Re: [PATCH v2 14/15] arm64: dts: qcom: sm6125: Add display hardware nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 27.06.2023 22:14, Marijn Suijten wrote:
> Add the DT nodes that describe the MDSS hardware on SM6125, containing
> one MDP (display controller) together with a single DSI and DSI PHY.  No
> DisplayPort support is added for now.
> 
> Signed-off-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

Konrad
>  arch/arm64/boot/dts/qcom/sm6125.dtsi | 191 ++++++++++++++++++++++++++++++++++-
>  1 file changed, 189 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
> index a5cc0d43d2d9..b21fa1256f95 100644
> --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
> @@ -1204,12 +1204,199 @@ sram@4690000 {
>  			reg = <0x04690000 0x10000>;
>  		};
>  
> +		mdss: display-subsystem@5e00000 {
> +			compatible = "qcom,sm6125-mdss";
> +			reg = <0x05e00000 0x1000>;
> +			reg-names = "mdss";
> +
> +			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-controller;
> +			#interrupt-cells = <1>;
> +
> +			clocks = <&gcc GCC_DISP_AHB_CLK>,
> +				 <&dispcc DISP_CC_MDSS_AHB_CLK>,
> +				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
> +			clock-names = "iface",
> +				      "ahb",
> +				      "core";
> +
> +			power-domains = <&dispcc MDSS_GDSC>;
> +
> +			iommus = <&apps_smmu 0x400 0x0>;
> +
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges;
> +
> +			status = "disabled";
> +
> +			mdss_mdp: display-controller@5e01000 {
> +				compatible = "qcom,sm6125-dpu";
> +				reg = <0x05e01000 0x83208>,
> +				      <0x05eb0000 0x2008>;
> +				reg-names = "mdp", "vbif";
> +
> +				interrupt-parent = <&mdss>;
> +				interrupts = <0>;
> +
> +				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
> +					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
> +					 <&dispcc DISP_CC_MDSS_ROT_CLK>,
> +					 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
> +					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
> +					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
> +				clock-names = "bus",
> +					      "iface",
> +					      "rot",
> +					      "lut",
> +					      "core",
> +					      "vsync";
> +				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
> +				assigned-clock-rates = <19200000>;
> +
> +				operating-points-v2 = <&mdp_opp_table>;
> +				power-domains = <&rpmpd SM6125_VDDCX>;
> +
> +				ports {
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +
> +					port@0 {
> +						reg = <0>;
> +						dpu_intf1_out: endpoint {
> +							remote-endpoint = <&mdss_dsi0_in>;
> +						};
> +					};
> +				};
> +
> +				mdp_opp_table: opp-table {
> +					compatible = "operating-points-v2";
> +
> +					opp-192000000 {
> +						opp-hz = /bits/ 64 <192000000>;
> +						required-opps = <&rpmpd_opp_low_svs>;
> +					};
> +
> +					opp-256000000 {
> +						opp-hz = /bits/ 64 <256000000>;
> +						required-opps = <&rpmpd_opp_svs>;
> +					};
> +
> +					opp-307200000 {
> +						opp-hz = /bits/ 64 <307200000>;
> +						required-opps = <&rpmpd_opp_svs_plus>;
> +					};
> +
> +					opp-384000000 {
> +						opp-hz = /bits/ 64 <384000000>;
> +						required-opps = <&rpmpd_opp_nom>;
> +					};
> +
> +					opp-400000000 {
> +						opp-hz = /bits/ 64 <400000000>;
> +						required-opps = <&rpmpd_opp_turbo>;
> +					};
> +				};
> +			};
> +
> +			mdss_dsi0: dsi@5e94000 {
> +				compatible = "qcom,sm6125-dsi-ctrl", "qcom,mdss-dsi-ctrl";
> +				reg = <0x05e94000 0x400>;
> +				reg-names = "dsi_ctrl";
> +
> +				interrupt-parent = <&mdss>;
> +				interrupts = <4>;
> +
> +				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
> +					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
> +					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
> +					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
> +					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
> +					 <&gcc GCC_DISP_HF_AXI_CLK>;
> +				clock-names = "byte",
> +					      "byte_intf",
> +					      "pixel",
> +					      "core",
> +					      "iface",
> +					      "bus";
> +				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
> +						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
> +				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
> +
> +				operating-points-v2 = <&dsi_opp_table>;
> +				power-domains = <&rpmpd SM6125_VDDCX>;
> +
> +				phys = <&mdss_dsi0_phy>;
> +				phy-names = "dsi";
> +
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				status = "disabled";
> +
> +				ports {
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +
> +					port@0 {
> +						reg = <0>;
> +						mdss_dsi0_in: endpoint {
> +							remote-endpoint = <&dpu_intf1_out>;
> +						};
> +					};
> +
> +					port@1 {
> +						reg = <1>;
> +						mdss_dsi0_out: endpoint {
> +						};
> +					};
> +				};
> +
> +				dsi_opp_table: opp-table {
> +					compatible = "operating-points-v2";
> +
> +					opp-164000000 {
> +						opp-hz = /bits/ 64 <164000000>;
> +						required-opps = <&rpmpd_opp_low_svs>;
> +					};
> +
> +					opp-187500000 {
> +						opp-hz = /bits/ 64 <187500000>;
> +						required-opps = <&rpmpd_opp_svs>;
> +					};
> +				};
> +			};
> +
> +			mdss_dsi0_phy: phy@5e94400 {
> +				compatible = "qcom,sm6125-dsi-phy-14nm";
> +				reg = <0x05e94400 0x100>,
> +				      <0x05e94500 0x300>,
> +				      <0x05e94800 0x188>;
> +				reg-names = "dsi_phy",
> +					    "dsi_phy_lane",
> +					    "dsi_pll";
> +
> +				#clock-cells = <1>;
> +				#phy-cells = <0>;
> +
> +				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
> +					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
> +				clock-names = "iface",
> +					      "ref";
> +
> +				required-opps = <&rpmpd_opp_svs>;
> +				power-domains = <&rpmpd SM6125_VDDMX>;
> +
> +				status = "disabled";
> +			};
> +		};
> +
>  		dispcc: clock-controller@5f00000 {
>  			compatible = "qcom,sm6125-dispcc";
>  			reg = <0x05f00000 0x20000>;
>  			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
> -				 <0>,
> -				 <0>,
> +				 <&mdss_dsi0_phy 0>,
> +				 <&mdss_dsi0_phy 1>,
>  				 <0>,
>  				 <0>,
>  				 <0>,
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux