket_ops mxc_imx93_gasket_ops;
>
> int mxc_isi_crossbar_init(struct mxc_isi_dev *isi);
> void mxc_isi_crossbar_cleanup(struct mxc_isi_crossbar *xbar);
> diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-gasket.c
> b/drivers/media/platform/nxp/imx8-isi/imx8-isi-gasket.c index
> 1d632dc60699..50ac1d3a2b6f 100644
> --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-gasket.c
> +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-gasket.c
> @@ -53,3 +53,33 @@ const struct mxc_gasket_ops mxc_imx8_gasket_ops = {
> .enable = mxc_imx8_gasket_enable,
> .disable = mxc_imx8_gasket_disable,
> };
> +
> +/*
> ---------------------------------------------------------------------------
> -- + * i.MX93 gasket
> + **/
> +
> +#define DISP_MIX_CAMERA_MUX 0x30
Which peripheral does this refer to? I would assume it is the Media Mix Domain
Block Control, but there is no register at 0x30 mentioned in the reference
manual. You have some additional information?
Also which type of input did you use? MIPI-CSI2 or parallel interface?
Thanks and best regards,
Alexander
> +#define DISP_MIX_CAMERA_MUX_DATA_TYPE(x) (((x) & 0x3f) << 3)
> +#define DISP_MIX_CAMERA_MUX_GASKET_ENABLE BIT(16)
> +static void mxc_imx93_gasket_enable(struct mxc_isi_dev *isi,
> + const struct v4l2_mbus_frame_desc
*fd,
> + const struct v4l2_mbus_framefmt
*fmt,
> + const unsigned int port)
> +{
> + u32 val;
> +
> + val = DISP_MIX_CAMERA_MUX_DATA_TYPE(fd->entry[0].bus.csi2.dt);
> + val |= DISP_MIX_CAMERA_MUX_GASKET_ENABLE;
> + regmap_write(isi->gasket, DISP_MIX_CAMERA_MUX, val);
> +}
> +
> +static void mxc_imx93_gasket_disable(struct mxc_isi_dev *isi,
> + unsigned int port)
> +{
> + regmap_write(isi->gasket, DISP_MIX_CAMERA_MUX, 0);
> +}
> +
> +const struct mxc_gasket_ops mxc_imx93_gasket_ops = {
> + .enable = mxc_imx93_gasket_enable,
> + .disable = mxc_imx93_gasket_disable,
> +};
--
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/
